Conference paper · 2015 · Open access
EVOLUTION OF THE MICROSTRUCTURE AND TEXTURE DURING ANNEALING OF A NIOBIUM STABILIZED FERRITIC STAINLESS STEEL
International Symposium on Crystallography, 35 · Published 1 January 2015 · DOI 10.5151/phypro-sic100-035
In brief
“EVOLUTION OF THE MICROSTRUCTURE AND TEXTURE DURING ANNEALING OF A NIOBIUM STABILIZED FERRITIC STAINLESS STEEL” is a 2015 conference paper by Daniella Gomes Rodrigues and 3 co-authors, published in International Symposium on Crystallography. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at International Symposium on Crystallography.
- Citations
- 0
- Authors
- 4
Abstract
The ferritic stainless steels are materials used in several segments due the excellent combination of mechanical properties and corrosion resistance. The properties of these alloys are strongly dependent on the microstructural characteristics and texture. Thus, knowledge of the microstructure and texture development is essential to optimize the mechanical properties. The aim of this study was to analyze the evolution of recrystallization and texture of a ferritic stainless steel stabilized with niobium, type AISI430. The samples cold rolled to a reduction in thickness of 85% were annealed by applying heating rate of 41.5°C/s. The annealing was interrupted at 780, 830 and 880°C to verify the microstructure and texture changes. The nominal annealing temperature was 880°C and the soaking time was 25s. The technique used to characterize the changes in microstructure and texture was optic microscopy and high resolution Electron Backscatter Diffraction (EBSD). The samples removed at 780, 830 and 880°C were partially recrystallized with the matrix composed of non-recrystallized and recrystallized regions. The recrystallized grains were observed mainly in prior high angle boundaries. The a-fiber was more intense than g-fiber at 780°C and 830°C. On the other hand, at 880°C it was observed a decrease in intensity of a-fiber and an increase g-fiber intensity. These results indicate that the grains of the a-fiber, with low stored energy, are consumed during the process of recrystallization.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Rodrigues, D. G., Gonzalez, B. M., de Oliveira, T. R., & de Alcântara, C. M. (2015). EVOLUTION OF THE MICROSTRUCTURE AND TEXTURE DURING ANNEALING OF A NIOBIUM STABILIZED FERRITIC STAINLESS STEEL. International Symposium on Crystallography, 35. https://doi.org/10.5151/phypro-sic100-035
MLA 9
Rodrigues, Daniella Gomes, et al. “EVOLUTION OF THE MICROSTRUCTURE AND TEXTURE DURING ANNEALING OF A NIOBIUM STABILIZED FERRITIC STAINLESS STEEL.” International Symposium on Crystallography, 2015, p. 35. https://doi.org/10.5151/phypro-sic100-035.
Chicago
Rodrigues, Daniella Gomes, Berenice Mendonça Gonzalez, Tarcísio Reis de Oliveira, and Cláudio Moreira de Alcântara. 2015. “EVOLUTION OF THE MICROSTRUCTURE AND TEXTURE DURING ANNEALING OF A NIOBIUM STABILIZED FERRITIC STAINLESS STEEL.” International Symposium on Crystallography: 35. https://doi.org/10.5151/phypro-sic100-035.
Harvard
Rodrigues, D. G. et al. (2015) ‘EVOLUTION OF THE MICROSTRUCTURE AND TEXTURE DURING ANNEALING OF A NIOBIUM STABILIZED FERRITIC STAINLESS STEEL’, International Symposium on Crystallography, p. 35. doi:10.5151/phypro-sic100-035.
IEEE
D. G. Rodrigues, B. M. Gonzalez, T. R. de Oliveira, and C. M. de Alcântara, “EVOLUTION OF THE MICROSTRUCTURE AND TEXTURE DURING ANNEALING OF A NIOBIUM STABILIZED FERRITIC STAINLESS STEEL,” International Symposium on Crystallography, p. 35, 2015, doi: 10.5151/phypro-sic100-035.
BibTeX
@inproceedings{rodrigues2015evolution,
title = {{EVOLUTION OF THE MICROSTRUCTURE AND TEXTURE DURING ANNEALING OF A NIOBIUM STABILIZED FERRITIC STAINLESS STEEL}},
author = {Rodrigues, Daniella Gomes and Gonzalez, Berenice Mendonça and de Oliveira, Tarcísio Reis and de Alcântara, Cláudio Moreira},
booktitle = {International Symposium on Crystallography},
year = {2015},
pages = {35},
doi = {10.5151/phypro-sic100-035},
url = {https://doi.org/10.5151/phypro-sic100-035}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels
- AISI 430 stainless steel
- annealing
- recrystallization
- crystallographic texture
- microstructure evolution
- cold rolling
- high-angle grain boundaries
- stored energy
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Rodrigues, D. G., Gonzalez, B. M., de Oliveira, T. R., & de Alcântara, C. M. (2015). EVOLUTION OF THE MICROSTRUCTURE AND TEXTURE DURING ANNEALING OF A NIOBIUM STABILIZED FERRITIC STAINLESS STEEL. International Symposium on Crystallography, 35. https://doi.org/10.5151/phypro-sic100-035
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at International Symposium on Crystallography: sign in and open the PDF from this page.
Who wrote this paper?
Daniella Gomes Rodrigues, Berenice Mendonça Gonzalez, Tarcísio Reis de Oliveira, Cláudio Moreira de Alcântara.
What is the DOI of this paper?
10.5151/phypro-sic100-035, permanently at https://doi.org/10.5151/phypro-sic100-035. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.