Journal article · 2004 · Open access
Effects of Ti Interlayer on Mechanical Properties of TiN Film
Journal of the Society of Materials Science Japan, 53(3), 321–326 · Published 15 March 2004 · DOI 10.2472/jsms.53.321
In brief
“Effects of Ti Interlayer on Mechanical Properties of TiN Film” is a 2004 journal article by Hirotaka Tanabe and 3 co-authors, published in Journal of the Society of Materials Science Japan. OpenAlex counts 4 citations as of 17 November 2026. It is open access: the full text is free to read at Journal of the Society of Materials Science Japan.
- Citations
- 4
- Most cited in
- 2016 (1)
- Field-weighted impact
- 0.87
- References
- 3
- Authors
- 4
Abstract
A study on the effects of Ti interlayer on the characteristics of TiN films deposited by DC magnetron sputtering was carried out. Two type films, TiN/Ti bilayer film with Ti interlayer between S45C substrate and TiN film, and TiN monolayer film in which TiN film was deposited directly on the substrate, were prepared, and the micro-structure and the properties of these TiN films were compared. It was observed that the surface of TiN film became so smooth by depositing Ti interlayer. The adhesive strength of TiN/Ti bilayer film was larger than that of TiN monolayer film. It was confirmed Ti interlayer had the effect to improve the adhesive strength of TiN film. The residual stress of TiN/Ti bilayer film, which was thought to be introduced by bombardments of high-energy ions toward TiN film in coating process, was almost same as that of TiN monolayer film. Corresponding to it, hardness and toughness of TiN/Ti bilayer film were almost same as those of TiN monolayer film. Compared at relatively high bias voltage, the specific wear rate of TiN/Ti bilayer film was lower than that of TiN monolayer film. It was concluded that adhesive strength and specific wear rate were improved by using Ti interlayer without decreasing the other properties such as hardness and toughness.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Tanabe, H., Miyoshi, Y., TAKAMATSU, T., & Awano, H. (2004). Effects of Ti Interlayer on Mechanical Properties of TiN Film. Journal of the Society of Materials Science Japan, 53(3), 321–326. https://doi.org/10.2472/jsms.53.321
MLA 9
Tanabe, Hirotaka, et al. “Effects of Ti Interlayer on Mechanical Properties of TiN Film.” Journal of the Society of Materials Science Japan, vol. 53, no. 3, 2004, pp. 321–326. https://doi.org/10.2472/jsms.53.321.
Chicago
Tanabe, Hirotaka, Yoshio Miyoshi, Tohru TAKAMATSU, and Hitoshi Awano. 2004. “Effects of Ti Interlayer on Mechanical Properties of TiN Film.” Journal of the Society of Materials Science Japan 53 (3): 321–326. https://doi.org/10.2472/jsms.53.321.
Harvard
Tanabe, H. et al. (2004) ‘Effects of Ti Interlayer on Mechanical Properties of TiN Film’, Journal of the Society of Materials Science Japan, 53(3), pp. 321–326. doi:10.2472/jsms.53.321.
IEEE
H. Tanabe, Y. Miyoshi, T. TAKAMATSU, and H. Awano, “Effects of Ti Interlayer on Mechanical Properties of TiN Film,” Journal of the Society of Materials Science Japan, vol. 53, no. 3, pp. 321–326, 2004, doi: 10.2472/jsms.53.321.
BibTeX
@article{tanabe2004effects,
title = {{Effects of Ti Interlayer on Mechanical Properties of TiN Film}},
author = {Tanabe, Hirotaka and Miyoshi, Yoshio and TAKAMATSU, Tohru and Awano, Hitoshi},
journal = {Journal of the Society of Materials Science Japan},
year = {2004},
volume = {53},
number = {3},
pages = {321--326},
doi = {10.2472/jsms.53.321},
url = {https://doi.org/10.2472/jsms.53.321}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- TiN thin films
- Ti interlayer
- DC magnetron sputtering
- adhesion strength
- residual stress
- hardness
- toughness
- specific wear rate
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Tanabe, H., Miyoshi, Y., TAKAMATSU, T., & Awano, H. (2004). Effects of Ti Interlayer on Mechanical Properties of TiN Film. Journal of the Society of Materials Science Japan, 53(3), 321–326. https://doi.org/10.2472/jsms.53.321
How many times has this paper been cited?
4 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Journal of the Society of Materials Science Japan: sign in and open the PDF from this page.
Who wrote this paper?
Hirotaka Tanabe, Yoshio Miyoshi, Tohru TAKAMATSU, Hitoshi Awano.
What is the DOI of this paper?
10.2472/jsms.53.321, permanently at https://doi.org/10.2472/jsms.53.321. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.