Journal article · 2024 · Open access
Fabrication and Tribological Properties of Diamond-like Carbon Film with Cr Doping by High-Power Impulse Magnetron Sputtering
Coatings, 14(7), 916 · Published 22 July 2024 · DOI 10.3390/coatings14070916
In brief
“Fabrication and Tribological Properties of Diamond-like Carbon Film with Cr Doping by High-Power Impulse Magnetron Sputtering” is a 2024 journal article by Shuai Liu and 8 co-authors, published in Coatings. OpenAlex counts 7 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Coatings.
- Citations
- 7
- Most cited in
- 2025 (4)
- Field-weighted impact
- 0.91
- References
- 37
- Authors
- 9
Abstract
The present study aims to investigate the advantages of diamond-like carbon (DLC) films in reducing friction and lubrication to address issues such as the low surface hardness, high friction coefficients, and poor wear resistance of titanium alloys. Cr-doped DLC films were deposited by high-power impulse magnetron sputtering (HiPIMS) in an atmosphere of a gas mixture of Ar and C2H2. The energy of the deposited particles was controlled by adjusting the target powers, and four sets of film samples with different powers (4 kW, 8 kW, 12 kW, and 16 kW) were fabricated. The results showed that with an increase in target power, the Cr content increased from 3.73 at. % to 22.65 at. %; meanwhile, the microstructure of the film evolved from an amorphous feature to a nanocomposite structure, with carbide embedded in an amorphous carbon matrix. The sp2-C bond content was also increased in films, suggesting an intensification of the film’s graphitization. The hardness of films exhibited a trend of initially increasing and then decreasing, reaching the maximum value at 12 kW. The friction coefficient and wear rate of films showed a reverse trend compared to hardness variation, namely initially decreasing and then increasing. The friction coefficient reached a minimum value of 0.14, and the wear rate was 2.50 × 10−7 (mm3)/(N·m), at 8 kW. The abrasive wear was the primary wear mechanism for films deposited at a higher target power. Therefore, by adjusting the target power parameter, it is possible to control the content of the metal and sp2/sp3 bonds in metal-doped DLC films, thereby regulating the mechanical and tribological properties of the films and providing an effective approach for addressing surface issues in titanium alloys.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Liu, S., Zhuang, W., Ding, J. C., Liu, Y., Yu, W., Yang, Y., Liu, X., Yuan, J., & Zheng, J. (2024). Fabrication and Tribological Properties of Diamond-like Carbon Film with Cr Doping by High-Power Impulse Magnetron Sputtering. Coatings, 14(7), 916. https://doi.org/10.3390/coatings14070916
MLA 9
Liu, Shuai, et al. “Fabrication and Tribological Properties of Diamond-like Carbon Film with Cr Doping by High-Power Impulse Magnetron Sputtering.” Coatings, vol. 14, no. 7, 2024, p. 916. https://doi.org/10.3390/coatings14070916.
Chicago
Liu, Shuai, Wenjian Zhuang, Ji Cheng Ding, Yuan Liu, Weibo Yu, Ying Yang, Xingguang Liu, Jing Yuan, and Jun Zheng. 2024. “Fabrication and Tribological Properties of Diamond-like Carbon Film with Cr Doping by High-Power Impulse Magnetron Sputtering.” Coatings 14 (7): 916. https://doi.org/10.3390/coatings14070916.
Harvard
Liu, S. et al. (2024) ‘Fabrication and Tribological Properties of Diamond-like Carbon Film with Cr Doping by High-Power Impulse Magnetron Sputtering’, Coatings, 14(7), p. 916. doi:10.3390/coatings14070916.
IEEE
S. Liu et al., “Fabrication and Tribological Properties of Diamond-like Carbon Film with Cr Doping by High-Power Impulse Magnetron Sputtering,” Coatings, vol. 14, no. 7, p. 916, 2024, doi: 10.3390/coatings14070916.
BibTeX
@article{liu2024fabrication,
title = {{Fabrication and Tribological Properties of Diamond-like Carbon Film with Cr Doping by High-Power Impulse Magnetron Sputtering}},
author = {Liu, Shuai and Zhuang, Wenjian and Ding, Ji Cheng and Liu, Yuan and Yu, Weibo and Yang, Ying and Liu, Xingguang and Yuan, Jing and Zheng, Jun},
journal = {Coatings},
year = {2024},
volume = {14},
number = {7},
pages = {916},
doi = {10.3390/coatings14070916},
url = {https://doi.org/10.3390/coatings14070916}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 1 | |
| 2025 | 4 | |
| 2026 | 2 |
Its field-weighted citation impact is 0.91: it has been cited 0.91 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- diamond-like carbon films
- chromium doping
- high power impulse magnetron sputtering
- target power
- friction coefficient
- wear rate
- hardness
- graphitization
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Liu, S., Zhuang, W., Ding, J. C., Liu, Y., Yu, W., Yang, Y., Liu, X., Yuan, J., & Zheng, J. (2024). Fabrication and Tribological Properties of Diamond-like Carbon Film with Cr Doping by High-Power Impulse Magnetron Sputtering. Coatings, 14(7), 916. https://doi.org/10.3390/coatings14070916
How many times has this paper been cited?
7 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Coatings.
Who wrote this paper?
Shuai Liu, Wenjian Zhuang, Ji Cheng Ding, Yuan Liu, Weibo Yu, Ying Yang, Xingguang Liu, Jing Yuan, Jun Zheng.
What is the DOI of this paper?
10.3390/coatings14070916. The permanent link is https://doi.org/10.3390/coatings14070916.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.