Journal article · 2024 · Open access

Enhancing compliant gripper performance: Exploiting electro-adhesion to increase lifting force over grasping force

Amedeo Carloni, Marcello Valori, Federico Bertolucci, Lorenzo Agostini, Giovanni Berselli, Irene Fassi, Lorenzo Molinari Tosatti, Rocco Vertechy

Robotics and Computer-Integrated Manufacturing, 91, 102843 · Published 10 August 2024 · DOI 10.1016/j.rcim.2024.102843

Open PDFCite this paper

In brief

“Enhancing compliant gripper performance: Exploiting electro-adhesion to increase lifting force over grasping force” is a 2024 journal article by Amedeo Carloni and 7 co-authors, published in Robotics and Computer-Integrated Manufacturing. OpenAlex counts 16 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Robotics and Computer-Integrated Manufacturing.

Citations
16
Most cited in
2025 (8)
Field-weighted impact
1.33
References
35
Authors
8

Abstract

On the landscape of solutions to deal with delicate objects, the development and use of soft grippers is a topic of increasing interest, with a large number of prototypes proposed by the research community employing non-linear soft materials and based on diverse actuation means. However, increasing compliance usually leads to the reduction of lifting capacity. As a recent promising approach, shear forces exerted by a soft gripper can be enhanced by exploiting the electro-adhesion (EA) effect. Following this research trend, this paper proposes a new gripper that combines a compliant finger structure, with geometry taken from the FESTO FinRay but made of a softer material (a urethane rubber), and custom EA pads that are placed on the fingers at the interface with the grasped object. Following hyper-elastic model identification of the considered material and preliminary functional verification of gripper design via finite element simulations, the gripper is then manufactured and tested by means of a specific setup, replicating the grasping and lifting of cylindrical objects with different diameters. The results clearly show that the new gripper makes it possible to generate holding forces similar to those of the FESTO FinRay, but with significantly lower pressures on the grasped object (77 % less). Besides enabling the handling of more fragile items, the drastic increase in gripper compliance also results in lower mechanical actuation force (namely, 71 % less of gripping energy) required to generate the same holding force, with a consequent reduction of operation costs and sustainability of its application.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Carloni, A., Valori, M., Bertolucci, F., Agostini, L., Berselli, G., Fassi, I., Tosatti, L. M., & Vertechy, R. (2024). Enhancing compliant gripper performance: Exploiting electro-adhesion to increase lifting force over grasping force. Robotics and Computer-Integrated Manufacturing, 91, 102843. https://doi.org/10.1016/j.rcim.2024.102843

MLA 9

Carloni, Amedeo, et al. “Enhancing compliant gripper performance: Exploiting electro-adhesion to increase lifting force over grasping force.” Robotics and Computer-Integrated Manufacturing, vol. 91, 2024, p. 102843. https://doi.org/10.1016/j.rcim.2024.102843.

Chicago

Carloni, Amedeo, Marcello Valori, Federico Bertolucci, Lorenzo Agostini, Giovanni Berselli, Irene Fassi, Lorenzo Molinari Tosatti, and Rocco Vertechy. 2024. “Enhancing compliant gripper performance: Exploiting electro-adhesion to increase lifting force over grasping force.” Robotics and Computer-Integrated Manufacturing 91: 102843. https://doi.org/10.1016/j.rcim.2024.102843.

Harvard

Carloni, A. et al. (2024) ‘Enhancing compliant gripper performance: Exploiting electro-adhesion to increase lifting force over grasping force’, Robotics and Computer-Integrated Manufacturing, 91, p. 102843. doi:10.1016/j.rcim.2024.102843.

IEEE

A. Carloni et al., “Enhancing compliant gripper performance: Exploiting electro-adhesion to increase lifting force over grasping force,” Robotics and Computer-Integrated Manufacturing, vol. 91, p. 102843, 2024, doi: 10.1016/j.rcim.2024.102843.

BibTeX

@article{carloni2024enhancing,
  title     = {{Enhancing compliant gripper performance: Exploiting electro-adhesion to increase lifting force over grasping force}},
  author    = {Carloni, Amedeo and Valori, Marcello and Bertolucci, Federico and Agostini, Lorenzo and Berselli, Giovanni and Fassi, Irene and Tosatti, Lorenzo Molinari and Vertechy, Rocco},
  journal   = {Robotics and Computer-Integrated Manufacturing},
  year      = {2024},
  volume    = {91},
  pages     = {102843},
  doi       = {10.1016/j.rcim.2024.102843},
  url       = {https://doi.org/10.1016/j.rcim.2024.102843}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202411
202588
202677

Its field-weighted citation impact is 1.33: it has been cited 1.33 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft gripper
  • compliant gripper
  • delicate object handling
  • lift force
  • grasping force
  • urethane rubber
  • holding force

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Carloni, A., Valori, M., Bertolucci, F., Agostini, L., Berselli, G., Fassi, I., Tosatti, L. M., & Vertechy, R. (2024). Enhancing compliant gripper performance: Exploiting electro-adhesion to increase lifting force over grasping force. Robotics and Computer-Integrated Manufacturing, 91, 102843. https://doi.org/10.1016/j.rcim.2024.102843

How many times has this paper been cited?

16 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Robotics and Computer-Integrated Manufacturing: sign in and open the PDF from this page.

Who wrote this paper?

Amedeo Carloni, Marcello Valori, Federico Bertolucci, Lorenzo Agostini, Giovanni Berselli, Irene Fassi, Lorenzo Molinari Tosatti, Rocco Vertechy.

What is the DOI of this paper?

10.1016/j.rcim.2024.102843, permanently at https://doi.org/10.1016/j.rcim.2024.102843. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.