Journal article · 2024 · Open access
Exploring tribological characteristics of ZrN-MoSN composite films fabricated via RF magnetron sputtering: Insights from microstructure and performance analysis
Surface and Coatings Technology, 484, 130813 · Published 19 April 2024 · DOI 10.1016/j.surfcoat.2024.130813
In brief
“Exploring tribological characteristics of ZrN-MoSN composite films fabricated via RF magnetron sputtering: Insights from microstructure and performance analysis” is a 2024 journal article by Jing Luan and 8 co-authors, published in Surface and Coatings Technology. OpenAlex counts 14 citations as of 17 November 2026, which puts it in the top 7% of works published in 2024 by citations. It is open access under a CC BY-NC licence: the full text is free to read at Surface and Coatings Technology.
- Citations
- 14
- Most cited in
- 2025 (7)
- Field-weighted impact
- 1.81
- References
- 64
- Authors
- 9
Abstract
Achieving the stringent demands of sustainable tribological industrial applications poses a significant challenge, particular in optimizing the self-lubricant performance of nitride-based films. This paper tackled this challenge by designing and depositing a series of ZrN-MoSN composite films with varying (Mo + S)/Zr ratios, employing RF magnetron sputtering, aimed to enhance the tribological properties through utilizing the high loading capacity of the ZrN matrix and the exceptional self-lubricating attributes of Mo-S-N additives. After conducting thorough investigations on the microstructure, and tribological properties, the results revealed that the dense columnar structured ZrN-MoSN composite films displayed a polycrystalline composition comprising fcc-ZrN and hcp-MoS2 phases, intertwined with amorphous phases of Mo(SN)x and MoS2(N2). (Mo + S)/Zr ratios below 1.08 exhibited a minor impact on the room temperature (RT) tribological properties, while higher ratios led to degradation on RT average friction coefficient (COF) and wear rate (WR). However, the synergistic effect of ZrN matrix and the tribo-phases of layered MoO3 and hard ZrO2 contributed to the significant enhanced 500 °C tribological properties, particularly with an optimized (Mo + S)/Zr ratio of 0.43.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Luan, J., Lu, H., Xu, J., Fernandes, F., Evaristo, M., Ma, B., Xie, F., Cavaleiro, A., & Ju, H. (2024). Exploring tribological characteristics of ZrN-MoSN composite films fabricated via RF magnetron sputtering: Insights from microstructure and performance analysis. Surface and Coatings Technology, 484, 130813. https://doi.org/10.1016/j.surfcoat.2024.130813
MLA 9
Luan, Jing, et al. “Exploring tribological characteristics of ZrN-MoSN composite films fabricated via RF magnetron sputtering: Insights from microstructure and performance analysis.” Surface and Coatings Technology, vol. 484, 2024, p. 130813. https://doi.org/10.1016/j.surfcoat.2024.130813.
Chicago
Luan, Jing, Hongying Lu, Junhua Xu, Filipe Fernandes, Manuel Evaristo, Bingyang Ma, Fuxiang Xie, A. Cavaleiro, and Hongbo Ju. 2024. “Exploring tribological characteristics of ZrN-MoSN composite films fabricated via RF magnetron sputtering: Insights from microstructure and performance analysis.” Surface and Coatings Technology 484: 130813. https://doi.org/10.1016/j.surfcoat.2024.130813.
Harvard
Luan, J. et al. (2024) ‘Exploring tribological characteristics of ZrN-MoSN composite films fabricated via RF magnetron sputtering: Insights from microstructure and performance analysis’, Surface and Coatings Technology, 484, p. 130813. doi:10.1016/j.surfcoat.2024.130813.
IEEE
J. Luan et al., “Exploring tribological characteristics of ZrN-MoSN composite films fabricated via RF magnetron sputtering: Insights from microstructure and performance analysis,” Surface and Coatings Technology, vol. 484, p. 130813, 2024, doi: 10.1016/j.surfcoat.2024.130813.
BibTeX
@article{luan2024exploring,
title = {{Exploring tribological characteristics of ZrN-MoSN composite films fabricated via RF magnetron sputtering: Insights from microstructure and performance analysis}},
author = {Luan, Jing and Lu, Hongying and Xu, Junhua and Fernandes, Filipe and Evaristo, Manuel and Ma, Bingyang and Xie, Fuxiang and Cavaleiro, A. and Ju, Hongbo},
journal = {Surface and Coatings Technology},
year = {2024},
volume = {484},
pages = {130813},
doi = {10.1016/j.surfcoat.2024.130813},
url = {https://doi.org/10.1016/j.surfcoat.2024.130813}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 2 | |
| 2025 | 7 | |
| 2026 | 5 |
Its field-weighted citation impact is 1.81: it has been cited 1.81 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- self-lubricating coatings
- tribological properties
- friction coefficient
- wear rate
- MoS2
- molybdenum trioxide
- zirconia
- columnar microstructure
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Luan, J., Lu, H., Xu, J., Fernandes, F., Evaristo, M., Ma, B., Xie, F., Cavaleiro, A., & Ju, H. (2024). Exploring tribological characteristics of ZrN-MoSN composite films fabricated via RF magnetron sputtering: Insights from microstructure and performance analysis. Surface and Coatings Technology, 484, 130813. https://doi.org/10.1016/j.surfcoat.2024.130813
How many times has this paper been cited?
14 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Surface and Coatings Technology: sign in and open the PDF from this page.
Who wrote this paper?
Jing Luan, Hongying Lu, Junhua Xu, Filipe Fernandes, Manuel Evaristo, Bingyang Ma, Fuxiang Xie, A. Cavaleiro, Hongbo Ju.
What is the DOI of this paper?
10.1016/j.surfcoat.2024.130813, permanently at https://doi.org/10.1016/j.surfcoat.2024.130813. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.