Journal article · 2005 · Open access

Formation of Diamond-like Carbon Thin Films by Ion Beam Assisted Deposition Method

Isao Nakamura, Ichiro TAKANO, Michiko Sasaki, Masaru TAKASHIKA, Tomohumi KASIWAGI, Yohio SAWADA

Shinku, 48(3), 151–153 · Published 1 January 2005 · DOI 10.3131/jvsj.48.151

Open PDFView at the publisherCite this paper

In brief

“Formation of Diamond-like Carbon Thin Films by Ion Beam Assisted Deposition Method” is a 2005 journal article by Isao Nakamura and 5 co-authors, published in Shinku. OpenAlex counts 0 citations as of 17 November 2026. It is open access: the full text is free to read at Shinku.

Citations
0
References
7
Authors
6

Abstract

The mechanical properties of diamond-like carbon (DLC) thin films on SUS304 substrate have been studied. DLC thin films were prepared by the ion beam assisted deposition method. In this method, He+ ion irradiation was carried out in a C2H4 gas atmosphere. He+ ions were accelerated at an energy of 15 keV, and the ion beam current densities were changed from 10 to 100 μA/cm2. Atomic concentration and structure of the films were investigated by X-ray photoelectron spectroscopy and Raman spectroscopy. The mechanical properties of hardness and friction coefficient were determined using the Knoop hardness tester and the pin-on-disk tribometer.The DLC thin films had amorphous structure that composed chiefly of graphite and disorder of graphite states. The Knoop hardness of the films increased with increasing He+ ion current density, and the film prepared at a current density of 80 μA/cm2 showed the maximum Knoop hardness value of 890 kgf/cm2. The friction coefficient of the film prepared at a current density of 60 μA/cm2 indicated lower value than that of the other current densities. From these results, it was cleared that the mechanical properties and structure of DLC thin films were greatly affected by the He+ ion beam current density.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Nakamura, I., TAKANO, I., Sasaki, M., TAKASHIKA, M., KASIWAGI, T., & SAWADA, Y. (2005). Formation of Diamond-like Carbon Thin Films by Ion Beam Assisted Deposition Method. Shinku, 48(3), 151–153. https://doi.org/10.3131/jvsj.48.151

MLA 9

Nakamura, Isao, et al. “Formation of Diamond-like Carbon Thin Films by Ion Beam Assisted Deposition Method.” Shinku, vol. 48, no. 3, 2005, pp. 151–153. https://doi.org/10.3131/jvsj.48.151.

Chicago

Nakamura, Isao, Ichiro TAKANO, Michiko Sasaki, Masaru TAKASHIKA, Tomohumi KASIWAGI, and Yohio SAWADA. 2005. “Formation of Diamond-like Carbon Thin Films by Ion Beam Assisted Deposition Method.” Shinku 48 (3): 151–153. https://doi.org/10.3131/jvsj.48.151.

Harvard

Nakamura, I. et al. (2005) ‘Formation of Diamond-like Carbon Thin Films by Ion Beam Assisted Deposition Method’, Shinku, 48(3), pp. 151–153. doi:10.3131/jvsj.48.151.

IEEE

I. Nakamura, I. TAKANO, M. Sasaki, M. TAKASHIKA, T. KASIWAGI, and Y. SAWADA, “Formation of Diamond-like Carbon Thin Films by Ion Beam Assisted Deposition Method,” Shinku, vol. 48, no. 3, pp. 151–153, 2005, doi: 10.3131/jvsj.48.151.

BibTeX

@article{nakamura2005formation,
  title     = {{Formation of Diamond-like Carbon Thin Films by Ion Beam Assisted Deposition Method}},
  author    = {Nakamura, Isao and TAKANO, Ichiro and Sasaki, Michiko and TAKASHIKA, Masaru and KASIWAGI, Tomohumi and SAWADA, Yohio},
  journal   = {Shinku},
  year      = {2005},
  volume    = {48},
  number    = {3},
  pages     = {151--153},
  doi       = {10.3131/jvsj.48.151},
  url       = {https://doi.org/10.3131/jvsj.48.151}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • diamond-like carbon
  • thin films
  • ion beam assisted deposition
  • helium ion irradiation
  • ion beam current density
  • Knoop hardness
  • friction coefficient
  • graphite structure

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Nakamura, I., TAKANO, I., Sasaki, M., TAKASHIKA, M., KASIWAGI, T., & SAWADA, Y. (2005). Formation of Diamond-like Carbon Thin Films by Ion Beam Assisted Deposition Method. Shinku, 48(3), 151–153. https://doi.org/10.3131/jvsj.48.151

How many times has this paper been cited?

0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Shinku: sign in and open the PDF from this page.

Who wrote this paper?

Isao Nakamura, Ichiro TAKANO, Michiko Sasaki, Masaru TAKASHIKA, Tomohumi KASIWAGI, Yohio SAWADA.

What is the DOI of this paper?

10.3131/jvsj.48.151, permanently at https://doi.org/10.3131/jvsj.48.151. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.