Journal article · 2009 · Open access

Evaluating a steel beam’s rigid connection to a concrete filled tubular column when submitted to dynamic load

Maritza Uribe Vallejo, Gabriel F. Valencia Clement

Ingeniería e Investigación, 29(1), 24–34 · Published 1 January 2009 · DOI 10.15446/ing.investig.v29n1.15139

Open PDFView at the publisherCite this paper

In brief

“Evaluating a steel beam’s rigid connection to a concrete filled tubular column when submitted to dynamic load” is a 2009 journal article by Maritza Uribe Vallejo and Gabriel F. Valencia Clement, published in Ingeniería e Investigación. OpenAlex counts 3 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Ingeniería e Investigación.

Citations
3
Most cited in
2022 (2)
References
2
Authors
2

Abstract

Using prequalified connections during the structural design stage becomes increasingly necessary when developing structural engineering projects which include steel elements; this is so that the steel elements’ appropriate behavior can be ensured according to the structural system and seismic demand. Unfortunately, the international entities providing this type of information (i.e. FEMA) only have a limit series of prequalified connections and such series do not include rigid connections between steel beams and concrete filled tubular (CFT) columns having an extended end plate, which has become a very widespread building practice in Colombia. This paper describes the most important aspects of a study at the Universidad Nacional de Colombia concerning the behavior of a steel beam rigidly connected to a CFT-column, using six physical models having different width-thickness ratio (b/t) columns. ANSYS v.10 software was used for studying theoretical models (finite elements analysis) for comparative analysis of cyclic test theoretical and experimental results for each specimen presented for the qualification phase. The six tested specimens’ hysteretic curves are presented. Several conclusions are drawn concerning finite element validation for this type of connection and the influence of width-thickness ratio (b/t) variation and design recommendations for suitable behavior under dynamic loads when this type of connection was used.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Vallejo, M. U., & Clement, G. F. V. (2009). Evaluating a steel beam’s rigid connection to a concrete filled tubular column when submitted to dynamic load. Ingeniería e Investigación, 29(1), 24–34. https://doi.org/10.15446/ing.investig.v29n1.15139

MLA 9

Vallejo, Maritza Uribe, and Gabriel F. Valencia Clement. “Evaluating a steel beam’s rigid connection to a concrete filled tubular column when submitted to dynamic load.” Ingeniería e Investigación, vol. 29, no. 1, 2009, pp. 24–34. https://doi.org/10.15446/ing.investig.v29n1.15139.

Chicago

Vallejo, Maritza Uribe and Gabriel F. Valencia Clement. 2009. “Evaluating a steel beam’s rigid connection to a concrete filled tubular column when submitted to dynamic load.” Ingeniería e Investigación 29 (1): 24–34. https://doi.org/10.15446/ing.investig.v29n1.15139.

Harvard

Vallejo, M. U. and Clement, G. F. V. (2009) ‘Evaluating a steel beam’s rigid connection to a concrete filled tubular column when submitted to dynamic load’, Ingeniería e Investigación, 29(1), pp. 24–34. doi:10.15446/ing.investig.v29n1.15139.

IEEE

M. U. Vallejo and G. F. V. Clement, “Evaluating a steel beam’s rigid connection to a concrete filled tubular column when submitted to dynamic load,” Ingeniería e Investigación, vol. 29, no. 1, pp. 24–34, 2009, doi: 10.15446/ing.investig.v29n1.15139.

BibTeX

@article{vallejo2009evaluating,
  title     = {{Evaluating a steel beam’s rigid connection to a concrete filled tubular column when submitted to dynamic load}},
  author    = {Vallejo, Maritza Uribe and Clement, Gabriel F. Valencia},
  journal   = {Ingeniería e Investigación},
  year      = {2009},
  volume    = {29},
  number    = {1},
  pages     = {24--34},
  doi       = {10.15446/ing.investig.v29n1.15139},
  url       = {https://doi.org/10.15446/ing.investig.v29n1.15139}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Civil and Structural Engineering › Structural Load-Bearing Analysis

  • steel beam-column connections
  • concrete-filled steel tube columns
  • extended end plate
  • rigid connections
  • dynamic loading
  • cyclic loading
  • hysteretic behavior
  • width-to-thickness ratio

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Vallejo, M. U., & Clement, G. F. V. (2009). Evaluating a steel beam’s rigid connection to a concrete filled tubular column when submitted to dynamic load. Ingeniería e Investigación, 29(1), 24–34. https://doi.org/10.15446/ing.investig.v29n1.15139

How many times has this paper been cited?

3 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Ingeniería e Investigación: sign in and open the PDF from this page.

Who wrote this paper?

Maritza Uribe Vallejo, Gabriel F. Valencia Clement.

What is the DOI of this paper?

10.15446/ing.investig.v29n1.15139, permanently at https://doi.org/10.15446/ing.investig.v29n1.15139. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.