Journal article · 2024 · Open access
Effect of Substrate Bias on the Structure and Tribological Performance of (AlTiVCrNb)CxNy Coatings Deposited via Graphite Co-Sputtering
Lubricants, 12(9), 325 · Published 23 September 2024 · DOI 10.3390/lubricants12090325
In brief
“Effect of Substrate Bias on the Structure and Tribological Performance of (AlTiVCrNb)CxNy Coatings Deposited via Graphite Co-Sputtering” is a 2024 journal article by Haichao Cai and 5 co-authors, published in Lubricants. OpenAlex counts 4 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Lubricants.
- Citations
- 4
- Most cited in
- 2025 (2)
- Field-weighted impact
- 0.51
- References
- 23
- Authors
- 6
Abstract
In the existing literature, there are few studies on the effect of deposition bias on the tribological properties of carbon-doped high-entropy alloy coatings. In order to further study the effect of the deposition bias on the properties of coatings, (AlTiVCrNb)CxNy coatings were deposited via unbalanced RF magnetron sputtering. The microstructure and tribological properties of carbon-doped high-entropy alloy ceramic coatings under different deposition biases were studied. The composition, morphology, crystal structure, and chemical morphology of each element of the coating were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The hardness, elastic modulus, friction, and wear properties of the coating were further characterized using a nanoindentation instrument, reciprocating sliding friction, a wear tester, and a white light interferometer. The coating density reached the optimal level when the deposition bias value was 90 V. The hardness and elastic modulus of the (AlTiVCrNb)CxNy coating increased first and then decreased with an increase in deposition bias, and the maximum hardness was 23.98 GPa. When the deposition bias was 90 V, the coating formed a good-quality carbon transfer film on the surface of the counterbody due to sp2 clusters during the friction and wear process. The average friction coefficient and wear rate of the (AlTiVCrNb)CxNy coating were the lowest, 0.185 and 1.6 × 10−7 mm3/N·m, respectively. The microstructure, mechanical properties, and tribological performance of the (AlTiVCrNb)CxNy coating were greatly affected by the change in deposition bias, and an (AlTiVCrNb)CxNy coating with excellent structure and friction properties could be prepared using graphite co-sputtering.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Cai, H., Guo, P., Xue, Y., Pei, L., Zhang, Y., & Ye, J. (2024). Effect of Substrate Bias on the Structure and Tribological Performance of (AlTiVCrNb)CxNy Coatings Deposited via Graphite Co-Sputtering. Lubricants, 12(9), 325. https://doi.org/10.3390/lubricants12090325
MLA 9
Cai, Haichao, et al. “Effect of Substrate Bias on the Structure and Tribological Performance of (AlTiVCrNb)CxNy Coatings Deposited via Graphite Co-Sputtering.” Lubricants, vol. 12, no. 9, 2024, p. 325. https://doi.org/10.3390/lubricants12090325.
Chicago
Cai, Haichao, Pengge Guo, Yujun Xue, Lulu Pei, Yinghao Zhang, and Jun Ye. 2024. “Effect of Substrate Bias on the Structure and Tribological Performance of (AlTiVCrNb)CxNy Coatings Deposited via Graphite Co-Sputtering.” Lubricants 12 (9): 325. https://doi.org/10.3390/lubricants12090325.
Harvard
Cai, H. et al. (2024) ‘Effect of Substrate Bias on the Structure and Tribological Performance of (AlTiVCrNb)CxNy Coatings Deposited via Graphite Co-Sputtering’, Lubricants, 12(9), p. 325. doi:10.3390/lubricants12090325.
IEEE
H. Cai, P. Guo, Y. Xue, L. Pei, Y. Zhang, and J. Ye, “Effect of Substrate Bias on the Structure and Tribological Performance of (AlTiVCrNb)CxNy Coatings Deposited via Graphite Co-Sputtering,” Lubricants, vol. 12, no. 9, p. 325, 2024, doi: 10.3390/lubricants12090325.
BibTeX
@article{cai2024effect,
title = {{Effect of Substrate Bias on the Structure and Tribological Performance of (AlTiVCrNb)CxNy Coatings Deposited via Graphite Co-Sputtering}},
author = {Cai, Haichao and Guo, Pengge and Xue, Yujun and Pei, Lulu and Zhang, Yinghao and Ye, Jun},
journal = {Lubricants},
year = {2024},
volume = {12},
number = {9},
pages = {325},
doi = {10.3390/lubricants12090325},
url = {https://doi.org/10.3390/lubricants12090325}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 1 | |
| 2025 | 2 | |
| 2026 | 1 |
Its field-weighted citation impact is 0.51: it has been cited 0.51 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › High Entropy Alloys Studies
- substrate bias
- ceramic coatings
- tribological properties
- friction coefficient
- wear rate
- hardness
- elastic modulus
- coating microstructure
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Cai, H., Guo, P., Xue, Y., Pei, L., Zhang, Y., & Ye, J. (2024). Effect of Substrate Bias on the Structure and Tribological Performance of (AlTiVCrNb)CxNy Coatings Deposited via Graphite Co-Sputtering. Lubricants, 12(9), 325. https://doi.org/10.3390/lubricants12090325
How many times has this paper been cited?
4 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Lubricants: sign in and open the full text from this page.
Who wrote this paper?
Haichao Cai, Pengge Guo, Yujun Xue, Lulu Pei, Yinghao Zhang, Jun Ye.
What is the DOI of this paper?
10.3390/lubricants12090325, permanently at https://doi.org/10.3390/lubricants12090325. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.