Journal article · 2012 · Open access

Effects of Austenitising Conditions on the Microstructures and Mechanical Properties of Martensitic Steel with Dual Matrix Structure

Kamilu Adeyemi Bello, S.B. Hassan, O. Aponbiede

Journal of Minerals and Materials Characterization and Engineering, 11(01), 69–83 · Published 1 January 2012 · DOI 10.4236/jmmce.2012.111006

Open PDFCite this paper

In brief

“Effects of Austenitising Conditions on the Microstructures and Mechanical Properties of Martensitic Steel with Dual Matrix Structure” is a 2012 journal article by Kamilu Adeyemi Bello and 2 co-authors, published in Journal of Minerals and Materials Characterization and Engineering. OpenAlex counts 7 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Journal of Minerals and Materials Characterization and Engineering.

Citations
7
Most cited in
2020 (2)
Field-weighted impact
0.48
References
7
Authors
3

Abstract

A new high strength steel with dual matrix structure and exceptionally high toughness plus ductility have been produced by intermediate quenching of 0.22_wt% C microalloyed steel.The treatment consisted of initial austenitization and rapid quenching of the steel samples to achieve a fully martensitic state followed by annealing in the intercritical (α+γ) region of 730 o C-810 o C for the period of 30, 60 and 90_minutes.These samples were subsequently quenched to obtain dual phase microstructure containing varying proportions of ferrite and martensite constituents.The mechanical properties of the samples were measured according to ASTM standard and their microstructures were analyzed by optical microscopy.The experimental results show that martensitic dual phase (MDP) steel samples developed within the intercritical temperature range of 770-790 o C revealed finer martensite and precipitatefree ferrite microstructure.The tensile and impact properties of the developed HMDP steels increased with intercritical annealing (ICA) temperatures, with an optimum properties obtained at 790 o C mainly due to finer microstructure of the constituent phases and absence of carbide precipitate that permit ease of dislocation flow.A further increase in the intercritical annealing temperature beyond 790 o C led to general decrease in the mechanical properties.This is attributed to the formation of coarse structure in this region.The results further show that with increasing intercritical treatment time from 30 to 90 minutes, the general mechanical properties of the MDP steels were found to increase except at the higher 70 K.A. Bello, S.B. Hassan Vol.11, No.1 temperature of 810 o C which showed decreasing values.In general, the tensile strengths and ductility as well as the impact properties of the developed dual phase steel samples are greatly improved with the intercritical heat treatment investigated.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Bello, K. A., Hassan, S., & Aponbiede, O. (2012). Effects of Austenitising Conditions on the Microstructures and Mechanical Properties of Martensitic Steel with Dual Matrix Structure. Journal of Minerals and Materials Characterization and Engineering, 11(01), 69–83. https://doi.org/10.4236/jmmce.2012.111006

MLA 9

Bello, Kamilu Adeyemi, et al. “Effects of Austenitising Conditions on the Microstructures and Mechanical Properties of Martensitic Steel with Dual Matrix Structure.” Journal of Minerals and Materials Characterization and Engineering, vol. 11, no. 01, 2012, pp. 69–83. https://doi.org/10.4236/jmmce.2012.111006.

Chicago

Bello, Kamilu Adeyemi, S.B. Hassan, and O. Aponbiede. 2012. “Effects of Austenitising Conditions on the Microstructures and Mechanical Properties of Martensitic Steel with Dual Matrix Structure.” Journal of Minerals and Materials Characterization and Engineering 11 (01): 69–83. https://doi.org/10.4236/jmmce.2012.111006.

Harvard

Bello, K. A., Hassan, S. and Aponbiede, O. (2012) ‘Effects of Austenitising Conditions on the Microstructures and Mechanical Properties of Martensitic Steel with Dual Matrix Structure’, Journal of Minerals and Materials Characterization and Engineering, 11(01), pp. 69–83. doi:10.4236/jmmce.2012.111006.

IEEE

K. A. Bello, S. Hassan, and O. Aponbiede, “Effects of Austenitising Conditions on the Microstructures and Mechanical Properties of Martensitic Steel with Dual Matrix Structure,” Journal of Minerals and Materials Characterization and Engineering, vol. 11, no. 01, pp. 69–83, 2012, doi: 10.4236/jmmce.2012.111006.

BibTeX

@article{bello2012effects,
  title     = {{Effects of Austenitising Conditions on the Microstructures and Mechanical Properties of Martensitic Steel with Dual Matrix Structure}},
  author    = {Bello, Kamilu Adeyemi and Hassan, S.B. and Aponbiede, O.},
  journal   = {Journal of Minerals and Materials Characterization and Engineering},
  year      = {2012},
  volume    = {11},
  number    = {01},
  pages     = {69--83},
  doi       = {10.4236/jmmce.2012.111006},
  url       = {https://doi.org/10.4236/jmmce.2012.111006}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201211
201811
202022
202311
202511
202611

Its field-weighted citation impact is 0.48: it has been cited 0.48 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels

  • austenitization
  • intercritical annealing
  • microalloyed steel
  • ferrite-martensite microstructure
  • tensile properties
  • impact toughness
  • ductility
  • dislocation flow

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Bello, K. A., Hassan, S., & Aponbiede, O. (2012). Effects of Austenitising Conditions on the Microstructures and Mechanical Properties of Martensitic Steel with Dual Matrix Structure. Journal of Minerals and Materials Characterization and Engineering, 11(01), 69–83. https://doi.org/10.4236/jmmce.2012.111006

How many times has this paper been cited?

7 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of Minerals and Materials Characterization and Engineering: sign in and open the PDF from this page.

Who wrote this paper?

Kamilu Adeyemi Bello, S.B. Hassan, O. Aponbiede.

What is the DOI of this paper?

10.4236/jmmce.2012.111006, permanently at https://doi.org/10.4236/jmmce.2012.111006. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.