Journal article · 2001 · Open access

Fabrication and Wear Behavior of Mo5Si3 Particles Reinforced Si3N4 Composite.

Tateoki IIZUKA, Toshihiro Murao, Hiroyuki Yamamoto, Hideki Kita

Journal of the Ceramic Society of Japan, 109(1272), 699–703 · Published 1 January 2001 · DOI 10.2109/jcersj.109.1272_699

Open PDFView at the publisherCite this paper

In brief

“Fabrication and Wear Behavior of Mo5Si3 Particles Reinforced Si3N4 Composite.” is a 2001 journal article by Tateoki IIZUKA and 3 co-authors, published in Journal of the Ceramic Society of Japan. OpenAlex counts 25 citations as of 20 November 2026. It is open access: the full text is free to read at Journal of the Ceramic Society of Japan.

Citations
25
Field-weighted impact
8.80
References
16
Authors
4

Abstract

Mo5Si3 reinforced silicon nitride composite was fabricated by sintering a Mo-solution infiltrated porous silicon nitride at 1850°C in N2 atmosphere; silicon nitride containing solid lubricant particles of MoO3 at the surface layer was developed by oxidizing a Mo5Si3-Si3N4 composite at 700°C in air. The mechanical properties and the tribology behavior of Mo5Si3-Si3N4 composite were evaluated. It was found that the Mo5Si3 dispersed at grain boundary of silicon nitride, the average diameters of Mo5Si3 particles being in the range 0.2 to 0.6μm. The flexural strength of the Mo5Si3-Si3N4 composite was 881MPa, which was higher than that of unreinforced silicon nitride by about 20%, because of the Mo5Si3 sub-micron particles reinforced the grain boundaries of silicon nitride. The friction coefficient of silicon nitride depended on the stress conditions and the shape of the pin. When increasing the spherical radius of the pin from 5 to 18mm, the friction coefficient of the Mo5Si3-Si3N4 composite decreased and the wear mechanism shifted from adhesive-abrasive wear to a complex type of adhesive-abrasive and abrasive wear mechanism. The formation of MoO3 on the surface layer of Mo5Si3-Si3N4 after oxidation treatment lowered the friction coefficient, the friction coefficient of oxidized Mo5Si3-Si3N4 composite being 0.46 in the dry friction condition. Due to the self-lubricant effect of MoO3, the friction coefficient of oxidized Mo5Si3-Si3N4 composite was lower than that of conventional silicon nitride by about 25%.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

IIZUKA, T., Murao, T., Yamamoto, H., & Kita, H. (2001). Fabrication and Wear Behavior of Mo5Si3 Particles Reinforced Si3N4 Composite. Journal of the Ceramic Society of Japan, 109(1272), 699–703. https://doi.org/10.2109/jcersj.109.1272_699

MLA 9

IIZUKA, Tateoki, et al. “Fabrication and Wear Behavior of Mo5Si3 Particles Reinforced Si3N4 Composite.” Journal of the Ceramic Society of Japan, vol. 109, no. 1272, 2001, pp. 699–703. https://doi.org/10.2109/jcersj.109.1272_699.

Chicago

IIZUKA, Tateoki, Toshihiro Murao, Hiroyuki Yamamoto, and Hideki Kita. 2001. “Fabrication and Wear Behavior of Mo5Si3 Particles Reinforced Si3N4 Composite.” Journal of the Ceramic Society of Japan 109 (1272): 699–703. https://doi.org/10.2109/jcersj.109.1272_699.

Harvard

IIZUKA, T. et al. (2001) ‘Fabrication and Wear Behavior of Mo5Si3 Particles Reinforced Si3N4 Composite.’, Journal of the Ceramic Society of Japan, 109(1272), pp. 699–703. doi:10.2109/jcersj.109.1272_699.

IEEE

T. IIZUKA, T. Murao, H. Yamamoto, and H. Kita, “Fabrication and Wear Behavior of Mo5Si3 Particles Reinforced Si3N4 Composite.,” Journal of the Ceramic Society of Japan, vol. 109, no. 1272, pp. 699–703, 2001, doi: 10.2109/jcersj.109.1272_699.

BibTeX

@article{iizuka2001fabrication,
  title     = {{Fabrication and Wear Behavior of Mo5Si3 Particles Reinforced Si3N4 Composite.}},
  author    = {IIZUKA, Tateoki and Murao, Toshihiro and Yamamoto, Hiroyuki and Kita, Hideki},
  journal   = {Journal of the Ceramic Society of Japan},
  year      = {2001},
  volume    = {109},
  number    = {1272},
  pages     = {699--703},
  doi       = {10.2109/jcersj.109.1272_699},
  url       = {https://doi.org/10.2109/jcersj.109.1272_699}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Ceramics and Composites › Advanced ceramic materials synthesis

  • solid lubricants
  • oxidation treatment
  • self-lubrication
  • friction coefficient
  • wear mechanisms
  • flexural strength
  • grain boundary strengthening
  • Coulomb friction

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

IIZUKA, T., Murao, T., Yamamoto, H., & Kita, H. (2001). Fabrication and Wear Behavior of Mo5Si3 Particles Reinforced Si3N4 Composite. Journal of the Ceramic Society of Japan, 109(1272), 699–703. https://doi.org/10.2109/jcersj.109.1272_699

How many times has this paper been cited?

25 times, according to OpenAlex on 20 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of the Ceramic Society of Japan: sign in and open the PDF from this page.

Who wrote this paper?

Tateoki IIZUKA, Toshihiro Murao, Hiroyuki Yamamoto, Hideki Kita.

What is the DOI of this paper?

10.2109/jcersj.109.1272_699, permanently at https://doi.org/10.2109/jcersj.109.1272_699. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 20 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.