Journal article · 2018 · Open access

Effects of Angle of Rotation of Submerged Entry Nozzle on Fluid Flows in a Square Billet Casting Mold

M. Mahdi Aboutalebi, Francis Lapointe, Julien D’amours, Mihaiela Minea Isac, R. I. L. Guthrie

JOM, 70(10), 2088–2095 · Published 1 June 2018 · DOI 10.1007/s11837-018-2938-5

Open PDFView at the publisherCite this paper

In brief

“Effects of Angle of Rotation of Submerged Entry Nozzle on Fluid Flows in a Square Billet Casting Mold” is a 2018 journal article by M. Mahdi Aboutalebi and 4 co-authors, published in JOM. OpenAlex counts 16 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at JOM.

Citations
16
Most cited in
2023 (4)
Field-weighted impact
0.31
References
17
Authors
5

Abstract

Having knowledge of fluid flows within the mold region of a billet continuous caster is of paramount importance to reduce a product’s internal and external defects. In this regard, a three-dimensional numerical model was developed to simulate the influence of the orientation of a five-port submerged entry nozzle (SEN) on the flow field of liquid steel within the mold region of a curved, square billet, continuous caster. The realizable k– $$ \epsilon $$ turbulence model, together with the volume of fluid multiphase model, was used to simulate the effects of turbulence on these fluid flows, and their impact on the liquefied mold powder layer sitting on top of the liquid steel within the mold. The behavior of flows generated in the mold cavity was validated against previous experimental work. The numerical results showed that the modified SEN’s horizontal angle of rotation can significantly change the flow pattern within the billet mold. These changes can stabilize the liquid steel meniscus, which is expected to improve the quality of continuously cast products by decreasing mold powder entrainment.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Aboutalebi, M. M., Lapointe, F., D’amours, J., Isac, M. M., & Guthrie, R. I. L. (2018). Effects of Angle of Rotation of Submerged Entry Nozzle on Fluid Flows in a Square Billet Casting Mold. JOM, 70(10), 2088–2095. https://doi.org/10.1007/s11837-018-2938-5

MLA 9

Aboutalebi, M. Mahdi, et al. “Effects of Angle of Rotation of Submerged Entry Nozzle on Fluid Flows in a Square Billet Casting Mold.” JOM, vol. 70, no. 10, 2018, pp. 2088–2095. https://doi.org/10.1007/s11837-018-2938-5.

Chicago

Aboutalebi, M. Mahdi, Francis Lapointe, Julien D’amours, Mihaiela Minea Isac, and R. I. L. Guthrie. 2018. “Effects of Angle of Rotation of Submerged Entry Nozzle on Fluid Flows in a Square Billet Casting Mold.” JOM 70 (10): 2088–2095. https://doi.org/10.1007/s11837-018-2938-5.

Harvard

Aboutalebi, M. M. et al. (2018) ‘Effects of Angle of Rotation of Submerged Entry Nozzle on Fluid Flows in a Square Billet Casting Mold’, JOM, 70(10), pp. 2088–2095. doi:10.1007/s11837-018-2938-5.

IEEE

M. M. Aboutalebi, F. Lapointe, J. D’amours, M. M. Isac, and R. I. L. Guthrie, “Effects of Angle of Rotation of Submerged Entry Nozzle on Fluid Flows in a Square Billet Casting Mold,” JOM, vol. 70, no. 10, pp. 2088–2095, 2018, doi: 10.1007/s11837-018-2938-5.

BibTeX

@article{aboutalebi2018effects,
  title     = {{Effects of Angle of Rotation of Submerged Entry Nozzle on Fluid Flows in a Square Billet Casting Mold}},
  author    = {Aboutalebi, M. Mahdi and Lapointe, Francis and D’amours, Julien and Isac, Mihaiela Minea and Guthrie, R. I. L.},
  journal   = {JOM},
  year      = {2018},
  volume    = {70},
  number    = {10},
  pages     = {2088--2095},
  doi       = {10.1007/s11837-018-2938-5},
  url       = {https://doi.org/10.1007/s11837-018-2938-5}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202011
202111
202222
202344
202422
202522
202644

Its field-weighted citation impact is 0.31: it has been cited 0.31 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics

  • submerged entry nozzle
  • billet continuous casting
  • mold flow field
  • liquid steel flow
  • meniscus stability
  • multiphase flow
  • turbulence modeling

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Aboutalebi, M. M., Lapointe, F., D’amours, J., Isac, M. M., & Guthrie, R. I. L. (2018). Effects of Angle of Rotation of Submerged Entry Nozzle on Fluid Flows in a Square Billet Casting Mold. JOM, 70(10), 2088–2095. https://doi.org/10.1007/s11837-018-2938-5

How many times has this paper been cited?

16 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at JOM: sign in and open the PDF from this page.

Who wrote this paper?

M. Mahdi Aboutalebi, Francis Lapointe, Julien D’amours, Mihaiela Minea Isac, R. I. L. Guthrie.

What is the DOI of this paper?

10.1007/s11837-018-2938-5, permanently at https://doi.org/10.1007/s11837-018-2938-5. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.