Conference paper · 2018 · Open access
Effect of sintering temperature on tribological properties of Ni60 matrix self-lubricating composites
IOP Conference Series Materials Science and Engineering, 382, 022063 · Published 1 July 2018 · DOI 10.1088/1757-899x/382/2/022063
In brief
“Effect of sintering temperature on tribological properties of Ni60 matrix self-lubricating composites” is a 2018 conference paper by Xue Li Cao and 2 co-authors, published in IOP Conference Series Materials Science and Engineering. OpenAlex counts 0 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at IOP Conference Series Materials Science and Engineering.
- Citations
- 0
- References
- 9
- Authors
- 3
Abstract
Ni60-based self-lubricating composites were prepared by vacuum sintering, and the tribological properties were evaluated against commercial Si 3 N 4 ball at room temperature. Apparently, the experimental results show that the prepared composites exhibit excellent lubricating properties at room temperature. The average friction coefficient of the samples is between 0.13 and 0.35 at different sintering temperatures. It can be found that as the sintering temperature increases, the wear rate decreases. Its hardness value showed an upward trend between 900°C and 1000°C, while the temperature achieves 1000°C, the hardness of the composite decreases, because the lubricating phases such as Sr 2 MoO 4 and Sr (CrO 4 ) were produced to increase the porosity.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Cao, X. L., Xiao, R. Z., & Bai, C. N. (2018). Effect of sintering temperature on tribological properties of Ni60 matrix self-lubricating composites. IOP Conference Series Materials Science and Engineering, 382, 022063. https://doi.org/10.1088/1757-899x/382/2/022063
MLA 9
Cao, Xue Li, et al. “Effect of sintering temperature on tribological properties of Ni60 matrix self-lubricating composites.” IOP Conference Series Materials Science and Engineering, vol. 382, 2018, p. 022063. https://doi.org/10.1088/1757-899x/382/2/022063.
Chicago
Cao, Xue Li, Rong Zhen Xiao, and Chang Ning Bai. 2018. “Effect of sintering temperature on tribological properties of Ni60 matrix self-lubricating composites.” IOP Conference Series Materials Science and Engineering 382: 022063. https://doi.org/10.1088/1757-899x/382/2/022063.
Harvard
Cao, X. L., Xiao, R. Z. and Bai, C. N. (2018) ‘Effect of sintering temperature on tribological properties of Ni60 matrix self-lubricating composites’, IOP Conference Series Materials Science and Engineering, 382, p. 022063. doi:10.1088/1757-899x/382/2/022063.
IEEE
X. L. Cao, R. Z. Xiao, and C. N. Bai, “Effect of sintering temperature on tribological properties of Ni60 matrix self-lubricating composites,” IOP Conference Series Materials Science and Engineering, vol. 382, p. 022063, 2018, doi: 10.1088/1757-899x/382/2/022063.
BibTeX
@inproceedings{cao2018effect,
title = {{Effect of sintering temperature on tribological properties of Ni60 matrix self-lubricating composites}},
author = {Cao, Xue Li and Xiao, Rong Zhen and Bai, Chang Ning},
booktitle = {IOP Conference Series Materials Science and Engineering},
year = {2018},
volume = {382},
pages = {022063},
doi = {10.1088/1757-899x/382/2/022063},
url = {https://doi.org/10.1088/1757-899x/382/2/022063}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Tribology and Wear Analysis
- self-lubricating composites
- sintering temperature
- tribological properties
- friction coefficient
- wear rate
- hardness
- porosity
- vacuum sintering
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Cao, X. L., Xiao, R. Z., & Bai, C. N. (2018). Effect of sintering temperature on tribological properties of Ni60 matrix self-lubricating composites. IOP Conference Series Materials Science and Engineering, 382, 022063. https://doi.org/10.1088/1757-899x/382/2/022063
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at IOP Conference Series Materials Science and Engineering: sign in and open the PDF from this page.
Who wrote this paper?
Xue Li Cao, Rong Zhen Xiao, Chang Ning Bai.
What is the DOI of this paper?
10.1088/1757-899x/382/2/022063, permanently at https://doi.org/10.1088/1757-899x/382/2/022063. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.