Conference paper · 2012 · Open access

Flux Cored Arc Welding Parameter Optimization Using Particle Swarm Optimization Algorithm

D. Katherasan, Jiju V. Elias, P. Sathiya, A. Noorul Haq

Procedia Engineering, 38, 3913–3926 · Published 1 January 2012 · DOI 10.1016/j.proeng.2012.06.449

Open PDFView at the publisherCite this paper

In brief

“Flux Cored Arc Welding Parameter Optimization Using Particle Swarm Optimization Algorithm” is a 2012 conference paper by D. Katherasan and 3 co-authors, published in Procedia Engineering. OpenAlex counts 26 citations as of 22 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Procedia Engineering.

Citations
26
Most cited in
2017 (5)
Field-weighted impact
4.33
References
20
Authors
4

Abstract

Flux cored arc welding (FCAW) process is a fusion welding process in which the welding electrode is a tubular wire that is continuously fed to the weld area. It is widely used in industries and shipyards for welding heavy plates. Welding input parameters play a very significant role in determining the quality of a weld joint. This paper addresses the modeling of welding parameters in FCAW process using a set of experimental data and regression analysis, and optimization using Particle Swarm Optimization (PSO) Algorithm. The input process variables considered here include wire feed rate (F); voltage (V); welding speed (S) and torch Angle (A) each having 5 levels. The process output characteristics are weld bead width, reinforcement and depth of penetration. The Taguchi method and regression modeling are used in order to establish the relationships between input and output parameters. In the next stage, the proposed model is embedded into PSO algorithm to optimize the FCAW process parameters. In this study the objectives considered are maximization of depth of penetration, minimization of bead width and minimization of reinforcement. A comparative study on the effectiveness of the two algorithms on the optimization of the weld bead geometry is done

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Katherasan, D., Elias, J. V., Sathiya, P., & Haq, A. N. (2012). Flux Cored Arc Welding Parameter Optimization Using Particle Swarm Optimization Algorithm. Procedia Engineering, 38, 3913–3926. https://doi.org/10.1016/j.proeng.2012.06.449

MLA 9

Katherasan, D., et al. “Flux Cored Arc Welding Parameter Optimization Using Particle Swarm Optimization Algorithm.” Procedia Engineering, vol. 38, 2012, pp. 3913–3926. https://doi.org/10.1016/j.proeng.2012.06.449.

Chicago

Katherasan, D., Jiju V. Elias, P. Sathiya, and A. Noorul Haq. 2012. “Flux Cored Arc Welding Parameter Optimization Using Particle Swarm Optimization Algorithm.” Procedia Engineering 38: 3913–3926. https://doi.org/10.1016/j.proeng.2012.06.449.

Harvard

Katherasan, D. et al. (2012) ‘Flux Cored Arc Welding Parameter Optimization Using Particle Swarm Optimization Algorithm’, Procedia Engineering, 38, pp. 3913–3926. doi:10.1016/j.proeng.2012.06.449.

IEEE

D. Katherasan, J. V. Elias, P. Sathiya, and A. N. Haq, “Flux Cored Arc Welding Parameter Optimization Using Particle Swarm Optimization Algorithm,” Procedia Engineering, vol. 38, pp. 3913–3926, 2012, doi: 10.1016/j.proeng.2012.06.449.

BibTeX

@inproceedings{katherasan2012flux,
  title     = {{Flux Cored Arc Welding Parameter Optimization Using Particle Swarm Optimization Algorithm}},
  author    = {Katherasan, D. and Elias, Jiju V. and Sathiya, P. and Haq, A. Noorul},
  booktitle = {Procedia Engineering},
  year      = {2012},
  volume    = {38},
  pages     = {3913--3926},
  doi       = {10.1016/j.proeng.2012.06.449},
  url       = {https://doi.org/10.1016/j.proeng.2012.06.449}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201755
201833
201922
202011
202122
202211
202311
202422
202511
202622

Its field-weighted citation impact is 4.33: it has been cited 4.33 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses

  • flux-cored arc welding
  • welding parameter optimization
  • particle swarm optimization
  • Taguchi method
  • regression models
  • weld width
  • weld reinforcement
  • penetration depth

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Katherasan, D., Elias, J. V., Sathiya, P., & Haq, A. N. (2012). Flux Cored Arc Welding Parameter Optimization Using Particle Swarm Optimization Algorithm. Procedia Engineering, 38, 3913–3926. https://doi.org/10.1016/j.proeng.2012.06.449

How many times has this paper been cited?

26 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Procedia Engineering: sign in and open the PDF from this page.

Who wrote this paper?

D. Katherasan, Jiju V. Elias, P. Sathiya, A. Noorul Haq.

What is the DOI of this paper?

10.1016/j.proeng.2012.06.449, permanently at https://doi.org/10.1016/j.proeng.2012.06.449. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.