Journal article · 1995 · Open access

Effects of Cobalt Silicidation on the Electrical Characteristics of Shallow p+n Junctions Formed by BF 2 + Implantation into Thin Polycrystalline Si Films

C. T. Lin, C. H. Chao, M.H. Juang, S. T. Jan, P. F. Chou, H.C. Cheng

Journal of The Electrochemical Society, 142(3), 913–917 · Published 1 March 1995 · DOI 10.1149/1.2048557

Free PDFView at the publisherCite this paper

In brief

“Effects of Cobalt Silicidation on the Electrical Characteristics of Shallow p+n Junctions Formed by BF 2 + Implantation into Thin Polycrystalline Si Films” is a 1995 journal article by C. T. Lin and 5 co-authors, published in Journal of The Electrochemical Society. OpenAlex counts 4 citations as of 16 November 2026. It is open access: the full text is free to read at Journal of The Electrochemical Society.

Citations
4
Field-weighted impact
0.62
References
1
Authors
6

Abstract

Excellent shallow p + n junctions have been formed by implanting ions into thin polycrystalline Si films and subsequent annealing. The samples implanted at 50 keV to a dose show a leakage of 1 nA/cm 2 and a junction depth of about 0.05 μm after a 800°C annealing. To reduce the series resistances of the junctions, silicidation with different cobalt thickness was used to drive the as‐implanted dopants in the polysilicon films into the resultant junctions of the silicon substrates. For the low energy implantation at 50 keV at all dosages, silicidation can result in poor electrical characteristics due to the confinement of the dopants by the silicidation process. On the other hand, the electrical characteristics can be retained when a higher implantation energy of 100 keV with a dosage higher than was used. In addition, the samples implanted at 125 keV show poor electrical characteristics for the nonsilicided junctions but good characteristics after the silicidation. It is attributed to the enhanced defect annihilation by the formed silicide. Furthermore, silicided implanted through poly‐Si junctions with excellent characteristics can be fabricated after a low temperature (600°C) annealing if the samples are implanted at 100 keV with a dosage higher than .

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Lin, C. T., Chao, C. H., Juang, M., Jan, S. T., Chou, P. F., & Cheng, H. (1995). Effects of Cobalt Silicidation on the Electrical Characteristics of Shallow p+n Junctions Formed by BF 2 + Implantation into Thin Polycrystalline Si Films. Journal of The Electrochemical Society, 142(3), 913–917. https://doi.org/10.1149/1.2048557

MLA 9

Lin, C. T., et al. “Effects of Cobalt Silicidation on the Electrical Characteristics of Shallow p+n Junctions Formed by BF 2 + Implantation into Thin Polycrystalline Si Films.” Journal of The Electrochemical Society, vol. 142, no. 3, 1995, pp. 913–917. https://doi.org/10.1149/1.2048557.

Chicago

Lin, C. T., C. H. Chao, M.H. Juang, S. T. Jan, P. F. Chou, and H.C. Cheng. 1995. “Effects of Cobalt Silicidation on the Electrical Characteristics of Shallow p+n Junctions Formed by BF 2 + Implantation into Thin Polycrystalline Si Films.” Journal of The Electrochemical Society 142 (3): 913–917. https://doi.org/10.1149/1.2048557.

Harvard

Lin, C. T. et al. (1995) ‘Effects of Cobalt Silicidation on the Electrical Characteristics of Shallow p+n Junctions Formed by BF 2 + Implantation into Thin Polycrystalline Si Films’, Journal of The Electrochemical Society, 142(3), pp. 913–917. doi:10.1149/1.2048557.

IEEE

C. T. Lin, C. H. Chao, M. Juang, S. T. Jan, P. F. Chou, and H. Cheng, “Effects of Cobalt Silicidation on the Electrical Characteristics of Shallow p+n Junctions Formed by BF 2 + Implantation into Thin Polycrystalline Si Films,” Journal of The Electrochemical Society, vol. 142, no. 3, pp. 913–917, 1995, doi: 10.1149/1.2048557.

BibTeX

@article{lin1995effects,
  title     = {{Effects of Cobalt Silicidation on the Electrical Characteristics of Shallow p+n Junctions Formed by BF 2 + Implantation into Thin Polycrystalline Si Films}},
  author    = {Lin, C. T. and Chao, C. H. and Juang, M.H. and Jan, S. T. and Chou, P. F. and Cheng, H.C.},
  journal   = {Journal of The Electrochemical Society},
  year      = {1995},
  volume    = {142},
  number    = {3},
  pages     = {913--917},
  doi       = {10.1149/1.2048557},
  url       = {https://doi.org/10.1149/1.2048557}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Semiconductor materials and interfaces

  • shallow p-n junctions
  • polycrystalline silicon thin films
  • series resistance reduction
  • defect annihilation
  • low-temperature annealing
  • junction depth
  • leakage current

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Lin, C. T., Chao, C. H., Juang, M., Jan, S. T., Chou, P. F., & Cheng, H. (1995). Effects of Cobalt Silicidation on the Electrical Characteristics of Shallow p+n Junctions Formed by BF 2 + Implantation into Thin Polycrystalline Si Films. Journal of The Electrochemical Society, 142(3), 913–917. https://doi.org/10.1149/1.2048557

How many times has this paper been cited?

4 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Journal of The Electrochemical Society.

Who wrote this paper?

C. T. Lin, C. H. Chao, M.H. Juang, S. T. Jan, P. F. Chou, H.C. Cheng.

What is the DOI of this paper?

10.1149/1.2048557. The permanent link is https://doi.org/10.1149/1.2048557.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.