Journal article · 2025 · Open access

Fast thermal annealing for manufacturing of silicon diodes and photodiodes

A. S. Kim, Natalya A. Perevedentseva, S. Yu. Yurchuk, Fedor D. Korzhov

Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering, 28(1), 34–43 · Published 4 April 2025 · DOI 10.17073/1609-3577j.met202501.634

Free PDFView at the publisherCite this paper

In brief

“Fast thermal annealing for manufacturing of silicon diodes and photodiodes” is a 2025 journal article by A. S. Kim and 3 co-authors, published in Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering. OpenAlex counts 0 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering.

Citations
0
References
11
Authors
4

Abstract

The influence of rapid thermal annealing (RTA) in hydrogen atmosphere on ohmic properties of double-layer composition Ti/Au as contact on р+-Si was investigated. Based on experimental results it was confirmed that RTA at 340 °С for 20 s in hydrogen atmosphere allows to obtain an ohmic contact with the minimum of resistivity. This is due to titanium silicides formation on the Si/Ti interface. It also known silicides formation on Si-interface with other transition metals such as Ni, Pd and Cr, which determines the application of RTA for obtaining ohmic contacts based on them. The applicability of RTA for manufacture technology of silicon diodes to reduce the serial resistance, which leads to increased yield rate of diodes, was confirmed by applying on a limited diode p+–n as an example. Also, the influence of RTA in hydrogen atmosphere on a dark current was investigated by applying on a silicon multi-element p–i–n photosensitive element (PE) as an example. Based on experimental results it was confirmed that RTA at 450 °С for 5 s improved dark current of the photosensitive areas and the guard ring and as a result increased yield rate of photodiodes. This is due to decreasing of the density of surface states and stabilization of charge properties of the SiO2/p-Si interface through saturation of dangling Si-bonds with hydrogen. This confirmed the applicability of RTA in hydrogen atmosphere for manufacture technology of photodiodes on high-resistance p-Si to reduce its dark current.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Kim, A. S., Perevedentseva, N. A., Yurchuk, S. Y., & Korzhov, F. D. (2025). Fast thermal annealing for manufacturing of silicon diodes and photodiodes. Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering, 28(1), 34–43. https://doi.org/10.17073/1609-3577j.met202501.634

MLA 9

Kim, A. S., et al. “Fast thermal annealing for manufacturing of silicon diodes and photodiodes.” Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering, vol. 28, no. 1, 2025, pp. 34–43. https://doi.org/10.17073/1609-3577j.met202501.634.

Chicago

Kim, A. S., Natalya A. Perevedentseva, S. Yu. Yurchuk, and Fedor D. Korzhov. 2025. “Fast thermal annealing for manufacturing of silicon diodes and photodiodes.” Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering 28 (1): 34–43. https://doi.org/10.17073/1609-3577j.met202501.634.

Harvard

Kim, A. S. et al. (2025) ‘Fast thermal annealing for manufacturing of silicon diodes and photodiodes’, Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering, 28(1), pp. 34–43. doi:10.17073/1609-3577j.met202501.634.

IEEE

A. S. Kim, N. A. Perevedentseva, S. Y. Yurchuk, and F. D. Korzhov, “Fast thermal annealing for manufacturing of silicon diodes and photodiodes,” Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering, vol. 28, no. 1, pp. 34–43, 2025, doi: 10.17073/1609-3577j.met202501.634.

BibTeX

@article{kim2025fast,
  title     = {{Fast thermal annealing for manufacturing of silicon diodes and photodiodes}},
  author    = {Kim, A. S. and Perevedentseva, Natalya A. and Yurchuk, S. Yu. and Korzhov, Fedor D.},
  journal   = {Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering},
  year      = {2025},
  volume    = {28},
  number    = {1},
  pages     = {34--43},
  doi       = {10.17073/1609-3577j.met202501.634},
  url       = {https://doi.org/10.17073/1609-3577j.met202501.634}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Semiconductor materials and interfaces

  • rapid thermal annealing
  • hydrogen atmosphere
  • ohmic contacts
  • titanium silicide
  • Ti/Au contacts
  • silicon diodes
  • photodiode
  • dark current

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Kim, A. S., Perevedentseva, N. A., Yurchuk, S. Y., & Korzhov, F. D. (2025). Fast thermal annealing for manufacturing of silicon diodes and photodiodes. Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering, 28(1), 34–43. https://doi.org/10.17073/1609-3577j.met202501.634

How many times has this paper been cited?

0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Izvestiya Vysshikh Uchebnykh Zavedenii Materialy Elektronnoi Tekhniki = Materials of Electronics Engineering.

Who wrote this paper?

A. S. Kim, Natalya A. Perevedentseva, S. Yu. Yurchuk, Fedor D. Korzhov.

What is the DOI of this paper?

10.17073/1609-3577j.met202501.634. The permanent link is https://doi.org/10.17073/1609-3577j.met202501.634.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.