Journal article · 1954 · Open access

EFFECT OF SILICON ON THF PROPERTIES OF SHOCK-RESISTING TOOL STEEL

Naomichi Yamanaka, Kunio Kusaka

鐵と鋼 : 日本鐡鋼協會々誌, 40(10), 1001–1007 · Published 1 January 1954 · DOI 10.2355/tetsutohagane1915.40.10_1001

Open PDFView at the publisherCite this paper

In brief

“EFFECT OF SILICON ON THF PROPERTIES OF SHOCK-RESISTING TOOL STEEL” is a 1954 journal article by Naomichi Yamanaka and Kunio Kusaka, published in 鐵と鋼 : 日本鐡鋼協會々誌. OpenAlex counts 2 citations as of 22 November 2026, which puts it in the top 9% of works published in 1954 by citations. It is open access: the full text is free to read at 鐵と鋼 : 日本鐡鋼協會々誌.

Citations
2
Most cited in
2026 (1)
References
1
Authors
2

Abstract

To investigate the influence of silicon on the properties of shock-resisting steel containing 0.5% carbon. 1.5% chromium, 2.2% tungsten and 0.2% vanadium, the authors measured the critical point, the Jominy hardenability, the as-quenched and the as-tempered hardenss, the length-change during tempering, the specific gravity, and the mechanical properties.The results obtained are as follows:(1) Critical point is raised with the silicon content, and a full hardness 57 to 61 Rockwell C is obtained by oil-quenching from 900-960°C.(2) Hardenability is increased by addition of the silicon up to 0.78%, then decreased with more silicon addition. Steels containing 0.4% molybdenum posssess higher hardenability.(3) The rate of softening with tempering temperature decreases in the steels between 200 and 350°C, and the magnitude of this decreases in softening rate is related to the silicon contents of the steels. In fact, the rate of softening becomes nil at about 300°C in the steels which contain 1% or more silicon.(4) The quantity of the retained austenite measured by saturation permeameter increases slightly with the silicon content and quenching temperature. And the transformation of the retained austenite is retarded as the silicon content increases.(5) From the results of dilatometer test, it was found that the temperature at which the third stage contraction can be detected is raised with the silicon content, and the temperature range over which the contraction occured is greater in lower silicon steel.(6) The specific gravity of the 1% or more silicon steel does not decrease appreciably with 1-hour tempers at increasing tempering temperatures, between 200 and 350°C.(7) Yield strength measured by tensil test and bend test is incresed. with the silicon, up to 0.8% and then slightly decreased with more silicon content. Hot hardness and tensile strength at 400°C increase with the silicon content.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Yamanaka, N., & Kusaka, K. (1954). EFFECT OF SILICON ON THF PROPERTIES OF SHOCK-RESISTING TOOL STEEL. 鐵と鋼 : 日本鐡鋼協會々誌, 40(10), 1001–1007. https://doi.org/10.2355/tetsutohagane1915.40.10_1001

MLA 9

Yamanaka, Naomichi, and Kunio Kusaka. “EFFECT OF SILICON ON THF PROPERTIES OF SHOCK-RESISTING TOOL STEEL.” 鐵と鋼 : 日本鐡鋼協會々誌, vol. 40, no. 10, 1954, pp. 1001–1007. https://doi.org/10.2355/tetsutohagane1915.40.10_1001.

Chicago

Yamanaka, Naomichi and Kunio Kusaka. 1954. “EFFECT OF SILICON ON THF PROPERTIES OF SHOCK-RESISTING TOOL STEEL.” 鐵と鋼 : 日本鐡鋼協會々誌 40 (10): 1001–1007. https://doi.org/10.2355/tetsutohagane1915.40.10_1001.

Harvard

Yamanaka, N. and Kusaka, K. (1954) ‘EFFECT OF SILICON ON THF PROPERTIES OF SHOCK-RESISTING TOOL STEEL’, 鐵と鋼 : 日本鐡鋼協會々誌, 40(10), pp. 1001–1007. doi:10.2355/tetsutohagane1915.40.10_1001.

IEEE

N. Yamanaka and K. Kusaka, “EFFECT OF SILICON ON THF PROPERTIES OF SHOCK-RESISTING TOOL STEEL,” 鐵と鋼 : 日本鐡鋼協會々誌, vol. 40, no. 10, pp. 1001–1007, 1954, doi: 10.2355/tetsutohagane1915.40.10_1001.

BibTeX

@article{yamanaka1954effect,
  title     = {{EFFECT OF SILICON ON THF PROPERTIES OF SHOCK-RESISTING TOOL STEEL}},
  author    = {Yamanaka, Naomichi and Kusaka, Kunio},
  journal   = {鐵と鋼 : 日本鐡鋼協會々誌},
  year      = {1954},
  volume    = {40},
  number    = {10},
  pages     = {1001--1007},
  doi       = {10.2355/tetsutohagane1915.40.10_1001},
  url       = {https://doi.org/10.2355/tetsutohagane1915.40.10_1001}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Metals and Alloys › Metal Alloys Wear and Properties

  • silicon
  • high-speed steel
  • hardenability
  • critical points
  • retained austenite
  • dilatometry
  • relative density
  • yield strength

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Yamanaka, N., & Kusaka, K. (1954). EFFECT OF SILICON ON THF PROPERTIES OF SHOCK-RESISTING TOOL STEEL. 鐵と鋼 : 日本鐡鋼協會々誌, 40(10), 1001–1007. https://doi.org/10.2355/tetsutohagane1915.40.10_1001

How many times has this paper been cited?

2 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at 鐵と鋼 : 日本鐡鋼協會々誌: sign in and open the PDF from this page.

Who wrote this paper?

Naomichi Yamanaka, Kunio Kusaka.

What is the DOI of this paper?

10.2355/tetsutohagane1915.40.10_1001, permanently at https://doi.org/10.2355/tetsutohagane1915.40.10_1001. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.