Conference paper · 2002
Fabrication and properties of the flexible a-Si:H solar cells on plastic films using roll-to-roll method
World Conference on Photovoltaic Energy Conversion, 1, 682–685 · Published 17 December 2002 · DOI 10.1109/wcpec.1994.520053
In brief
“Fabrication and properties of the flexible a-Si:H solar cells on plastic films using roll-to-roll method” is a 2002 conference paper by H. Shinohara and 3 co-authors, published in World Conference on Photovoltaic Energy Conversion. OpenAlex counts 6 citations as of 16 November 2026. The publisher's version is not open access, and OpenAlex records no free legal copy.
- Citations
- 6
- Field-weighted impact
- 0.75
- References
- 4
- Authors
- 4
Abstract
Flexible a-Si:H solar cells were fabricated on plastic films using the roll-to-roll method. The films used in this study were 0.075 mm thick and 230 mm wide. These solar cells were fabricated in a sequential process. We studied the distribution of characteristics in the longitudinal direction of the film. A conversion efficiency of 8.02% was… Read the full abstract at the publisher.
Excerpt. This paper is not open access.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Shinohara, H., Abe, M., Nishi, K., & Arai, Y. (2002). Fabrication and properties of the flexible a-Si:H solar cells on plastic films using roll-to-roll method. World Conference on Photovoltaic Energy Conversion, 1, 682–685. https://doi.org/10.1109/wcpec.1994.520053
MLA 9
Shinohara, H., et al. “Fabrication and properties of the flexible a-Si:H solar cells on plastic films using roll-to-roll method.” World Conference on Photovoltaic Energy Conversion, vol. 1, 2002, pp. 682–685. https://doi.org/10.1109/wcpec.1994.520053.
Chicago
Shinohara, H., M. Abe, K. Nishi, and Yasuyuki Arai. 2002. “Fabrication and properties of the flexible a-Si:H solar cells on plastic films using roll-to-roll method.” World Conference on Photovoltaic Energy Conversion 1: 682–685. https://doi.org/10.1109/wcpec.1994.520053.
Harvard
Shinohara, H. et al. (2002) ‘Fabrication and properties of the flexible a-Si:H solar cells on plastic films using roll-to-roll method’, World Conference on Photovoltaic Energy Conversion, 1, pp. 682–685. doi:10.1109/wcpec.1994.520053.
IEEE
H. Shinohara, M. Abe, K. Nishi, and Y. Arai, “Fabrication and properties of the flexible a-Si:H solar cells on plastic films using roll-to-roll method,” World Conference on Photovoltaic Energy Conversion, vol. 1, pp. 682–685, 2002, doi: 10.1109/wcpec.1994.520053.
BibTeX
@inproceedings{shinohara2002fabrication,
title = {{Fabrication and properties of the flexible a-Si:H solar cells on plastic films using roll-to-roll method}},
author = {Shinohara, H. and Abe, M. and Nishi, K. and Arai, Yasuyuki},
booktitle = {World Conference on Photovoltaic Energy Conversion},
year = {2002},
volume = {1},
pages = {682--685},
doi = {10.1109/wcpec.1994.520053},
url = {https://doi.org/10.1109/wcpec.1994.520053}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies
- flexible solar cells
- hydrogenated amorphous silicon
- plastic substrates
- roll-to-roll processing
- conversion efficiency
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Shinohara, H., Abe, M., Nishi, K., & Arai, Y. (2002). Fabrication and properties of the flexible a-Si:H solar cells on plastic films using roll-to-roll method. World Conference on Photovoltaic Energy Conversion, 1, 682–685. https://doi.org/10.1109/wcpec.1994.520053
How many times has this paper been cited?
6 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
OpenAlex records no free legal copy. Check your library's access, the authors' pages or a repository, or ask the corresponding author for a copy.
Who wrote this paper?
H. Shinohara, M. Abe, K. Nishi, Yasuyuki Arai.
What is the DOI of this paper?
10.1109/wcpec.1994.520053. The permanent link is https://doi.org/10.1109/wcpec.1994.520053.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.