Journal article · 2019 · Open access

Experimental Study of Wear Mechanisms of Cemented Carbide in the Turning of Ti6Al4V

Sara Saketi, Stina Odelros, Jonas Östby, Mikael Olsson

Materials, 12(17), 2822 · Published 2 September 2019 · DOI 10.3390/ma12172822

Open PDFView at the publisherCite this paper

In brief

“Experimental Study of Wear Mechanisms of Cemented Carbide in the Turning of Ti6Al4V” is a 2019 journal article by Sara Saketi and 3 co-authors, published in Materials. OpenAlex counts 45 citations as of 17 November 2026, which puts it in the top 5% of works published in 2019 by citations. It is open access under a CC BY licence: the full text is free to read at Materials.

Citations
45
Most cited in
2025 (10)
Field-weighted impact
2.40
References
36
Authors
4

Abstract

Titanium and titanium alloys such as Ti-6Al-4V are generally considered as difficult-to-machine materials. This is mainly due to their high chemical reactivity, poor thermal conductivity, and high strength, which is maintained at elevated temperatures. As a result, the cutting tool is exposed to rather extreme contact conditions resulting in plastic deformation and wear. In the present work, the mechanisms behind the crater and flank wear of uncoated cemented carbide inserts in the turning of Ti6Al4V are characterized using high-resolution scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and high-resolution Auger electron spectroscopy (AES).The results show that, for combinations of low cutting speeds and feeds, crater and flank wear were found to be controlled by an attrition wear mechanism, while for combinations of medium to high cutting speeds and feeds, a diffusion wear mechanism was found to control the wear. For the latter combinations, high-resolution SEM and AES analysis reveal the formation of an approximately 100 nm thick carbon-depleted tungsten carbide (WC)-layer at the cemented carbide/Ti6Al4V interface due to the diffusion of carbon into the adhered build-up layers of work material on the rake and flank surfaces.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Saketi, S., Odelros, S., Östby, J., & Olsson, M. (2019). Experimental Study of Wear Mechanisms of Cemented Carbide in the Turning of Ti6Al4V. Materials, 12(17), 2822. https://doi.org/10.3390/ma12172822

MLA 9

Saketi, Sara, et al. “Experimental Study of Wear Mechanisms of Cemented Carbide in the Turning of Ti6Al4V.” Materials, vol. 12, no. 17, 2019, p. 2822. https://doi.org/10.3390/ma12172822.

Chicago

Saketi, Sara, Stina Odelros, Jonas Östby, and Mikael Olsson. 2019. “Experimental Study of Wear Mechanisms of Cemented Carbide in the Turning of Ti6Al4V.” Materials 12 (17): 2822. https://doi.org/10.3390/ma12172822.

Harvard

Saketi, S. et al. (2019) ‘Experimental Study of Wear Mechanisms of Cemented Carbide in the Turning of Ti6Al4V’, Materials, 12(17), p. 2822. doi:10.3390/ma12172822.

IEEE

S. Saketi, S. Odelros, J. Östby, and M. Olsson, “Experimental Study of Wear Mechanisms of Cemented Carbide in the Turning of Ti6Al4V,” Materials, vol. 12, no. 17, p. 2822, 2019, doi: 10.3390/ma12172822.

BibTeX

@article{saketi2019experimental,
  title     = {{Experimental Study of Wear Mechanisms of Cemented Carbide in the Turning of Ti6Al4V}},
  author    = {Saketi, Sara and Odelros, Stina and Östby, Jonas and Olsson, Mikael},
  journal   = {Materials},
  year      = {2019},
  volume    = {12},
  number    = {17},
  pages     = {2822},
  doi       = {10.3390/ma12172822},
  url       = {https://doi.org/10.3390/ma12172822}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201933
202044
202155
202255
202366
202444
20251010
202688

Its field-weighted citation impact is 2.40: it has been cited 2.40 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • cemented carbides
  • Ti-6Al-4V
  • titanium alloys
  • turning
  • wear mechanisms
  • crater wear
  • flank wear
  • attrition wear

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Saketi, S., Odelros, S., Östby, J., & Olsson, M. (2019). Experimental Study of Wear Mechanisms of Cemented Carbide in the Turning of Ti6Al4V. Materials, 12(17), 2822. https://doi.org/10.3390/ma12172822

How many times has this paper been cited?

45 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Materials: sign in and open the PDF from this page.

Who wrote this paper?

Sara Saketi, Stina Odelros, Jonas Östby, Mikael Olsson.

What is the DOI of this paper?

10.3390/ma12172822, permanently at https://doi.org/10.3390/ma12172822. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.