Journal article · 2019 · Open access

Effect of Thermomechanical Treatment on Acicular Ferrite Formation in Ti–Ca Deoxidized Low Carbon Steel

Chao Wang, Xin Wang, Jian Kang, Guo Ding Yuan, Guodong Wang

Metals, 9(3), 296 · Published 6 March 2019 · DOI 10.3390/met9030296

Open PDFView at the publisherCite this paper

In brief

“Effect of Thermomechanical Treatment on Acicular Ferrite Formation in Ti–Ca Deoxidized Low Carbon Steel” is a 2019 journal article by Chao Wang and 4 co-authors, published in Metals. OpenAlex counts 20 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Metals.

Citations
20
Most cited in
2021 (4)
Field-weighted impact
1.33
References
29
Authors
5

Abstract

Transformation behaviors and mechanical properties under thermomechanical treatment conditions of Ti–Ca deoxidized low carbon steel were studied in comparison to Al–Ca treated steel. A thermomechanical simulation and a hot rolling experiment were carried out. Inclusions and microstructures were characterized, and the transformation mechanism was analyzed. The results indicated that typical inclusions in Ti–Ca deoxidized steel were TiOx-MnS-Al2O3-CaO, TiOx-MnO-Al2O3-CaO, and TiOx-MnS, which were effective for acicular ferrite (AF) nucleation. Acicular ferrite formation temperature decreased with an increase in cooling rate. A fine AF dominant microstructure was formed under a high driving force for the transformation from austenite to ferrite at lower temperatures. A high deformation of 43–65% discouraged the formation of acicular ferrite because of the increase in austenite grain boundaries serving as nucleation sites. The fraction of high-angled grain boundaries that acted as obstacles to cleavage cracks was the highest in the sample cooled at 5 °C/s because of full AF structure formation. The hardness increased significantly as the cooling rate increased from 2 to 15 °C/s, whereas it decreased under the condition of deformation because of the formation of (quasi-)polygonal ferrite. By applying accelerated water cooling, the mechanical properties, particularly impact toughness, were significantly improved as a result of fine AF microstructure formation.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Wang, C., Wang, X., Kang, J., Yuan, G. D., & Wang, G. (2019). Effect of Thermomechanical Treatment on Acicular Ferrite Formation in Ti–Ca Deoxidized Low Carbon Steel. Metals, 9(3), 296. https://doi.org/10.3390/met9030296

MLA 9

Wang, Chao, et al. “Effect of Thermomechanical Treatment on Acicular Ferrite Formation in Ti–Ca Deoxidized Low Carbon Steel.” Metals, vol. 9, no. 3, 2019, p. 296. https://doi.org/10.3390/met9030296.

Chicago

Wang, Chao, Xin Wang, Jian Kang, Guo Ding Yuan, and Guodong Wang. 2019. “Effect of Thermomechanical Treatment on Acicular Ferrite Formation in Ti–Ca Deoxidized Low Carbon Steel.” Metals 9 (3): 296. https://doi.org/10.3390/met9030296.

Harvard

Wang, C. et al. (2019) ‘Effect of Thermomechanical Treatment on Acicular Ferrite Formation in Ti–Ca Deoxidized Low Carbon Steel’, Metals, 9(3), p. 296. doi:10.3390/met9030296.

IEEE

C. Wang, X. Wang, J. Kang, G. D. Yuan, and G. Wang, “Effect of Thermomechanical Treatment on Acicular Ferrite Formation in Ti–Ca Deoxidized Low Carbon Steel,” Metals, vol. 9, no. 3, p. 296, 2019, doi: 10.3390/met9030296.

BibTeX

@article{wang2019effect,
  title     = {{Effect of Thermomechanical Treatment on Acicular Ferrite Formation in Ti–Ca Deoxidized Low Carbon Steel}},
  author    = {Wang, Chao and Wang, Xin and Kang, Jian and Yuan, Guo Ding and Wang, Guodong},
  journal   = {Metals},
  year      = {2019},
  volume    = {9},
  number    = {3},
  pages     = {296},
  doi       = {10.3390/met9030296},
  url       = {https://doi.org/10.3390/met9030296}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202033
202144
202233
202333
202433
202533
202611

Its field-weighted citation impact is 1.33: it has been cited 1.33 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels

  • acicular ferrite
  • mild steel
  • thermomechanical processing
  • hot rolling
  • inclusion
  • nucleation
  • cooling rate
  • austenite-to-ferrite transformation

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Wang, C., Wang, X., Kang, J., Yuan, G. D., & Wang, G. (2019). Effect of Thermomechanical Treatment on Acicular Ferrite Formation in Ti–Ca Deoxidized Low Carbon Steel. Metals, 9(3), 296. https://doi.org/10.3390/met9030296

How many times has this paper been cited?

20 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Metals: sign in and open the PDF from this page.

Who wrote this paper?

Chao Wang, Xin Wang, Jian Kang, Guo Ding Yuan, Guodong Wang.

What is the DOI of this paper?

10.3390/met9030296, permanently at https://doi.org/10.3390/met9030296. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.