Journal article · 2024 · Open access
Enhanced Mechanical Properties of Lattice Structures Enabled by Tailoring Oblique Truss Orientation Angle
Advanced Engineering Materials, 26(6), 2301646 · Published 11 January 2024 · DOI 10.1002/adem.202301646
In brief
“Enhanced Mechanical Properties of Lattice Structures Enabled by Tailoring Oblique Truss Orientation Angle” is a 2024 journal article by Jiaxi Zhao and 6 co-authors, published in Advanced Engineering Materials. OpenAlex counts 23 citations as of 22 November 2026, which puts it in the top 6% of works published in 2024 by citations. It is open access: the full text is free to read at Advanced Engineering Materials.
- Citations
- 23
- Most cited in
- 2025 (11)
- Field-weighted impact
- 2.64
- References
- 60
- Authors
- 7
Abstract
The significant effect of the strut angle on the mechanical properties of strut‐based lattice structures is systematically explored through experimental and numerical investigations. The highest values of elastic modulus and yield strength, surpassing those observed in cubic lattices with the same relative density, have been experimentally observed at the strut angle of 71.76°. A correlation among elastic modulus, yield strength, and strut angles in lattices, validated by experimental tests, has been identified through developing a theoretical modelling and conducting a detailed finite element analysis. Transition from a bending dominated deformation mechanism to one dominated by compression within the lattice structures has been realized, contingent upon the tailoring of the strut angle. The deformation mechanism of these lattices is significantly influenced by the interplay between ductile bending and brittle failure of the struts. The superior energy absorption and yield strength demonstrated by the optimized lattice design have been underscored through a comparative analysis with other previously reported lattices. These lightweight structures hold promise for applications in the development of mechanical metamaterials with on‐demand mechanical properties.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Zhao, J., Liu, R., Cai, J. H., Estakhrianhaghighi, E., SASMITO, A. P., Hou, J., & Akbarzadeh, A. (2024). Enhanced Mechanical Properties of Lattice Structures Enabled by Tailoring Oblique Truss Orientation Angle. Advanced Engineering Materials, 26(6), 2301646. https://doi.org/10.1002/adem.202301646
MLA 9
Zhao, Jiaxi, et al. “Enhanced Mechanical Properties of Lattice Structures Enabled by Tailoring Oblique Truss Orientation Angle.” Advanced Engineering Materials, vol. 26, no. 6, 2024, p. 2301646. https://doi.org/10.1002/adem.202301646.
Chicago
Zhao, Jiaxi, Rui Liu, Jun Hua Cai, Ehsan Estakhrianhaghighi, AGUS PULUNG SASMITO, Jiwei Hou, and Abdolhamid Akbarzadeh. 2024. “Enhanced Mechanical Properties of Lattice Structures Enabled by Tailoring Oblique Truss Orientation Angle.” Advanced Engineering Materials 26 (6): 2301646. https://doi.org/10.1002/adem.202301646.
Harvard
Zhao, J. et al. (2024) ‘Enhanced Mechanical Properties of Lattice Structures Enabled by Tailoring Oblique Truss Orientation Angle’, Advanced Engineering Materials, 26(6), p. 2301646. doi:10.1002/adem.202301646.
IEEE
J. Zhao et al., “Enhanced Mechanical Properties of Lattice Structures Enabled by Tailoring Oblique Truss Orientation Angle,” Advanced Engineering Materials, vol. 26, no. 6, p. 2301646, 2024, doi: 10.1002/adem.202301646.
BibTeX
@article{zhao2024enhanced,
title = {{Enhanced Mechanical Properties of Lattice Structures Enabled by Tailoring Oblique Truss Orientation Angle}},
author = {Zhao, Jiaxi and Liu, Rui and Cai, Jun Hua and Estakhrianhaghighi, Ehsan and SASMITO, AGUS PULUNG and Hou, Jiwei and Akbarzadeh, Abdolhamid},
journal = {Advanced Engineering Materials},
year = {2024},
volume = {26},
number = {6},
pages = {2301646},
doi = {10.1002/adem.202301646},
url = {https://doi.org/10.1002/adem.202301646}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 3 | |
| 2025 | 11 | |
| 2026 | 9 |
Its field-weighted citation impact is 2.64: it has been cited 2.64 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
- lattice structures
- strut angle
- elastic modulus
- yield strength
- energy absorption
- deformation mechanisms
- brittle failure
- mechanical metamaterials
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Zhao, J., Liu, R., Cai, J. H., Estakhrianhaghighi, E., SASMITO, A. P., Hou, J., & Akbarzadeh, A. (2024). Enhanced Mechanical Properties of Lattice Structures Enabled by Tailoring Oblique Truss Orientation Angle. Advanced Engineering Materials, 26(6), 2301646. https://doi.org/10.1002/adem.202301646
How many times has this paper been cited?
23 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advanced Engineering Materials: sign in and open the PDF from this page.
Who wrote this paper?
Jiaxi Zhao, Rui Liu, Jun Hua Cai, Ehsan Estakhrianhaghighi, AGUS PULUNG SASMITO, Jiwei Hou, Abdolhamid Akbarzadeh.
What is the DOI of this paper?
10.1002/adem.202301646, permanently at https://doi.org/10.1002/adem.202301646. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.