Journal article · 2011 · Open access

Effects of Ammonia/Methane Mixtures on Characteristics of Plasma Enhanced Chemical Vapor Deposition n-Type Carbon Films

Hsiang-Chun Hsueh, Huei-Cheng Li, Donyau Chiang, Sanboh Lee

Journal of The Electrochemical Society, 159(2), D77–D83 · Published 1 January 2011 · DOI 10.1149/2.051202jes

Free PDFView at the publisherCite this paper

In brief

“Effects of Ammonia/Methane Mixtures on Characteristics of Plasma Enhanced Chemical Vapor Deposition n-Type Carbon Films” is a 2011 journal article by Hsiang-Chun Hsueh and 3 co-authors, published in Journal of The Electrochemical Society. OpenAlex counts 11 citations as of 16 November 2026. It is open access: the full text is free to read at Journal of The Electrochemical Society.

Citations
11
Most cited in
2016 (4)
Field-weighted impact
0.14
References
54
Authors
4

Abstract

This study investigates the effect of ammonia/methane ( NH 3 / CH 4 ) mixtures on characteristics of nitrogen-doped amorphous hydrogenated carbon (a-C:H(N)) films prepared by plasma enhanced chemical vapor deposition. The a-C:H(N) films with identical thickness are deposited on p-type silicon (p-Si) substrates using different NH 3 / CH 4 ratios. These a-C:H(N)/p-Si junctions are a potential candidate to use in electronic or photoelectronic devices. The microstructures, optical properties, and mechanical properties of a-C:H(N) films are evaluated. Furthermore, the residual stresses in a-C:H(N)films, and also, the current density-voltage and capacitance density-voltage behaviors of a-C:H(N)/p-Si devices are investigated. Experimental results indicate that as the NH 3 / CH 4 ratio increases from 0 to 0.2, the nitrogen/carbon ratio increases from 0 to 5.4%. The nitrogen-carbon bonds, nitrogen-hydrogen bonds, and sp 2 carbon fraction of carbon films enlarge with increasing NH 3 / CH 4 ratio, while the deposition rate, ordered degree, optical band gap, reduced Young's modulus, hardness, and residual stress of carbon films decrease. The a:C:H(N)/p-Si device has an optimum electrical property at the NH 3 /CH 4 ratio of 0.15 (or at the N/C ratio of 4.7%). Finally, the results of this study are compared with those reported in literatures.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Hsueh, H.-C., Li, H.-C., Chiang, D., & Lee, S. (2011). Effects of Ammonia/Methane Mixtures on Characteristics of Plasma Enhanced Chemical Vapor Deposition n-Type Carbon Films. Journal of The Electrochemical Society, 159(2), D77–D83. https://doi.org/10.1149/2.051202jes

MLA 9

Hsueh, Hsiang-Chun, et al. “Effects of Ammonia/Methane Mixtures on Characteristics of Plasma Enhanced Chemical Vapor Deposition n-Type Carbon Films.” Journal of The Electrochemical Society, vol. 159, no. 2, 2011, pp. D77–D83. https://doi.org/10.1149/2.051202jes.

Chicago

Hsueh, Hsiang-Chun, Huei-Cheng Li, Donyau Chiang, and Sanboh Lee. 2011. “Effects of Ammonia/Methane Mixtures on Characteristics of Plasma Enhanced Chemical Vapor Deposition n-Type Carbon Films.” Journal of The Electrochemical Society 159 (2): D77–D83. https://doi.org/10.1149/2.051202jes.

Harvard

Hsueh, H.-C. et al. (2011) ‘Effects of Ammonia/Methane Mixtures on Characteristics of Plasma Enhanced Chemical Vapor Deposition n-Type Carbon Films’, Journal of The Electrochemical Society, 159(2), pp. D77–D83. doi:10.1149/2.051202jes.

IEEE

H.-C. Hsueh, H.-C. Li, D. Chiang, and S. Lee, “Effects of Ammonia/Methane Mixtures on Characteristics of Plasma Enhanced Chemical Vapor Deposition n-Type Carbon Films,” Journal of The Electrochemical Society, vol. 159, no. 2, pp. D77–D83, 2011, doi: 10.1149/2.051202jes.

BibTeX

@article{hsueh2011effects,
  title     = {{Effects of Ammonia/Methane Mixtures on Characteristics of Plasma Enhanced Chemical Vapor Deposition n-Type Carbon Films}},
  author    = {Hsueh, Hsiang-Chun and Li, Huei-Cheng and Chiang, Donyau and Lee, Sanboh},
  journal   = {Journal of The Electrochemical Society},
  year      = {2011},
  volume    = {159},
  number    = {2},
  pages     = {D77--D83},
  doi       = {10.1149/2.051202jes},
  url       = {https://doi.org/10.1149/2.051202jes}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201211
201511
201644
201811
202011
202311
202411
202511

Its field-weighted citation impact is 0.14: it has been cited 0.14 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Diamond and Carbon-based Materials Research

  • plasma-enhanced chemical vapor deposition
  • nitrogen to carbon ratio
  • optical band gap
  • residual stress
  • hardness
  • Young's modulus
  • current density-voltage characteristics
  • capacitance-voltage characteristics

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Hsueh, H.-C., Li, H.-C., Chiang, D., & Lee, S. (2011). Effects of Ammonia/Methane Mixtures on Characteristics of Plasma Enhanced Chemical Vapor Deposition n-Type Carbon Films. Journal of The Electrochemical Society, 159(2), D77–D83. https://doi.org/10.1149/2.051202jes

How many times has this paper been cited?

11 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Journal of The Electrochemical Society.

Who wrote this paper?

Hsiang-Chun Hsueh, Huei-Cheng Li, Donyau Chiang, Sanboh Lee.

What is the DOI of this paper?

10.1149/2.051202jes. The permanent link is https://doi.org/10.1149/2.051202jes.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.