Journal article · 2020 · Open access

Finite-element modelling of NiTi shape-memory wires for morphing aerofoils

Wan Luqman Hakim Wan A Hamid, L. Iannucci, P. Robinson

The Aeronautical Journal, 124(1281), 1740–1760 · Published 24 June 2020 · DOI 10.1017/aer.2020.53

Open PDFView at the publisherCite this paper

In brief

“Finite-element modelling of NiTi shape-memory wires for morphing aerofoils” is a 2020 journal article by Wan Luqman Hakim Wan A Hamid and 2 co-authors, published in The Aeronautical Journal. OpenAlex counts 6 citations as of 22 November 2026. It is open access: the full text is free to read at The International Islamic University Malaysia Repository (The International Islamic University Malaysia).

Citations
6
Most cited in
2022 (2)
Field-weighted impact
0.26
References
29
Authors
3

Abstract

This paper presents the development and implementation of a user-defined material (UMAT) model for NiTi Shape-Memory Alloy (SMA) wires for use in LS-DYNA commercial explicit finite-element analysis software. The UMAT focusses on the Shape-Memory Effect (SME), which could be used for actuation of aerostructural components. The actuation of a fundamental structure consisting of an SMA wire connected in series with a linear spring was studied first. The SMA thermomechanical behaviour obtained from the finite-element simulation was compared with that obtained from the analytical solution in MATLAB. A further comparison is presented for an SMA-actuated cantilever beam, showing excellent agreement in terms of the SMA stress and strain as well as the tip deflection of the cantilever beam. A mesh sensitivity study on the SMA wire indicated that one beam element was adequate to accurately predict the SMA thermomechanical behaviour. An analysis of several key parameters showed that, to achieve a high recovery strain, the stiffness of the actuated structure should be minimised while the cross-sectional area of the SMA wire should be maximised. The actuation of an SMA wire under a constant stress/load was also analysed. The SMA material model was finally applied to the design of morphing aluminium and composite aerofoils consisting of corrugated sections, resulting in the prediction of reasonably large trailing-edge deflections (7.8–65.9 mm).

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Hamid, W. L. H. W. A., Iannucci, L., & Robinson, P. (2020). Finite-element modelling of NiTi shape-memory wires for morphing aerofoils. The Aeronautical Journal, 124(1281), 1740–1760. https://doi.org/10.1017/aer.2020.53

MLA 9

Hamid, Wan Luqman Hakim Wan A, et al. “Finite-element modelling of NiTi shape-memory wires for morphing aerofoils.” The Aeronautical Journal, vol. 124, no. 1281, 2020, pp. 1740–1760. https://doi.org/10.1017/aer.2020.53.

Chicago

Hamid, Wan Luqman Hakim Wan A, L. Iannucci, and P. Robinson. 2020. “Finite-element modelling of NiTi shape-memory wires for morphing aerofoils.” The Aeronautical Journal 124 (1281): 1740–1760. https://doi.org/10.1017/aer.2020.53.

Harvard

Hamid, W. L. H. W. A., Iannucci, L. and Robinson, P. (2020) ‘Finite-element modelling of NiTi shape-memory wires for morphing aerofoils’, The Aeronautical Journal, 124(1281), pp. 1740–1760. doi:10.1017/aer.2020.53.

IEEE

W. L. H. W. A. Hamid, L. Iannucci, and P. Robinson, “Finite-element modelling of NiTi shape-memory wires for morphing aerofoils,” The Aeronautical Journal, vol. 124, no. 1281, pp. 1740–1760, 2020, doi: 10.1017/aer.2020.53.

BibTeX

@article{hamid2020finite,
  title     = {{Finite-element modelling of NiTi shape-memory wires for morphing aerofoils}},
  author    = {Hamid, Wan Luqman Hakim Wan A and Iannucci, L. and Robinson, P.},
  journal   = {The Aeronautical Journal},
  year      = {2020},
  volume    = {124},
  number    = {1281},
  pages     = {1740--1760},
  doi       = {10.1017/aer.2020.53},
  url       = {https://doi.org/10.1017/aer.2020.53}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202222
202311
202522
202611

Its field-weighted citation impact is 0.26: it has been cited 0.26 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • NiTi
  • shape memory effect
  • user-defined material model
  • LS-DYNA
  • thermomechanical behavior
  • trailing edge deflection
  • recovery strain
  • mesh sensitivity

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Hamid, W. L. H. W. A., Iannucci, L., & Robinson, P. (2020). Finite-element modelling of NiTi shape-memory wires for morphing aerofoils. The Aeronautical Journal, 124(1281), 1740–1760. https://doi.org/10.1017/aer.2020.53

How many times has this paper been cited?

6 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at The International Islamic University Malaysia Repository (The International Islamic University Malaysia): sign in and open the PDF from this page.

Who wrote this paper?

Wan Luqman Hakim Wan A Hamid, L. Iannucci, P. Robinson.

What is the DOI of this paper?

10.1017/aer.2020.53, permanently at https://doi.org/10.1017/aer.2020.53. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.