Journal article · 2019 · Open access

Experimental investigation of the microstructures and tensile properties of polyacrylonitrile-based carbon fibers exposed to elevated temperatures in air

Chenggao Li, Guijun Xian

Journal of Engineered Fibers and Fabrics, 14 · Published 1 January 2019 · DOI 10.1177/1558925019850010

Open full textCite this paper

In brief

“Experimental investigation of the microstructures and tensile properties of polyacrylonitrile-based carbon fibers exposed to elevated temperatures in air” is a 2019 journal article by Chenggao Li and Guijun Xian, published in Journal of Engineered Fibers and Fabrics. OpenAlex counts 28 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Journal of Engineered Fibers and Fabrics.

Citations
28
Most cited in
2023 (6)
Field-weighted impact
1.20
References
31
Authors
2

Abstract

The elevated temperature resistance and even fire resistance of carbon fiber-reinforced polymer composites were critical concerns in many applications. These properties of a carbon fiber-reinforced polymer depend not only on the degradation of the polymer matrix but also on that of the carbon fibers under elevated temperatures. In this study, influences of elevated temperatures (by 700°C for 30 min) in air on the mechanical properties and microstructures of a carbon fiber were investigated experimentally. It was found that the tensile strength and modulus as well as the diameters of the carbon fibers were reduced remarkably when the treatment temperatures exceeded 500°C. At the same time, the content of the structurally ordered carbonaceous components on the surface of carbon fibers and the graphite microcrystal size were reduced, while the graphite interlayer spacing ( d 002 ) was enhanced. The deteriorated tensile modulus was attributed to the reduced graphite microcrystal size and the reduced thickness of the skin layer of the carbon fiber, while the degraded tensile strength was mainly attributed to the weakened cross-linking between the graphite planes.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Li, C., & Xian, G. (2019). Experimental investigation of the microstructures and tensile properties of polyacrylonitrile-based carbon fibers exposed to elevated temperatures in air. Journal of Engineered Fibers and Fabrics, 14. https://doi.org/10.1177/1558925019850010

MLA 9

Li, Chenggao, and Guijun Xian. “Experimental investigation of the microstructures and tensile properties of polyacrylonitrile-based carbon fibers exposed to elevated temperatures in air.” Journal of Engineered Fibers and Fabrics, vol. 14, 2019. https://doi.org/10.1177/1558925019850010.

Chicago

Li, Chenggao and Guijun Xian. 2019. “Experimental investigation of the microstructures and tensile properties of polyacrylonitrile-based carbon fibers exposed to elevated temperatures in air.” Journal of Engineered Fibers and Fabrics 14. https://doi.org/10.1177/1558925019850010.

Harvard

Li, C. and Xian, G. (2019) ‘Experimental investigation of the microstructures and tensile properties of polyacrylonitrile-based carbon fibers exposed to elevated temperatures in air’, Journal of Engineered Fibers and Fabrics, 14. doi:10.1177/1558925019850010.

IEEE

C. Li and G. Xian, “Experimental investigation of the microstructures and tensile properties of polyacrylonitrile-based carbon fibers exposed to elevated temperatures in air,” Journal of Engineered Fibers and Fabrics, vol. 14, 2019, doi: 10.1177/1558925019850010.

BibTeX

@article{li2019experimental,
  title     = {{Experimental investigation of the microstructures and tensile properties of polyacrylonitrile-based carbon fibers exposed to elevated temperatures in air}},
  author    = {Li, Chenggao and Xian, Guijun},
  journal   = {Journal of Engineered Fibers and Fabrics},
  year      = {2019},
  volume    = {14},
  doi       = {10.1177/1558925019850010},
  url       = {https://doi.org/10.1177/1558925019850010}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201911
202011
202133
202244
202366
202444
202566
202633

Its field-weighted citation impact is 1.20: it has been cited 1.20 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Fiber-reinforced polymer composites

  • polyacrylonitrile-based carbon fibers
  • high-temperature exposure
  • tensile properties
  • fiber microstructure
  • graphite interlayer spacing
  • skin layer thickness
  • fire resistance
  • carbon fiber reinforced polymer

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Li, C., & Xian, G. (2019). Experimental investigation of the microstructures and tensile properties of polyacrylonitrile-based carbon fibers exposed to elevated temperatures in air. Journal of Engineered Fibers and Fabrics, 14. https://doi.org/10.1177/1558925019850010

How many times has this paper been cited?

28 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of Engineered Fibers and Fabrics: sign in and open the full text from this page.

Who wrote this paper?

Chenggao Li, Guijun Xian.

What is the DOI of this paper?

10.1177/1558925019850010, permanently at https://doi.org/10.1177/1558925019850010. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.