Journal article · 2020 · Open access
Experimental Frequency Tuning Methodology of a Cantilever Piezoelectric Harvester Validated in a Multimodal Transportation
Electronics, 9(1), 79 · Published 1 January 2020 · DOI 10.3390/electronics9010079
In brief
“Experimental Frequency Tuning Methodology of a Cantilever Piezoelectric Harvester Validated in a Multimodal Transportation” is a 2020 journal article by Ruben Del‐Rio‐Ruiz and 4 co-authors, published in Electronics. OpenAlex counts 8 citations as of 22 November 2026, which puts it in the top 8% of works published in 2020 by citations. It is open access under a CC BY licence: the full text is free to read at Electronics.
- Citations
- 8
- Most cited in
- 2021 (4)
- Field-weighted impact
- 0.93
- References
- 31
- Authors
- 5
Abstract
Piezoelectric energy harvesting is a promising technology that increases the autonomy of low power IoT devices in scenarios that are subjected to mechanical vibrations. This work shows the potential of this technology to power IoT devices with the energy that is harvested from vibrations occurred during air and road transportation. Adjusting the natural resonance frequency of the piezoelectric generator (PEG) to the mechanical acceleration frequency that has the highest power spectral density is key to increase the harvested energy. Therefore, in this work a commercial PEG is tuned to the best spectrogram frequency of a real vibration signal following a two-phase tuning process. The harvested power generated by the PEG has been validated in real scenarios, providing 2.4 μ Wh during flight (take-off, cruise flight, and landing), 11.3 μ Wh during truck transportation in urban areas, and 4.8 μ Wh during intercity transportation. The PEG has been embedded in an ultra-low power IoT device to validate how much this harvested energy can increase the autonomy in a real scenario that is subjected to similar vibrations. An NFC temperature data logger is developed for perishable products that are transported by air and road transports. The energy harvested by the PEG tuned with the methodology proposed in this work has increased the autonomy of the data logger 16.7% during a real use case of 30 h, which validates the potential of the piezoelectric energy harvesting technology to increase the autonomy of future low power IoT devices used in scenarios with aperiodic vibrations.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Del‐Rio‐Ruiz, R., Echevarria, J. J., Eguiluz, X., Lopez-Garde, J.-M., & Legarda, J. (2020). Experimental Frequency Tuning Methodology of a Cantilever Piezoelectric Harvester Validated in a Multimodal Transportation. Electronics, 9(1), 79. https://doi.org/10.3390/electronics9010079
MLA 9
Del‐Rio‐Ruiz, Ruben, et al. “Experimental Frequency Tuning Methodology of a Cantilever Piezoelectric Harvester Validated in a Multimodal Transportation.” Electronics, vol. 9, no. 1, 2020, p. 79. https://doi.org/10.3390/electronics9010079.
Chicago
Del‐Rio‐Ruiz, Ruben, Juan José Echevarria, Xabier Eguiluz, Juan-Manuel Lopez-Garde, and Jon Legarda. 2020. “Experimental Frequency Tuning Methodology of a Cantilever Piezoelectric Harvester Validated in a Multimodal Transportation.” Electronics 9 (1): 79. https://doi.org/10.3390/electronics9010079.
Harvard
Del‐Rio‐Ruiz, R. et al. (2020) ‘Experimental Frequency Tuning Methodology of a Cantilever Piezoelectric Harvester Validated in a Multimodal Transportation’, Electronics, 9(1), p. 79. doi:10.3390/electronics9010079.
IEEE
R. Del‐Rio‐Ruiz, J. J. Echevarria, X. Eguiluz, J.-M. Lopez-Garde, and J. Legarda, “Experimental Frequency Tuning Methodology of a Cantilever Piezoelectric Harvester Validated in a Multimodal Transportation,” Electronics, vol. 9, no. 1, p. 79, 2020, doi: 10.3390/electronics9010079.
BibTeX
@article{delrioruiz2020experimental,
title = {{Experimental Frequency Tuning Methodology of a Cantilever Piezoelectric Harvester Validated in a Multimodal Transportation}},
author = {Del‐Rio‐Ruiz, Ruben and Echevarria, Juan José and Eguiluz, Xabier and Lopez-Garde, Juan-Manuel and Legarda, Jon},
journal = {Electronics},
year = {2020},
volume = {9},
number = {1},
pages = {79},
doi = {10.3390/electronics9010079},
url = {https://doi.org/10.3390/electronics9010079}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2020 | 2 | |
| 2021 | 4 | |
| 2022 | 2 |
Its field-weighted citation impact is 0.93: it has been cited 0.93 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Innovative Energy Harvesting Technologies
- piezoelectric energy harvesting
- frequency tuning
- vibration energy harvesting
- airline industry
- road transport
- truck vibration
- power spectral density
- spectrogram
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Del‐Rio‐Ruiz, R., Echevarria, J. J., Eguiluz, X., Lopez-Garde, J.-M., & Legarda, J. (2020). Experimental Frequency Tuning Methodology of a Cantilever Piezoelectric Harvester Validated in a Multimodal Transportation. Electronics, 9(1), 79. https://doi.org/10.3390/electronics9010079
How many times has this paper been cited?
8 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Electronics: sign in and open the PDF from this page.
Who wrote this paper?
Ruben Del‐Rio‐Ruiz, Juan José Echevarria, Xabier Eguiluz, Juan-Manuel Lopez-Garde, Jon Legarda.
What is the DOI of this paper?
10.3390/electronics9010079, permanently at https://doi.org/10.3390/electronics9010079. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.