Journal article · 2022 · Open access

Evaluation of two complementary modeling approaches for fiber-reinforced soft actuators

Soheil Habibian, Benjamin Wheatley, Suehye Bae, Joon Shin, Keith W. Buffinton

ROBOMECH Journal, 9(1), 12 · Published 21 May 2022 · DOI 10.1186/s40648-022-00225-9

Open PDFView at the publisherCite this paper

In brief

“Evaluation of two complementary modeling approaches for fiber-reinforced soft actuators” is a 2022 journal article by Soheil Habibian and 4 co-authors, published in ROBOMECH Journal. OpenAlex counts 6 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at ROBOMECH Journal.

Citations
6
Most cited in
2025 (3)
Field-weighted impact
0.31
References
57
Authors
5

Abstract

Although robots are increasingly found in a wide range of applications, their use in proximity to humans is still fraught with challenges, primarily due to safety concerns. Roboticists have been seeking to address this situation in recent years through the use of soft robots. Unfortunately, identifying appropriate models for the complete analysis and investigation of soft robots for design and control purposes can be problematic. This paper seeks to address this challenge by proposing two complementary modeling techniques for a particular type of soft robotic actuator known as a Fiber-Reinforced Elastomeric Enclosure (FREE). We propose that researchers can leverage multiple models to fill gaps in the understanding of the behavior of soft robots. We present and evaluate both a dynamic, lumped-parameter model and a finite element model to extend understanding of the practicability of FREEs in soft robotic applications. The results of experimental simulations using a lumped-parameter model show that at low pressures FREE winding angle and radius change no more than $$2\%$$ 2% . This observation provided confidence that a linearized, dynamic, lumped-mass model could be successfully used for FREE controller development. Results with the lumped-parameter model demonstrate that it predicts the actual rotational motion of a FREE with at most $$4\%$$ 4% error when a closed-loop controller is embedded in the system. Additionally, finite element analysis was used to study FREE design parameters as well as the workspace achieved with a module comprised of multiple FREEs. Our finite element results indicate that variations in the material properties of the elastic enclosure of a FREE are more significant than variations in fiber properties (primarily because the fibers are essentially inextensible in comparison to the elastic enclosure). Our finite element analysis confirms the results obtained by previous researchers for the impact of variations in winding angle on FREE rotation, and we extend these results to include an analysis of the effect of winding angle on FREE force and moment generation. Finally, finite element results show that a $$30^{\circ }$$ 30∘ difference in winding angle dramatically alters the shape of the workspace generated by four FREEs assembled into a module. Concludingly, comments are made about the relative advantages and limitations of lumped-parameter and finite element models of FREEs and FREE modules in providing useful insights into their behavior.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Habibian, S., Wheatley, B., Bae, S., Shin, J., & Buffinton, K. W. (2022). Evaluation of two complementary modeling approaches for fiber-reinforced soft actuators. ROBOMECH Journal, 9(1), 12. https://doi.org/10.1186/s40648-022-00225-9

MLA 9

Habibian, Soheil, et al. “Evaluation of two complementary modeling approaches for fiber-reinforced soft actuators.” ROBOMECH Journal, vol. 9, no. 1, 2022, p. 12. https://doi.org/10.1186/s40648-022-00225-9.

Chicago

Habibian, Soheil, Benjamin Wheatley, Suehye Bae, Joon Shin, and Keith W. Buffinton. 2022. “Evaluation of two complementary modeling approaches for fiber-reinforced soft actuators.” ROBOMECH Journal 9 (1): 12. https://doi.org/10.1186/s40648-022-00225-9.

Harvard

Habibian, S. et al. (2022) ‘Evaluation of two complementary modeling approaches for fiber-reinforced soft actuators’, ROBOMECH Journal, 9(1), p. 12. doi:10.1186/s40648-022-00225-9.

IEEE

S. Habibian, B. Wheatley, S. Bae, J. Shin, and K. W. Buffinton, “Evaluation of two complementary modeling approaches for fiber-reinforced soft actuators,” ROBOMECH Journal, vol. 9, no. 1, p. 12, 2022, doi: 10.1186/s40648-022-00225-9.

BibTeX

@article{habibian2022evaluation,
  title     = {{Evaluation of two complementary modeling approaches for fiber-reinforced soft actuators}},
  author    = {Habibian, Soheil and Wheatley, Benjamin and Bae, Suehye and Shin, Joon and Buffinton, Keith W.},
  journal   = {ROBOMECH Journal},
  year      = {2022},
  volume    = {9},
  number    = {1},
  pages     = {12},
  doi       = {10.1186/s40648-022-00225-9},
  url       = {https://doi.org/10.1186/s40648-022-00225-9}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202322
202533
202611

Its field-weighted citation impact is 0.31: it has been cited 0.31 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft robotic actuators
  • lumped parameter model
  • finite element analysis
  • winding angle
  • pneumatic actuators

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Habibian, S., Wheatley, B., Bae, S., Shin, J., & Buffinton, K. W. (2022). Evaluation of two complementary modeling approaches for fiber-reinforced soft actuators. ROBOMECH Journal, 9(1), 12. https://doi.org/10.1186/s40648-022-00225-9

How many times has this paper been cited?

6 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at ROBOMECH Journal: sign in and open the PDF from this page.

Who wrote this paper?

Soheil Habibian, Benjamin Wheatley, Suehye Bae, Joon Shin, Keith W. Buffinton.

What is the DOI of this paper?

10.1186/s40648-022-00225-9, permanently at https://doi.org/10.1186/s40648-022-00225-9. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.