Journal article · 2026 · Open access

Effects of Substrate Material, Surface Preparation, and Operating Conditions on the Surface Characteristics and Tribological Performance of MoS2 Dry Film Lubricants

Duval A. Johnson, Azhar Vellore, Ashlie Martini

Lubricants, 14(9), 355 · Published 17 September 2026 · DOI 10.3390/lubricants14090355

Open full textCite this paper

In brief

“Effects of Substrate Material, Surface Preparation, and Operating Conditions on the Surface Characteristics and Tribological Performance of MoS2 Dry Film Lubricants” is a 2026 journal article by Duval A. Johnson and 2 co-authors, published in Lubricants. OpenAlex counts 0 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Lubricants.

Citations
0
References
32
Authors
3

Abstract

Molybdenum disulfide (MoS2) dry film lubricants (DFLs) are widely used in aerospace mechanisms when conventional liquid lubricants are impractical. While the effects of environment on MoS2 are well established, the influence of substrate characteristics and operating conditions remains less understood. In this work, three commercial MoS2-based DFLs (Lube-Lok 4396, Everlube 620C, and Everlube 9002) were applied to five aerospace-relevant substrate materials and characterized in terms of surface roughness, flatness, coating thickness, friction, wear life, and load-carrying capacity. Vendor surface preparation and DFL deposition increased roughness, reduced flatness, and shifted the surface toward a more peak-dominated morphology, with the magnitude of these changes depending on both the substrate and coating. Tribological performance was evaluated for a subset of the samples which showed that friction was substantially lower in dry nitrogen than in ambient air, increasing contact pressure reduced friction, and sliding speed had little effect. Lube-Lok 4396 exhibited the longest wear life and highest load-carrying capacity, while Everlube 620C exhibited the lowest friction. Measured friction, wear life, and load-carrying capacity also differed from vendor specifications. These results highlight the effects of substrate material, surface preparation, and operating conditions on the surface characteristics and tribological performance of commercial MoS2 DFLs for aerospace applications.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Johnson, D. A., Vellore, A., & Martini, A. (2026). Effects of Substrate Material, Surface Preparation, and Operating Conditions on the Surface Characteristics and Tribological Performance of MoS2 Dry Film Lubricants. Lubricants, 14(9), 355. https://doi.org/10.3390/lubricants14090355

MLA 9

Johnson, Duval A., et al. “Effects of Substrate Material, Surface Preparation, and Operating Conditions on the Surface Characteristics and Tribological Performance of MoS2 Dry Film Lubricants.” Lubricants, vol. 14, no. 9, 2026, p. 355. https://doi.org/10.3390/lubricants14090355.

Chicago

Johnson, Duval A., Azhar Vellore, and Ashlie Martini. 2026. “Effects of Substrate Material, Surface Preparation, and Operating Conditions on the Surface Characteristics and Tribological Performance of MoS2 Dry Film Lubricants.” Lubricants 14 (9): 355. https://doi.org/10.3390/lubricants14090355.

Harvard

Johnson, D. A., Vellore, A. and Martini, A. (2026) ‘Effects of Substrate Material, Surface Preparation, and Operating Conditions on the Surface Characteristics and Tribological Performance of MoS2 Dry Film Lubricants’, Lubricants, 14(9), p. 355. doi:10.3390/lubricants14090355.

IEEE

D. A. Johnson, A. Vellore, and A. Martini, “Effects of Substrate Material, Surface Preparation, and Operating Conditions on the Surface Characteristics and Tribological Performance of MoS2 Dry Film Lubricants,” Lubricants, vol. 14, no. 9, p. 355, 2026, doi: 10.3390/lubricants14090355.

BibTeX

@article{johnson2026effects,
  title     = {{Effects of Substrate Material, Surface Preparation, and Operating Conditions on the Surface Characteristics and Tribological Performance of MoS2 Dry Film Lubricants}},
  author    = {Johnson, Duval A. and Vellore, Azhar and Martini, Ashlie},
  journal   = {Lubricants},
  year      = {2026},
  volume    = {14},
  number    = {9},
  pages     = {355},
  doi       = {10.3390/lubricants14090355},
  url       = {https://doi.org/10.3390/lubricants14090355}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives

  • MoS2
  • dry film lubricants
  • tribological properties
  • substrate materials
  • surface preparation
  • surface roughness
  • coating thickness
  • friction

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Johnson, D. A., Vellore, A., & Martini, A. (2026). Effects of Substrate Material, Surface Preparation, and Operating Conditions on the Surface Characteristics and Tribological Performance of MoS2 Dry Film Lubricants. Lubricants, 14(9), 355. https://doi.org/10.3390/lubricants14090355

How many times has this paper been cited?

0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Lubricants: sign in and open the full text from this page.

Who wrote this paper?

Duval A. Johnson, Azhar Vellore, Ashlie Martini.

What is the DOI of this paper?

10.3390/lubricants14090355, permanently at https://doi.org/10.3390/lubricants14090355. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.