Journal article · 2024 · Open access

Fabrication of hydrogenated amorphous silicon-based solar cells using RF-PECVD

Soni Prayogi, Wahyu Kunto Wibowo

International Journal of Applied Power Engineering (IJAPE), 14(1), 173 · Published 13 December 2024 · DOI 10.11591/ijape.v14.i1.pp173-179

Free PDFView at the publisherCite this paper

In brief

“Fabrication of hydrogenated amorphous silicon-based solar cells using RF-PECVD” is a 2024 journal article by Soni Prayogi and Wahyu Kunto Wibowo, published in International Journal of Applied Power Engineering (IJAPE). OpenAlex counts 0 citations as of 16 November 2026. It is open access under a CC BY-SA licence: the full text is free to read at International Journal of Applied Power Engineering (IJAPE).

Citations
0
References
40
Authors
2

Abstract

Thin-film solar cells made of hydrogenated amorphous silicon have succeeded in crystallization technologies as a less expensive alternative because of their straightforward design, sparse material requirements, low processing temperatures, and cheap manufacturing costs. A multi-chamber plasma-accelerated chemical vapor deposition apparatus driven by radio frequency was used to create the intrinsic and extrinsic layers of the a-Si: H solar cell. Multi-chamber allows us to upgrade each layer of the gadget utilizing a distinct space, preventing cross-contamination throughout the procedure. To enhance cell conversion efficiency, a thorough analysis has been conducted in this work to evaluate the manufacturing process and comprehend the link between process factors and property dependency. Our findings demonstrate an amorphous Si: H solar cell with a maximum cell efficiency of 6.52%, Voc 880 mV, Isc 11.33 mA/cm2, and FF 65%. We think that a modeling method followed by manufacturing can further enhance the performance of a-Si: H-based solar cell devices.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Prayogi, S., & Wibowo, W. K. (2024). Fabrication of hydrogenated amorphous silicon-based solar cells using RF-PECVD. International Journal of Applied Power Engineering (IJAPE), 14(1), 173. https://doi.org/10.11591/ijape.v14.i1.pp173-179

MLA 9

Prayogi, Soni, and Wahyu Kunto Wibowo. “Fabrication of hydrogenated amorphous silicon-based solar cells using RF-PECVD.” International Journal of Applied Power Engineering (IJAPE), vol. 14, no. 1, 2024, p. 173. https://doi.org/10.11591/ijape.v14.i1.pp173-179.

Chicago

Prayogi, Soni and Wahyu Kunto Wibowo. 2024. “Fabrication of hydrogenated amorphous silicon-based solar cells using RF-PECVD.” International Journal of Applied Power Engineering (IJAPE) 14 (1): 173. https://doi.org/10.11591/ijape.v14.i1.pp173-179.

Harvard

Prayogi, S. and Wibowo, W. K. (2024) ‘Fabrication of hydrogenated amorphous silicon-based solar cells using RF-PECVD’, International Journal of Applied Power Engineering (IJAPE), 14(1), p. 173. doi:10.11591/ijape.v14.i1.pp173-179.

IEEE

S. Prayogi and W. K. Wibowo, “Fabrication of hydrogenated amorphous silicon-based solar cells using RF-PECVD,” International Journal of Applied Power Engineering (IJAPE), vol. 14, no. 1, p. 173, 2024, doi: 10.11591/ijape.v14.i1.pp173-179.

BibTeX

@article{prayogi2024fabrication,
  title     = {{Fabrication of hydrogenated amorphous silicon-based solar cells using RF-PECVD}},
  author    = {Prayogi, Soni and Wibowo, Wahyu Kunto},
  journal   = {International Journal of Applied Power Engineering (IJAPE)},
  year      = {2024},
  volume    = {14},
  number    = {1},
  pages     = {173},
  doi       = {10.11591/ijape.v14.i1.pp173-179},
  url       = {https://doi.org/10.11591/ijape.v14.i1.pp173-179}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies

  • hydrogenated amorphous silicon
  • thin-film solar cells
  • RF-PECVD
  • conversion efficiency
  • process parameter optimization
  • solar cell modeling

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Prayogi, S., & Wibowo, W. K. (2024). Fabrication of hydrogenated amorphous silicon-based solar cells using RF-PECVD. International Journal of Applied Power Engineering (IJAPE), 14(1), 173. https://doi.org/10.11591/ijape.v14.i1.pp173-179

How many times has this paper been cited?

0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at International Journal of Applied Power Engineering (IJAPE).

Who wrote this paper?

Soni Prayogi, Wahyu Kunto Wibowo.

What is the DOI of this paper?

10.11591/ijape.v14.i1.pp173-179. The permanent link is https://doi.org/10.11591/ijape.v14.i1.pp173-179.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.