Dissertation · 2016 · Open access

Fabrication and Analysis of Magnet Based Soft Tactile Sensor and Its Application to Robotic Manipulation and Texture Classification

Katudampe Vithanage, Damith Suresh Chathuranga

Institutional Repositories DataBase (IRDB), 1 · Published 25 September 2016 · DOI 10.34382/00010675

Open PDFView at the publisherCite this paper

In brief

“Fabrication and Analysis of Magnet Based Soft Tactile Sensor and Its Application to Robotic Manipulation and Texture Classification” is a 2016 dissertation by Katudampe Vithanage and Damith Suresh Chathuranga, published in Institutional Repositories DataBase (IRDB). OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at Institutional Repositories DataBase (IRDB).

Citations
0
References
96
Authors
2

Abstract

This thesis presents the design and development of a novel soft 3 axis force sensor.It was developed to be used in soft tactile fingertips.Additionally, we present applications of the sensor in texture classification and object manipulation.The sensor was constructed after identifying the design requirements of the tactile system needed for a robot to perform both dexterous object manipulations and environment perception.The human tactile system was taken as the basis for the analysis.Finite Element (FE) models of biological fingers, experimental artificial fingertips and information obtained from previous literature were used to identify the requirements.The analysis pointed out that the force and vibration modalities were vital for tactile sensing while the placement of the sensors between the soft layers, the sensitivity of the sensors, and the sensor density were important factors to be considered.Literature survey about tactile fingertips pointed to a void in tactile sensors that sufficiently satisfied all the above requirements.Thus, a novel soft three axis force sensor was developed.The sensor had a cylindrical cantilever beam made of silicone rubber that compressed and bent when normal and tangential forces were applied.The displacement of the beam's end was calculated by measuring the change of the magnetic field emitted by a permanent magnet embedded in the soft beam at fixed points in space.Spring theory and bending theory were used to calculate the normal and tangential force components.The sensor was capable of measuring forces as well as detecting vibrations in the frequency range of 1 -500Hz.It could be fixed under the soft layers of the fingertip without wires obstructing the measurements.The design, development and characterization of the sensor were reported.I take this opportunity to thank my mentors, family and friends, who helped and supported me through this long yet productive journey of graduate studies.First, I would like to thank my supervisors Prof Shinichi Hirai who helped me at every step of the way.The depth of his knowledge, patients, supportiveness and companionate nature encouraged, and motivated me to pursue my dreams.Conducting research under his tutelage was an honor and I have no wards to thank him.I am much grateful for him when he helped me in my financial difficulties.I will be eternally indebt for his kindness.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Vithanage, K., & Chathuranga, D. S. (2016). Fabrication and Analysis of Magnet Based Soft Tactile Sensor and Its Application to Robotic Manipulation and Texture Classification. Institutional Repositories DataBase (IRDB), 1. https://doi.org/10.34382/00010675

MLA 9

Vithanage, Katudampe, and Damith Suresh Chathuranga. “Fabrication and Analysis of Magnet Based Soft Tactile Sensor and Its Application to Robotic Manipulation and Texture Classification.” Institutional Repositories DataBase (IRDB), 2016, p. 1. https://doi.org/10.34382/00010675.

Chicago

Vithanage, Katudampe and Damith Suresh Chathuranga. 2016. “Fabrication and Analysis of Magnet Based Soft Tactile Sensor and Its Application to Robotic Manipulation and Texture Classification.” Institutional Repositories DataBase (IRDB): 1. https://doi.org/10.34382/00010675.

Harvard

Vithanage, K. and Chathuranga, D. S. (2016) ‘Fabrication and Analysis of Magnet Based Soft Tactile Sensor and Its Application to Robotic Manipulation and Texture Classification’, Institutional Repositories DataBase (IRDB), p. 1. doi:10.34382/00010675.

IEEE

K. Vithanage and D. S. Chathuranga, “Fabrication and Analysis of Magnet Based Soft Tactile Sensor and Its Application to Robotic Manipulation and Texture Classification,” Institutional Repositories DataBase (IRDB), p. 1, 2016, doi: 10.34382/00010675.

BibTeX

@phdthesis{vithanage2016fabrication,
  title     = {{Fabrication and Analysis of Magnet Based Soft Tactile Sensor and Its Application to Robotic Manipulation and Texture Classification}},
  author    = {Vithanage, Katudampe and Chathuranga, Damith Suresh},
  year      = {2016},
  pages     = {1},
  doi       = {10.34382/00010675},
  url       = {https://doi.org/10.34382/00010675}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft tactile sensors
  • three-axis force sensor
  • cantilever beam
  • silicone rubber
  • vibration sensing
  • texture classification
  • robotic manipulation

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Vithanage, K., & Chathuranga, D. S. (2016). Fabrication and Analysis of Magnet Based Soft Tactile Sensor and Its Application to Robotic Manipulation and Texture Classification. Institutional Repositories DataBase (IRDB), 1. https://doi.org/10.34382/00010675

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Institutional Repositories DataBase (IRDB): sign in and open the PDF from this page.

Who wrote this paper?

Katudampe Vithanage, Damith Suresh Chathuranga.

What is the DOI of this paper?

10.34382/00010675, permanently at https://doi.org/10.34382/00010675. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.