Journal article · 2024 · Open access

Excellent piezoelectric and ferroelectric properties of ScxGa1−xN alloy with high Sc concentration

Masato Uehara, Kenji Hirata, Yoshiko Nakamura, Sri Ayu Anggraini, Kazuki Okamoto, Hiroshi Yamada, Hiroshi Funakubo, Morito Akiyama

APL Materials, 12(12), 1 · Published 1 December 2024 · DOI 10.1063/5.0236507

Open PDFView at the publisherCite this paper

In brief

“Excellent piezoelectric and ferroelectric properties of ScxGa1−xN alloy with high Sc concentration” is a 2024 journal article by Masato Uehara and 7 co-authors, published in APL Materials. OpenAlex counts 17 citations as of 18 November 2026, which puts it in the top 2% of works published in 2024 by citations. It is open access under a CC BY licence: the full text is free to read at APL Materials.

Citations
17
Most cited in
2025 (10)
Field-weighted impact
1.33
References
68
Authors
8

Abstract

Alloying wurtzite aluminum nitride and gallium nitride (GaN) with scandium (Sc) enhances the piezoelectric and ferroelectric properties, but increasing the Sc concentration while maintaining the wurtzite phase is a major challenge. We meticulously optimized the sputtering conditions to successfully obtain a high-Sc-concentration GaN alloy (ScxGa1−xN, 0.44 < x ≤ 0.53), which has not yet been achieved. The prepared ScxGa1−xN films exhibit excellent piezoelectricity and ferroelectricity. The maximum piezoelectric constant d33 of 33 pC/N exceeds the values of ScxAl1−xN used in radio frequency filters. The minimum coercive field of ferroelectricity Ec of 1.49 MV/cm is the lowest of any ferroelectric wurtzite to date and is comparable to those of state-of-the-art ferroelectric HfO2-based materials used in compute-in-memory for artificial intelligence. Structural analysis showed that the ScxGa1−xN films have a c-axis-oriented wurtzite texture without a rock salt phase. The lattice constant ratio c/a varies greatly depending on the sputtering conditions. Decreasing c/a causes d33 to increase almost linearly, and minimizing Ec requires a small c/a and high Sc concentration.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Uehara, M., Hirata, K., Nakamura, Y., Anggraini, S. A., Okamoto, K., Yamada, H., Funakubo, H., & Akiyama, M. (2024). Excellent piezoelectric and ferroelectric properties of ScxGa1−xN alloy with high Sc concentration. APL Materials, 12(12), 1. https://doi.org/10.1063/5.0236507

MLA 9

Uehara, Masato, et al. “Excellent piezoelectric and ferroelectric properties of ScxGa1−xN alloy with high Sc concentration.” APL Materials, vol. 12, no. 12, 2024, p. 1. https://doi.org/10.1063/5.0236507.

Chicago

Uehara, Masato, Kenji Hirata, Yoshiko Nakamura, Sri Ayu Anggraini, Kazuki Okamoto, Hiroshi Yamada, Hiroshi Funakubo, and Morito Akiyama. 2024. “Excellent piezoelectric and ferroelectric properties of ScxGa1−xN alloy with high Sc concentration.” APL Materials 12 (12): 1. https://doi.org/10.1063/5.0236507.

Harvard

Uehara, M. et al. (2024) ‘Excellent piezoelectric and ferroelectric properties of ScxGa1−xN alloy with high Sc concentration’, APL Materials, 12(12), p. 1. doi:10.1063/5.0236507.

IEEE

M. Uehara et al., “Excellent piezoelectric and ferroelectric properties of ScxGa1−xN alloy with high Sc concentration,” APL Materials, vol. 12, no. 12, p. 1, 2024, doi: 10.1063/5.0236507.

BibTeX

@article{uehara2024excellent,
  title     = {{Excellent piezoelectric and ferroelectric properties of ScxGa1−xN alloy with high Sc concentration}},
  author    = {Uehara, Masato and Hirata, Kenji and Nakamura, Yoshiko and Anggraini, Sri Ayu and Okamoto, Kazuki and Yamada, Hiroshi and Funakubo, Hiroshi and Akiyama, Morito},
  journal   = {APL Materials},
  year      = {2024},
  volume    = {12},
  number    = {12},
  pages     = {1},
  doi       = {10.1063/5.0236507},
  url       = {https://doi.org/10.1063/5.0236507}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices

  • piezoelectric properties
  • ferroelectricity
  • wurtzite structure
  • sputtering conditions
  • piezoelectric coefficient d33
  • coercive field
  • c-axis orientation
  • thin films

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Uehara, M., Hirata, K., Nakamura, Y., Anggraini, S. A., Okamoto, K., Yamada, H., Funakubo, H., & Akiyama, M. (2024). Excellent piezoelectric and ferroelectric properties of ScxGa1−xN alloy with high Sc concentration. APL Materials, 12(12), 1. https://doi.org/10.1063/5.0236507

How many times has this paper been cited?

17 times, according to OpenAlex on 18 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at APL Materials: sign in and open the PDF from this page.

Who wrote this paper?

Masato Uehara, Kenji Hirata, Yoshiko Nakamura, Sri Ayu Anggraini, Kazuki Okamoto, Hiroshi Yamada, Hiroshi Funakubo, Morito Akiyama.

What is the DOI of this paper?

10.1063/5.0236507, permanently at https://doi.org/10.1063/5.0236507. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 18 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.