Journal article · 2014 · Open access
Enhancement of ruthenium-promoted Co/CNT nanocatalyst performance using microemulsion technique
International Journal of Industrial Chemistry, 5(1), 1 · Published 1 January 2014 · DOI 10.1007/s40090-014-0009-5
In brief
“Enhancement of ruthenium-promoted Co/CNT nanocatalyst performance using microemulsion technique” is a 2014 journal article by Ahmad Tavasoli and 3 co-authors, published in International Journal of Industrial Chemistry. OpenAlex counts 16 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at International Journal of Industrial Chemistry.
- Citations
- 16
- Most cited in
- 2015 (3)
- Field-weighted impact
- 0.81
- References
- 21
- Authors
- 4
Abstract
Ruthenium-promoted cobalt nanocatalysts that are supported by carbon nanotubes (CNTs) are prepared using impregnation and microemulsion techniques. Ruthenium loadings were varied from 0 to 1 wt% while the amount of cobalt was fixed at 15 wt%. The nanocatalysts were extensively characterized by different methods and their activity and selectivity in Fischer–Tropsch synthesis (FTS) have been assessed in a fixed-bed microreactor. The physicochemical properties and performance of the nanocatalysts were compared with the catalyst prepared by impregnation method. Very narrow particle size distribution has been produced by the microemulsion technique. According to the transmission electron microscopy, pictures small Co particles (2–7 nm) are mostly confined inside the CNTs. Ruthenium increased the percentage reduction of the unpromoted catalyst by a factor of 25. Compared with the catalysts prepared by impregnation, using microemulsion technique with water-to-surfactant ratio of 0.5 which decreased the average cobalt oxide particle sizes to 4.8 nm, the percentage of dispersion is almost doubled and the percentage of reduction is increased by 28. Addition of ruthenium increased the percentage conversion and C 5 + selectivity of the unpromoted catalyst by a factor of 22.6 and 7, respectively. Activity and selectivity were found to be dependent on the catalyst preparation method and water-to-surfactant ratio (as well as on cobalt particle sizes). The percentage of CO conversion and FTS rate increased from 59.09 to 75.05 and 0.291 to 0.372 g HC/g cat/h, respectively, while the C 5 + liquid hydrocarbons selectivity decreased slightly.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Tavasoli, A., Taghavi, S., Tabyar, S., & Karimi, S. (2014). Enhancement of ruthenium-promoted Co/CNT nanocatalyst performance using microemulsion technique. International Journal of Industrial Chemistry, 5(1), 1. https://doi.org/10.1007/s40090-014-0009-5
MLA 9
Tavasoli, Ahmad, et al. “Enhancement of ruthenium-promoted Co/CNT nanocatalyst performance using microemulsion technique.” International Journal of Industrial Chemistry, vol. 5, no. 1, 2014, p. 1. https://doi.org/10.1007/s40090-014-0009-5.
Chicago
Tavasoli, Ahmad, Somayeh Taghavi, Saber Tabyar, and Saba Karimi. 2014. “Enhancement of ruthenium-promoted Co/CNT nanocatalyst performance using microemulsion technique.” International Journal of Industrial Chemistry 5 (1): 1. https://doi.org/10.1007/s40090-014-0009-5.
Harvard
Tavasoli, A. et al. (2014) ‘Enhancement of ruthenium-promoted Co/CNT nanocatalyst performance using microemulsion technique’, International Journal of Industrial Chemistry, 5(1), p. 1. doi:10.1007/s40090-014-0009-5.
IEEE
A. Tavasoli, S. Taghavi, S. Tabyar, and S. Karimi, “Enhancement of ruthenium-promoted Co/CNT nanocatalyst performance using microemulsion technique,” International Journal of Industrial Chemistry, vol. 5, no. 1, p. 1, 2014, doi: 10.1007/s40090-014-0009-5.
BibTeX
@article{tavasoli2014enhancement,
title = {{Enhancement of ruthenium-promoted Co/CNT nanocatalyst performance using microemulsion technique}},
author = {Tavasoli, Ahmad and Taghavi, Somayeh and Tabyar, Saber and Karimi, Saba},
journal = {International Journal of Industrial Chemistry},
year = {2014},
volume = {5},
number = {1},
pages = {1},
doi = {10.1007/s40090-014-0009-5},
url = {https://doi.org/10.1007/s40090-014-0009-5}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2014 | 1 | |
| 2015 | 3 | |
| 2016 | 3 | |
| 2017 | 1 | |
| 2018 | 2 | |
| 2019 | 3 | |
| 2021 | 1 | |
| 2023 | 1 | |
| 2025 | 1 |
Its field-weighted citation impact is 0.81: it has been cited 0.81 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Chemical Engineering › Catalysis › Catalysts for Methane Reforming
- carbon nanotube-supported catalysts
- Fischer-Tropsch synthesis
- microemulsion synthesis
- impregnation method comparison
- cobalt particle size
- catalyst dispersion
- water-to-surfactant ratio
- CO conversion
Work with this paper
Most-cited papers in Chemical Engineering
- Viscoelastic Properties of PolymersJohn D. Ferry, Henry S. Myers · Journal of The Electrochemical Society · 1961 · 13,517 citations
- Chemical Reaction EngineeringOctave Levenspiel · Industrial & Engineering Chemistry Research · 1999 · 10,032 citations
- The theory of polymer dynamicsMasao Doi, Sam F Edwards · 1986 · 8,928 citations
- Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and EngineeringGeorge W. Huber, Sara Iborra, Avelino Corma · Chemical Reviews · 2006 · 7,825 citations
- Convective Transport in NanofluidsJacopo Buongiorno · ASME Journal of Heat and Mass Transfer · 2005 · 7,131 citations
Questions about this paper
How do I cite this paper in APA style?
Tavasoli, A., Taghavi, S., Tabyar, S., & Karimi, S. (2014). Enhancement of ruthenium-promoted Co/CNT nanocatalyst performance using microemulsion technique. International Journal of Industrial Chemistry, 5(1), 1. https://doi.org/10.1007/s40090-014-0009-5
How many times has this paper been cited?
16 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at International Journal of Industrial Chemistry.
Who wrote this paper?
Ahmad Tavasoli, Somayeh Taghavi, Saber Tabyar, Saba Karimi.
What is the DOI of this paper?
10.1007/s40090-014-0009-5. The permanent link is https://doi.org/10.1007/s40090-014-0009-5.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.