Journal article · 2019 · Open access
Effects of Mn on Isothermal Transformation Microstructure and Tensile Properties in Medium- and High-carbon Steels
ISIJ International, 59(9), 1667–1675 · Published 14 September 2019 · DOI 10.2355/isijinternational.isijint-2019-022
In brief
“Effects of Mn on Isothermal Transformation Microstructure and Tensile Properties in Medium- and High-carbon Steels” is a 2019 journal article by Hayato Ishigami and 3 co-authors, published in ISIJ International. OpenAlex counts 16 citations as of 22 November 2026. It is open access: the full text is free to read at ISIJ International.
- Citations
- 16
- Most cited in
- 2025 (6)
- Field-weighted impact
- 0.53
- References
- 30
- Authors
- 4
Abstract
The effects of Mn addition on the microstructure formed through an isothermal transformation at 873 K and its tensile properties were investigated over a wide range of concentrations in medium- and high-carbon steels with 0.4–1.0 mass% C. The Mn addition changed the pearlite transformation mode from relatively slow non-partitioning pearlite with a small amount of proeutectoid ferrite to an extremely slow partitioning pearlite without any proeutectoid ferrite in the hypoeutectoid steel. The transformation rate of the partitioning pearlite associated with the Mn partitioning between ferrite and cementite in Fe–C–M alloy was more than three orders of magnitude lower than the pearlite transformation in Fe–C binary alloy at a given interlamellar spacing. The decrease in the transformation rate in the non-partitioning and partitioning pearlite transformation was caused by the decrease in the carbon flux controlling the pearlite transformation, which can be explained by the theory of local equilibrium at the austenite/ferrite and austenite/cementite interphases. The Mn addition increased the thermal stability of the lamellar cementite. Corresponding to the change in the transformation microstructure, the Mn addition improved the tensile properties in the pearlite steel, particularly the strength and local deformability balance, regardless of the difference in the transformation mode between the non-partitioning and the partitioning transformation, unless the proeutectoid cementite precipitated at prior austenite grain boundaries. The strength increase of the pearlite after the Mn addition was caused by the refinement of the interlamellar spacing and/or the increase of the lattice strain in the pearlitic ferrite.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Ishigami, H., Nakada, N., Kochi, T., & Nanba, S. (2019). Effects of Mn on Isothermal Transformation Microstructure and Tensile Properties in Medium- and High-carbon Steels. ISIJ International, 59(9), 1667–1675. https://doi.org/10.2355/isijinternational.isijint-2019-022
MLA 9
Ishigami, Hayato, et al. “Effects of Mn on Isothermal Transformation Microstructure and Tensile Properties in Medium- and High-carbon Steels.” ISIJ International, vol. 59, no. 9, 2019, pp. 1667–1675. https://doi.org/10.2355/isijinternational.isijint-2019-022.
Chicago
Ishigami, Hayato, Nobuo Nakada, Takuya Kochi, and Shigenobu Nanba. 2019. “Effects of Mn on Isothermal Transformation Microstructure and Tensile Properties in Medium- and High-carbon Steels.” ISIJ International 59 (9): 1667–1675. https://doi.org/10.2355/isijinternational.isijint-2019-022.
Harvard
Ishigami, H. et al. (2019) ‘Effects of Mn on Isothermal Transformation Microstructure and Tensile Properties in Medium- and High-carbon Steels’, ISIJ International, 59(9), pp. 1667–1675. doi:10.2355/isijinternational.isijint-2019-022.
IEEE
H. Ishigami, N. Nakada, T. Kochi, and S. Nanba, “Effects of Mn on Isothermal Transformation Microstructure and Tensile Properties in Medium- and High-carbon Steels,” ISIJ International, vol. 59, no. 9, pp. 1667–1675, 2019, doi: 10.2355/isijinternational.isijint-2019-022.
BibTeX
@article{ishigami2019effects,
title = {{Effects of Mn on Isothermal Transformation Microstructure and Tensile Properties in Medium- and High-carbon Steels}},
author = {Ishigami, Hayato and Nakada, Nobuo and Kochi, Takuya and Nanba, Shigenobu},
journal = {ISIJ International},
year = {2019},
volume = {59},
number = {9},
pages = {1667--1675},
doi = {10.2355/isijinternational.isijint-2019-022},
url = {https://doi.org/10.2355/isijinternational.isijint-2019-022}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2020 | 1 | |
| 2021 | 1 | |
| 2022 | 2 | |
| 2023 | 3 | |
| 2024 | 2 | |
| 2025 | 6 | |
| 2026 | 1 |
Its field-weighted citation impact is 0.53: it has been cited 0.53 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels
- manganese addition
- isothermal transformation
- pearlite transformation
- proeutectoid ferrite
- carbon flux
- interlamellar spacing
- tensile properties
- lattice strain
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Ishigami, H., Nakada, N., Kochi, T., & Nanba, S. (2019). Effects of Mn on Isothermal Transformation Microstructure and Tensile Properties in Medium- and High-carbon Steels. ISIJ International, 59(9), 1667–1675. https://doi.org/10.2355/isijinternational.isijint-2019-022
How many times has this paper been cited?
16 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at ISIJ International: sign in and open the PDF from this page.
Who wrote this paper?
Hayato Ishigami, Nobuo Nakada, Takuya Kochi, Shigenobu Nanba.
What is the DOI of this paper?
10.2355/isijinternational.isijint-2019-022, permanently at https://doi.org/10.2355/isijinternational.isijint-2019-022. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.