Journal article · 2018 · Open access

Effect of molybdenum additions on the microstructures and corrosion behaviours of 316L stainless steel-based alloys

T. Rahman, William L. Ebert, J. E. Indacochea

Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, 53(3), 226–233 · Published 28 February 2018 · DOI 10.1080/1478422x.2018.1443991

Open PDFView at the publisherCite this paper

In brief

“Effect of molybdenum additions on the microstructures and corrosion behaviours of 316L stainless steel-based alloys” is a 2018 journal article by T. Rahman and 2 co-authors, published in Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control. OpenAlex counts 25 citations as of 22 November 2026, which puts it in the top 8% of works published in 2018 by citations. It is open access: the full text is free to read at OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information).

Citations
25
Most cited in
2025 (8)
Field-weighted impact
0.77
References
9
Authors
3

Abstract

Alloys were made by alloying 5, 10, 15, 17.5 and 20 wt-% Mo with Type 316L stainless steel. Sigma phases containing 21–29 wt-% Mo formed along the austenite grain boundaries with the addition of 5 wt-% Mo and increased with additions up to 15 wt-% Mo, but they decreased with further additions. Laves phases containing 33–40 wt-% Mo co-precipitated at additions of 10 wt-% Mo which increased with further Mo increases. The corrosion resistance, assessed by potentiodynamic polarisation in a 10 mM NaCl solution adjusted to pH 4, increased relative to Type 316L for alloys made with 5 and 10 wt-% added Mo, but decreased with further additions due to preferential corrosion of the Laves phase. The alloy made with 10 wt-% added Mo had the highest corrosion resistance due primarily to the high Mo content of the austenite.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Rahman, T., Ebert, W. L., & Indacochea, J. E. (2018). Effect of molybdenum additions on the microstructures and corrosion behaviours of 316L stainless steel-based alloys. Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, 53(3), 226–233. https://doi.org/10.1080/1478422x.2018.1443991

MLA 9

Rahman, T., et al. “Effect of molybdenum additions on the microstructures and corrosion behaviours of 316L stainless steel-based alloys.” Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, vol. 53, no. 3, 2018, pp. 226–233. https://doi.org/10.1080/1478422x.2018.1443991.

Chicago

Rahman, T., William L. Ebert, and J. E. Indacochea. 2018. “Effect of molybdenum additions on the microstructures and corrosion behaviours of 316L stainless steel-based alloys.” Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control 53 (3): 226–233. https://doi.org/10.1080/1478422x.2018.1443991.

Harvard

Rahman, T., Ebert, W. L. and Indacochea, J. E. (2018) ‘Effect of molybdenum additions on the microstructures and corrosion behaviours of 316L stainless steel-based alloys’, Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, 53(3), pp. 226–233. doi:10.1080/1478422x.2018.1443991.

IEEE

T. Rahman, W. L. Ebert, and J. E. Indacochea, “Effect of molybdenum additions on the microstructures and corrosion behaviours of 316L stainless steel-based alloys,” Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, vol. 53, no. 3, pp. 226–233, 2018, doi: 10.1080/1478422x.2018.1443991.

BibTeX

@article{rahman2018effect,
  title     = {{Effect of molybdenum additions on the microstructures and corrosion behaviours of 316L stainless steel-based alloys}},
  author    = {Rahman, T. and Ebert, William L. and Indacochea, J. E.},
  journal   = {Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control},
  year      = {2018},
  volume    = {53},
  number    = {3},
  pages     = {226--233},
  doi       = {10.1080/1478422x.2018.1443991},
  url       = {https://doi.org/10.1080/1478422x.2018.1443991}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202155
202266
202322
202588
202644

Its field-weighted citation impact is 0.77: it has been cited 0.77 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Metals and Alloys › Hydrogen embrittlement and corrosion behaviors in metals

  • molybdenum addition
  • 316L stainless steel
  • sigma phase
  • Laves phase
  • microstructure
  • corrosion resistance
  • chloride-induced corrosion
  • grain boundary precipitates

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Rahman, T., Ebert, W. L., & Indacochea, J. E. (2018). Effect of molybdenum additions on the microstructures and corrosion behaviours of 316L stainless steel-based alloys. Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, 53(3), 226–233. https://doi.org/10.1080/1478422x.2018.1443991

How many times has this paper been cited?

25 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information): sign in and open the PDF from this page.

Who wrote this paper?

T. Rahman, William L. Ebert, J. E. Indacochea.

What is the DOI of this paper?

10.1080/1478422x.2018.1443991, permanently at https://doi.org/10.1080/1478422x.2018.1443991. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.