Journal article · 2019 · Open access
Effects of hard TiN under layer on mechanical properties and wear characteristics of TiN-WSx composite coating
Materials Research Express, 6(11), 116417 · Published 18 September 2019 · DOI 10.1088/2053-1591/ab44ec
In brief
“Effects of hard TiN under layer on mechanical properties and wear characteristics of TiN-WSx composite coating” is a 2019 journal article by Tushar Banerjee and A K Chattopadhyay, published in Materials Research Express. OpenAlex counts 5 citations as of 17 November 2026. It is open access: the full text is free to read at Materials Research Express.
- Citations
- 5
- Most cited in
- 2020 (3)
- Field-weighted impact
- 0.53
- References
- 23
- Authors
- 2
Abstract
Effect of hard TiN underlayer on mechanical and wear characteristics of TiN-WS x composite coating was studied. A mono layer TiN coating was also incorporated in the study as a reference. The coatings were synthesized with pulsed magnetron sputtering process. Structural properties were investigated with field emission scanning electron microscopy, energy dispersive spectroscopy, grazing incidence x-ray diffraction; mechanical properties with scratch adhesion test, nanoindentation test and finally tribological properties were studied with pin-on-disc test. TiN underlayer resulted in a more compact morphology of top TiN-WS x hard-lubricious layer. WS 2 phase with (002) orientation coexisted with crystalline TiN for TiN-WS x composite both with and without hard TiN underlayer. Scratch test revealed 35% increase in critical load of adhesion for TiN-WS x /TiN dual layer structure as compared to TiN monolayer. Brittle flaking of TiN along edges of scratch track also became negligible for dual layer coating owing to presence to soft WS x as well as presence of hard under layer which hindered substrate deformation during scratching. Low hardness of TiN-WS x as compared to TiN, partially recovered owing to addition of hard TiN underlayer. The dual layer coating also exhibited significantly low coefficient of friction of approximately 0.25–0.3 relative to 0.7–0.8 for TiN. The hard TiN underlayer reduced ploughing of top TiN-WS x composite layer. This in turn, resulted in low wear loss and subsequently less accumulation of wear debris at the leading edge of the counterbody.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Banerjee, T., & Chattopadhyay, A. K. (2019). Effects of hard TiN under layer on mechanical properties and wear characteristics of TiN-WSx composite coating. Materials Research Express, 6(11), 116417. https://doi.org/10.1088/2053-1591/ab44ec
MLA 9
Banerjee, Tushar, and A K Chattopadhyay. “Effects of hard TiN under layer on mechanical properties and wear characteristics of TiN-WSx composite coating.” Materials Research Express, vol. 6, no. 11, 2019, p. 116417. https://doi.org/10.1088/2053-1591/ab44ec.
Chicago
Banerjee, Tushar and A K Chattopadhyay. 2019. “Effects of hard TiN under layer on mechanical properties and wear characteristics of TiN-WSx composite coating.” Materials Research Express 6 (11): 116417. https://doi.org/10.1088/2053-1591/ab44ec.
Harvard
Banerjee, T. and Chattopadhyay, A. K. (2019) ‘Effects of hard TiN under layer on mechanical properties and wear characteristics of TiN-WSx composite coating’, Materials Research Express, 6(11), p. 116417. doi:10.1088/2053-1591/ab44ec.
IEEE
T. Banerjee and A. K. Chattopadhyay, “Effects of hard TiN under layer on mechanical properties and wear characteristics of TiN-WSx composite coating,” Materials Research Express, vol. 6, no. 11, p. 116417, 2019, doi: 10.1088/2053-1591/ab44ec.
BibTeX
@article{banerjee2019effects,
title = {{Effects of hard TiN under layer on mechanical properties and wear characteristics of TiN-WSx composite coating}},
author = {Banerjee, Tushar and Chattopadhyay, A K},
journal = {Materials Research Express},
year = {2019},
volume = {6},
number = {11},
pages = {116417},
doi = {10.1088/2053-1591/ab44ec},
url = {https://doi.org/10.1088/2053-1591/ab44ec}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2020 | 3 | |
| 2021 | 1 | |
| 2026 | 1 |
Its field-weighted citation impact is 0.53: it has been cited 0.53 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- tungsten disulfide
- double-layer coating
- pulsed magnetron sputtering
- coating adhesion
- scratch resistance
- nanohardness
- friction coefficient
- wear loss
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Banerjee, T., & Chattopadhyay, A. K. (2019). Effects of hard TiN under layer on mechanical properties and wear characteristics of TiN-WSx composite coating. Materials Research Express, 6(11), 116417. https://doi.org/10.1088/2053-1591/ab44ec
How many times has this paper been cited?
5 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Materials Research Express: sign in and open the PDF from this page.
Who wrote this paper?
Tushar Banerjee, A K Chattopadhyay.
What is the DOI of this paper?
10.1088/2053-1591/ab44ec, permanently at https://doi.org/10.1088/2053-1591/ab44ec. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.