Journal article · 2020 · Open access

Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys

Dohyoung Kim, Yong Hwan Kim, Jeong-Jung Oak, Junghoon Lee, Chan Hee Park, Wookjin Lee, Yong‐Ho Park

대한금속재료학회지, 58(10), 660–671 · Published 5 October 2020 · DOI 10.3365/kjmm.2020.58.10.660

Open PDFView at the publisherCite this paper

In brief

“Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys” is a 2020 journal article by Dohyoung Kim and 6 co-authors, published in 대한금속재료학회지. OpenAlex counts 9 citations as of 22 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at 대한금속재료학회지.

Citations
9
Most cited in
2021 (3)
Field-weighted impact
0.61
References
36
Authors
7

Abstract

Fe-Mn-Si based shape memory alloy is a new functional material that can be used to apply prestress to civil and structural components such as concrete structures. In this study, the effects of alloying elements Ni, C and Ti on the mechanical and shape memory properties of the alloy were investigated in detail using a base alloy composition of Fe-17Mn-5Si-5Cr (wt%). Enhanced shape recovery ratio and decreasing strength were observed in the alloy when 4 wt% Ni was added. With the further addition of 0.05 wt% C, the alloy showed even higher shape recovery behavior, although the mechanical strength was lowered by the C addition. Increasing the carbon content up to 0.1 wt% led to higher mechanical strength while the shape recovery ratio was decreased slightly. It was shown that the addition of 1 wt% Ti can significantly enhance the shape recovery behavior of the alloy. The recovery behavior of the alloy with the co-addition of 0.3 wt% C and 1 wt% Ti was similar to the alloy without Ti but containing 0.1 wt% C, even though the C content was significantly higher. The alloy with the co-addition of 0.3 wt% C and 1 wt% Ti has great potential as functional components in prestressed civil engineering structures, since the yield strength of the alloy is as high as 400 MPa in the solution heat treated condition and can be further improved by aging heat treatments, which precipitate TiC particles.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Kim, D., Kim, Y. H., Oak, J.-J., Lee, J., Park, C. H., Lee, W., & Park, Y. (2020). Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys. 대한금속재료학회지, 58(10), 660–671. https://doi.org/10.3365/kjmm.2020.58.10.660

MLA 9

Kim, Dohyoung, et al. “Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys.” 대한금속재료학회지, vol. 58, no. 10, 2020, pp. 660–671. https://doi.org/10.3365/kjmm.2020.58.10.660.

Chicago

Kim, Dohyoung, Yong Hwan Kim, Jeong-Jung Oak, Junghoon Lee, Chan Hee Park, Wookjin Lee, and Yong‐Ho Park. 2020. “Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys.” 대한금속재료학회지 58 (10): 660–671. https://doi.org/10.3365/kjmm.2020.58.10.660.

Harvard

Kim, D. et al. (2020) ‘Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys’, 대한금속재료학회지, 58(10), pp. 660–671. doi:10.3365/kjmm.2020.58.10.660.

IEEE

D. Kim et al., “Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys,” 대한금속재료학회지, vol. 58, no. 10, pp. 660–671, 2020, doi: 10.3365/kjmm.2020.58.10.660.

BibTeX

@article{kim2020effect,
  title     = {{Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys}},
  author    = {Kim, Dohyoung and Kim, Yong Hwan and Oak, Jeong-Jung and Lee, Junghoon and Park, Chan Hee and Lee, Wookjin and Park, Yong‐Ho},
  journal   = {대한금속재료학회지},
  year      = {2020},
  volume    = {58},
  number    = {10},
  pages     = {660--671},
  doi       = {10.3365/kjmm.2020.58.10.660},
  url       = {https://doi.org/10.3365/kjmm.2020.58.10.660}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202011
202133
202222
202311
202411
202511

Its field-weighted citation impact is 0.61: it has been cited 0.61 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • Fe-Mn-Si shape memory alloy
  • nickel addition
  • carbon addition
  • titanium addition
  • shape recovery ratio
  • mechanical properties
  • yield strength
  • prestressed concrete structures

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Kim, D., Kim, Y. H., Oak, J.-J., Lee, J., Park, C. H., Lee, W., & Park, Y. (2020). Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys. 대한금속재료학회지, 58(10), 660–671. https://doi.org/10.3365/kjmm.2020.58.10.660

How many times has this paper been cited?

9 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at 대한금속재료학회지: sign in and open the PDF from this page.

Who wrote this paper?

Dohyoung Kim, Yong Hwan Kim, Jeong-Jung Oak, Junghoon Lee, Chan Hee Park, Wookjin Lee, Yong‐Ho Park.

What is the DOI of this paper?

10.3365/kjmm.2020.58.10.660, permanently at https://doi.org/10.3365/kjmm.2020.58.10.660. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.