Journal article · 2026 · Open access

Experimental and numerical response in SLS-manufactured polyamide-12 octet-truss lattice under tension and compression

Soheil Gholibeygi, Bahar Ayhan, Hale Ergün

Progress in Additive Manufacturing, 11(10), 10405–10431 · Published 24 August 2026 · DOI 10.1007/s40964-026-01905-3

Open PDFView at the publisherCite this paper

In brief

“Experimental and numerical response in SLS-manufactured polyamide-12 octet-truss lattice under tension and compression” is a 2026 journal article by Soheil Gholibeygi and 2 co-authors, published in Progress in Additive Manufacturing. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Research Square.

Citations
0
References
54
Authors
3

Abstract

Additively manufactured lattice structures, particularly stretch-dominated topologies such as the octet-truss, offer exceptional stiffness-to-weight ratios. However, significant discrepancies often arise between numerical predictions based on as-designed geometries and corresponding experimental responses. This study presents a comprehensive mechanical characterization of octet-truss lattice structure made of Selective Laser Sintering fabricated Polyamid-12 under both tensile and compressive loadings. Two different plasticity material models are considered for the calibration of the material models in FEM simulations. Material plastic data for Von Mises model and parameters for Drucker-Prager model are presented. Optic and Environmental Scanning Electronic Microscope images of the fractured surfaces of the specimens are presented. Morphology of the fractured surfaces revealed whitened regions with fibrillation indicating ductile failure and darker regions with intra/interlayer failure modes and spherulites indicating brittle failure. Drucker-Prager plastic hardening model with nominal strut diameter exhibited a good approximation of the compressive lattice specimens and captured the experimental elastic, plastic and densification regions, especially for the specimen with a layer-by-layer failure. The overestimated numerical result of the tensile lattice specimen is attributed to the manufacturing error, unsintered layer and the porosity, and modified by the effective diameter of the struts. The study establishes a quantitative link between manufacturing-induced variability and mechanical behavior, providing a predictive framework for more reliable design of high-performance lattice metamaterials.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Gholibeygi, S., Ayhan, B., & Ergün, H. (2026). Experimental and numerical response in SLS-manufactured polyamide-12 octet-truss lattice under tension and compression. Progress in Additive Manufacturing, 11(10), 10405–10431. https://doi.org/10.1007/s40964-026-01905-3

MLA 9

Gholibeygi, Soheil, et al. “Experimental and numerical response in SLS-manufactured polyamide-12 octet-truss lattice under tension and compression.” Progress in Additive Manufacturing, vol. 11, no. 10, 2026, pp. 10405–10431. https://doi.org/10.1007/s40964-026-01905-3.

Chicago

Gholibeygi, Soheil, Bahar Ayhan, and Hale Ergün. 2026. “Experimental and numerical response in SLS-manufactured polyamide-12 octet-truss lattice under tension and compression.” Progress in Additive Manufacturing 11 (10): 10405–10431. https://doi.org/10.1007/s40964-026-01905-3.

Harvard

Gholibeygi, S., Ayhan, B. and Ergün, H. (2026) ‘Experimental and numerical response in SLS-manufactured polyamide-12 octet-truss lattice under tension and compression’, Progress in Additive Manufacturing, 11(10), pp. 10405–10431. doi:10.1007/s40964-026-01905-3.

IEEE

S. Gholibeygi, B. Ayhan, and H. Ergün, “Experimental and numerical response in SLS-manufactured polyamide-12 octet-truss lattice under tension and compression,” Progress in Additive Manufacturing, vol. 11, no. 10, pp. 10405–10431, 2026, doi: 10.1007/s40964-026-01905-3.

BibTeX

@article{gholibeygi2026experimental,
  title     = {{Experimental and numerical response in SLS-manufactured polyamide-12 octet-truss lattice under tension and compression}},
  author    = {Gholibeygi, Soheil and Ayhan, Bahar and Ergün, Hale},
  journal   = {Progress in Additive Manufacturing},
  year      = {2026},
  volume    = {11},
  number    = {10},
  pages     = {10405--10431},
  doi       = {10.1007/s40964-026-01905-3},
  url       = {https://doi.org/10.1007/s40964-026-01905-3}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures

  • octet-truss lattice
  • polyamide 12
  • selective laser sintering
  • lattice metamaterials
  • tensile and compressive behavior
  • von Mises plasticity
  • material model calibration
  • fracture morphology

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Gholibeygi, S., Ayhan, B., & Ergün, H. (2026). Experimental and numerical response in SLS-manufactured polyamide-12 octet-truss lattice under tension and compression. Progress in Additive Manufacturing, 11(10), 10405–10431. https://doi.org/10.1007/s40964-026-01905-3

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Research Square: sign in and open the PDF from this page.

Who wrote this paper?

Soheil Gholibeygi, Bahar Ayhan, Hale Ergün.

What is the DOI of this paper?

10.1007/s40964-026-01905-3, permanently at https://doi.org/10.1007/s40964-026-01905-3. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.