Journal article · 2018 · Open access

Effects of cutting parameters on surface roughness and hardness in milling of AISI 304 steel

Luís Wilfredo Hernández González, Roberto Pérez‐Rodríguez, Ana María Quesada Estrada, Luminita Dumitrescu

DYNA, 85(205), 57–63 · Published 1 April 2018 · DOI 10.15446/dyna.v85n205.64798

Open PDFView at the publisherCite this paper

In brief

“Effects of cutting parameters on surface roughness and hardness in milling of AISI 304 steel” is a 2018 journal article by Luís Wilfredo Hernández González and 3 co-authors, published in DYNA. OpenAlex counts 25 citations as of 22 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at DYNA.

Citations
25
Most cited in
2020 (9)
Field-weighted impact
1.94
References
18
Authors
4

Abstract

Este trabajo presenta un estudio experimental, en el fresado en seco del acero inoxidable austenítico AISI 304 con fresas de aleación dura, relacionado con la influencia del avance y de la velocidad de corte sobre la rugosidad superficial y la dureza. Los resultados muestran que, el maquinado provocó una disminución de la dureza de la pieza con relación a la pieza inicial, no obstante, el avance y la velocidad de corte no representaron efectos estadísticamente significativos para el nivel de confianza establecido. Los menores valores de rugosidad superficial se obtuvieron para las mayores velocidades de corte y para los menores avances, siendo la velocidad de corte el factor de mayor contribución. El modelo de regresión múltiple fue calculado y se comprobaron los requisitos para plantear que las variables están correlacionadas. Finalmente, se determinaron los parámetros de corte más adecuados utilizando el gráfico de contorno.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

González, L. W. H., Pérez‐Rodríguez, R., Estrada, A. M. Q., & Dumitrescu, L. (2018). Effects of cutting parameters on surface roughness and hardness in milling of AISI 304 steel. DYNA, 85(205), 57–63. https://doi.org/10.15446/dyna.v85n205.64798

MLA 9

González, Luís Wilfredo Hernández, et al. “Effects of cutting parameters on surface roughness and hardness in milling of AISI 304 steel.” DYNA, vol. 85, no. 205, 2018, pp. 57–63. https://doi.org/10.15446/dyna.v85n205.64798.

Chicago

González, Luís Wilfredo Hernández, Roberto Pérez‐Rodríguez, Ana María Quesada Estrada, and Luminita Dumitrescu. 2018. “Effects of cutting parameters on surface roughness and hardness in milling of AISI 304 steel.” DYNA 85 (205): 57–63. https://doi.org/10.15446/dyna.v85n205.64798.

Harvard

González, L. W. H. et al. (2018) ‘Effects of cutting parameters on surface roughness and hardness in milling of AISI 304 steel’, DYNA, 85(205), pp. 57–63. doi:10.15446/dyna.v85n205.64798.

IEEE

L. W. H. González, R. Pérez‐Rodríguez, A. M. Q. Estrada, and L. Dumitrescu, “Effects of cutting parameters on surface roughness and hardness in milling of AISI 304 steel,” DYNA, vol. 85, no. 205, pp. 57–63, 2018, doi: 10.15446/dyna.v85n205.64798.

BibTeX

@article{gonzalez2018effects,
  title     = {{Effects of cutting parameters on surface roughness and hardness in milling of AISI 304 steel}},
  author    = {González, Luís Wilfredo Hernández and Pérez‐Rodríguez, Roberto and Estrada, Ana María Quesada and Dumitrescu, Luminita},
  journal   = {DYNA},
  year      = {2018},
  volume    = {85},
  number    = {205},
  pages     = {57--63},
  doi       = {10.15446/dyna.v85n205.64798},
  url       = {https://doi.org/10.15446/dyna.v85n205.64798}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201922
202099
202122
202244
202333
202411
202522
202622

Its field-weighted citation impact is 1.94: it has been cited 1.94 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • 304 stainless steel
  • dry grinding
  • cutting parameters
  • surface roughness
  • hardness
  • feed rate
  • cutting speed
  • multiple regression model

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

González, L. W. H., Pérez‐Rodríguez, R., Estrada, A. M. Q., & Dumitrescu, L. (2018). Effects of cutting parameters on surface roughness and hardness in milling of AISI 304 steel. DYNA, 85(205), 57–63. https://doi.org/10.15446/dyna.v85n205.64798

How many times has this paper been cited?

25 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at DYNA: sign in and open the PDF from this page.

Who wrote this paper?

Luís Wilfredo Hernández González, Roberto Pérez‐Rodríguez, Ana María Quesada Estrada, Luminita Dumitrescu.

What is the DOI of this paper?

10.15446/dyna.v85n205.64798, permanently at https://doi.org/10.15446/dyna.v85n205.64798. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.