Journal article · 2019 · Open access
Effects of Fluorine and Silicon Incorporation on Tribological Performance of Diamond-Like Carbon Films
Materials Sciences and Applications, 10(03), 170–185 · Published 1 January 2019 · DOI 10.4236/msa.2019.103014
In brief
“Effects of Fluorine and Silicon Incorporation on Tribological Performance of Diamond-Like Carbon Films” is a 2019 journal article by Chavin Jongwannasiri and 2 co-authors, published in Materials Sciences and Applications. OpenAlex counts 10 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials Sciences and Applications.
- Citations
- 10
- Most cited in
- 2023 (4)
- Field-weighted impact
- 0.54
- References
- 43
- Authors
- 3
Abstract
Diamond-like carbon (DLC) is a metastable amorphous film that exhibits unique properties. However, a number of limitations exist regarding the use of DLC, for instance, its tribological characteristics. In this article, the fluorine and silicon incorporated diamond-like carbon (F-DLC and Si-DLC) films are studied, taking into account the tribological properties of these films compared with pure DLC. The structures of the films were characterized using Auger electron spectroscopy and Raman spectroscopy. The hardness and elastic modulus were evaluated by nanoindentation hardness testing. The friction behavior was assessed using ball-on-disk friction testing and optical microscopy. The results indicated that the deposited DLC films contained 0.6 - 2.1 at.% F and 26.7 - 38.4 at.% Si. A decrease in the hardness and elastic modulus was obtained as F increased in content, which was the opposite of the behavior observed in the Si-DLC films. This was due to the shifting in the G-peak position, which is related to the sp3 bonding fraction in the film. When measured in ambient air, the addition of Si into the DLC film strongly influenced the friction coefficient, whereas doping with F only slightly influenced the films, as evidenced by their wear scars. In addition, only a 26.7 at.% Si-DLC film showed a very low friction coefficient when measured in dry air. This was attributed to the formation of silicon-rich transfer layer on the ball surfaces. Therefore, the addition of Si with 26.7 at.% content to a DLC film can be considered beneficial for improving tribological performance.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Jongwannasiri, C., Yoshida, S., & Watanabe, S. (2019). Effects of Fluorine and Silicon Incorporation on Tribological Performance of Diamond-Like Carbon Films. Materials Sciences and Applications, 10(03), 170–185. https://doi.org/10.4236/msa.2019.103014
MLA 9
Jongwannasiri, Chavin, et al. “Effects of Fluorine and Silicon Incorporation on Tribological Performance of Diamond-Like Carbon Films.” Materials Sciences and Applications, vol. 10, no. 03, 2019, pp. 170–185. https://doi.org/10.4236/msa.2019.103014.
Chicago
Jongwannasiri, Chavin, Satoshi Yoshida, and Shuichi Watanabe. 2019. “Effects of Fluorine and Silicon Incorporation on Tribological Performance of Diamond-Like Carbon Films.” Materials Sciences and Applications 10 (03): 170–185. https://doi.org/10.4236/msa.2019.103014.
Harvard
Jongwannasiri, C., Yoshida, S. and Watanabe, S. (2019) ‘Effects of Fluorine and Silicon Incorporation on Tribological Performance of Diamond-Like Carbon Films’, Materials Sciences and Applications, 10(03), pp. 170–185. doi:10.4236/msa.2019.103014.
IEEE
C. Jongwannasiri, S. Yoshida, and S. Watanabe, “Effects of Fluorine and Silicon Incorporation on Tribological Performance of Diamond-Like Carbon Films,” Materials Sciences and Applications, vol. 10, no. 03, pp. 170–185, 2019, doi: 10.4236/msa.2019.103014.
BibTeX
@article{jongwannasiri2019effects,
title = {{Effects of Fluorine and Silicon Incorporation on Tribological Performance of Diamond-Like Carbon Films}},
author = {Jongwannasiri, Chavin and Yoshida, Satoshi and Watanabe, Shuichi},
journal = {Materials Sciences and Applications},
year = {2019},
volume = {10},
number = {03},
pages = {170--185},
doi = {10.4236/msa.2019.103014},
url = {https://doi.org/10.4236/msa.2019.103014}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2021 | 3 | |
| 2022 | 2 | |
| 2023 | 4 | |
| 2024 | 1 |
Its field-weighted citation impact is 0.54: it has been cited 0.54 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- diamond-like carbon films
- fluorine doping
- silicon doping
- tribological properties
- friction coefficient
- hardness
- elastic modulus
- sp3 bonding fraction
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Jongwannasiri, C., Yoshida, S., & Watanabe, S. (2019). Effects of Fluorine and Silicon Incorporation on Tribological Performance of Diamond-Like Carbon Films. Materials Sciences and Applications, 10(03), 170–185. https://doi.org/10.4236/msa.2019.103014
How many times has this paper been cited?
10 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Materials Sciences and Applications: sign in and open the PDF from this page.
Who wrote this paper?
Chavin Jongwannasiri, Satoshi Yoshida, Shuichi Watanabe.
What is the DOI of this paper?
10.4236/msa.2019.103014, permanently at https://doi.org/10.4236/msa.2019.103014. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.