Journal article · 2016 · Open access

Fabrication and modeling of shape memory alloy springs

B Heidari, Mahmoud Kadkhodaei, Mahmoud Barati, F. Karimzadeh

Smart Materials and Structures, 25(12), 125003 · Published 10 November 2016 · DOI 10.1088/0964-1726/25/12/125003

Open PDFView at the publisherCite this paper

In brief

“Fabrication and modeling of shape memory alloy springs” is a 2016 journal article by B Heidari and 3 co-authors, published in Smart Materials and Structures. OpenAlex counts 32 citations as of 22 November 2026. It is open access: the full text is free to read at Smart Materials and Structures.

Citations
32
Most cited in
2019 (8)
Field-weighted impact
0.95
References
22
Authors
4

Abstract

In this paper, shape memory alloy (SMA) helical springs are produced by shape setting two sets of NiTi (Ti-55.87 at% Ni) wires, one of which showing shape memory effect and another one showing pseudoelasticity at the ambient temperature. Different pitches as well as annealing temperatures are tried to investigate the effect of such parameters on the thermomechanical characteristics of the fabricated springs. Phase transformation temperatures of the products are measured by differential scanning calorimetry and are compared with those of the original wires. Compression tests are also carried out, and stiffness of each spring is determined. The desired pitches are so that a group of springs experiences phase transition during loading while the other does not. The former shows a varying stiffness upon the application of compression, but the latter acts as passive springs with a predetermined stiffness. Based on the von-Mises effective stress and strain, an enhanced one-dimensional constitutive model is further proposed to describe the shear stress–strain response within the coils of an SMA spring. The theoretically predicted force–displacement responses of the produced springs are shown to be in a reasonable agreement with the experimental results. Finally, effects of variations in geometric parameters on the axial force–displacement response of an SMA spring are investigated.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Heidari, B., Kadkhodaei, M., Barati, M., & Karimzadeh, F. (2016). Fabrication and modeling of shape memory alloy springs. Smart Materials and Structures, 25(12), 125003. https://doi.org/10.1088/0964-1726/25/12/125003

MLA 9

Heidari, B, et al. “Fabrication and modeling of shape memory alloy springs.” Smart Materials and Structures, vol. 25, no. 12, 2016, p. 125003. https://doi.org/10.1088/0964-1726/25/12/125003.

Chicago

Heidari, B, Mahmoud Kadkhodaei, Mahmoud Barati, and F. Karimzadeh. 2016. “Fabrication and modeling of shape memory alloy springs.” Smart Materials and Structures 25 (12): 125003. https://doi.org/10.1088/0964-1726/25/12/125003.

Harvard

Heidari, B. et al. (2016) ‘Fabrication and modeling of shape memory alloy springs’, Smart Materials and Structures, 25(12), p. 125003. doi:10.1088/0964-1726/25/12/125003.

IEEE

B. Heidari, M. Kadkhodaei, M. Barati, and F. Karimzadeh, “Fabrication and modeling of shape memory alloy springs,” Smart Materials and Structures, vol. 25, no. 12, p. 125003, 2016, doi: 10.1088/0964-1726/25/12/125003.

BibTeX

@article{heidari2016fabrication,
  title     = {{Fabrication and modeling of shape memory alloy springs}},
  author    = {Heidari, B and Kadkhodaei, Mahmoud and Barati, Mahmoud and Karimzadeh, F.},
  journal   = {Smart Materials and Structures},
  year      = {2016},
  volume    = {25},
  number    = {12},
  pages     = {125003},
  doi       = {10.1088/0964-1726/25/12/125003},
  url       = {https://doi.org/10.1088/0964-1726/25/12/125003}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201811
201988
202044
202144
202211
202322
202444
202544
202644

Its field-weighted citation impact is 0.95: it has been cited 0.95 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • shape memory alloy springs
  • NiTi wire
  • helical springs
  • superelasticity
  • transformation temperature
  • annealing temperature
  • variable stiffness
  • constitutive modeling

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Heidari, B., Kadkhodaei, M., Barati, M., & Karimzadeh, F. (2016). Fabrication and modeling of shape memory alloy springs. Smart Materials and Structures, 25(12), 125003. https://doi.org/10.1088/0964-1726/25/12/125003

How many times has this paper been cited?

32 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Smart Materials and Structures: sign in and open the PDF from this page.

Who wrote this paper?

B Heidari, Mahmoud Kadkhodaei, Mahmoud Barati, F. Karimzadeh.

What is the DOI of this paper?

10.1088/0964-1726/25/12/125003, permanently at https://doi.org/10.1088/0964-1726/25/12/125003. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.