Journal article · 2013
Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy
Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 228(2), 191–202 · Published 4 September 2013 · DOI 10.1177/0954405413500243
In brief
“Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy” is a 2013 journal article by Shoujin Sun and 2 co-authors, published in Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture. OpenAlex counts 85 citations as of 20 November 2026. The publisher's version is not open access, and OpenAlex records no free legal copy.
- Citations
- 85
- Most cited in
- 2022 (12)
- Field-weighted impact
- 8.88
- References
- 47
- Authors
- 3
Abstract
Variation of cutting forces has been investigated and correlated with the development of tool wear during dry machining of Ti-6Al-4V alloy at cutting speeds of 150 and 220 m/min, respectively. Both the average and maximum flank wear increased more significantly with volume of material removed at higher cutting speed. The tool failure mode is flank… Read the full abstract at the publisher.
Excerpt. This paper is not open access.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Sun, S., Brandt, M., & Mo, J. P. (2013). Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 228(2), 191–202. https://doi.org/10.1177/0954405413500243
MLA 9
Sun, Shoujin, et al. “Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy.” Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, vol. 228, no. 2, 2013, pp. 191–202. https://doi.org/10.1177/0954405413500243.
Chicago
Sun, Shoujin, Milan Brandt, and John P.T. Mo. 2013. “Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy.” Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture 228 (2): 191–202. https://doi.org/10.1177/0954405413500243.
Harvard
Sun, S., Brandt, M. and Mo, J. P. (2013) ‘Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy’, Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 228(2), pp. 191–202. doi:10.1177/0954405413500243.
IEEE
S. Sun, M. Brandt, and J. P. Mo, “Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy,” Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, vol. 228, no. 2, pp. 191–202, 2013, doi: 10.1177/0954405413500243.
BibTeX
@article{sun2013evolution,
title = {{Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy}},
author = {Sun, Shoujin and Brandt, Milan and Mo, John P.T.},
journal = {Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture},
year = {2013},
volume = {228},
number = {2},
pages = {191--202},
doi = {10.1177/0954405413500243},
url = {https://doi.org/10.1177/0954405413500243}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2017 | 7 | |
| 2018 | 6 | |
| 2019 | 6 | |
| 2020 | 7 | |
| 2021 | 7 | |
| 2022 | 12 | |
| 2023 | 5 | |
| 2024 | 6 | |
| 2025 | 5 | |
| 2026 | 3 |
Its field-weighted citation impact is 8.88: it has been cited 8.88 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- tool wear
- cutting force
- dry machining
- Ti-6Al-4V
- flank wear
- crater wear
- cutting speed
- tool life
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Sun, S., Brandt, M., & Mo, J. P. (2013). Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 228(2), 191–202. https://doi.org/10.1177/0954405413500243
How many times has this paper been cited?
85 times, according to OpenAlex on 20 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
OpenAlex records no free legal copy. Check your library's access, the authors' pages or a repository, or ask the corresponding author for a copy.
Who wrote this paper?
Shoujin Sun, Milan Brandt, John P.T. Mo.
What is the DOI of this paper?
10.1177/0954405413500243, permanently at https://doi.org/10.1177/0954405413500243. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 20 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.