Journal article · 2022 · Open access
Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys
Journal of Thermal Analysis and Calorimetry, 148(4), 1567–1576 · Published 6 October 2022 · DOI 10.1007/s10973-022-11664-2
In brief
“Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys” is a 2022 journal article by Mateusz Morawiec and 4 co-authors, published in Journal of Thermal Analysis and Calorimetry. OpenAlex counts 30 citations as of 22 November 2026, which puts it in the top 8% of works published in 2022 by citations. It is open access under a CC BY licence: the full text is free to read at Journal of Thermal Analysis and Calorimetry.
- Citations
- 30
- Most cited in
- 2026 (13)
- Field-weighted impact
- 1.51
- References
- 26
- Authors
- 5
Abstract
This work presents insights into the manganese influence on the driving force and bainite transformation kinetics. Three different medium-Mn steels were subjected to theoretical calculations and dilatometric study in order to determine the Mn impact on bainite formation. The theoretical approach shows that the increase of manganese leads to a lower bainite fraction formed during the isothermal stage. This implicates the carbon enrichment of the austenite during thermal treatment. The less bainite is formed, the higher is the fraction of residual austenite which enrichment of carbon is globally low. Meanwhile, the manganese influences the incubation and transformation time. As the manganese content increases, the incubation period and formation time of bainite are longer because the chemical driving force essential to start and complete austenite into bainite transformation decreases. This was proved by theoretical calculations and dilatometric analysis, which show that even a small increase in manganese content leads to a longer time necessary to occur the bainitic transformation. For the steel containing 5% manganese, the driving force was too small that the transformation could occur even after 3 h. Additionally, the XRD analysis was conducted to determine the retained austenite fraction and its carbon enrichment. These results were compared with the theoretical values to determine the accuracy of the applied model.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Morawiec, M., Opara, J., García-Mateo, C., Jiménez, J. A., & Grajcar, A. (2022). Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys. Journal of Thermal Analysis and Calorimetry, 148(4), 1567–1576. https://doi.org/10.1007/s10973-022-11664-2
MLA 9
Morawiec, Mateusz, et al. “Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys.” Journal of Thermal Analysis and Calorimetry, vol. 148, no. 4, 2022, pp. 1567–1576. https://doi.org/10.1007/s10973-022-11664-2.
Chicago
Morawiec, Mateusz, Jarosław Opara, Carlos García-Mateo, José Antonio Jiménez, and Adam Grajcar. 2022. “Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys.” Journal of Thermal Analysis and Calorimetry 148 (4): 1567–1576. https://doi.org/10.1007/s10973-022-11664-2.
Harvard
Morawiec, M. et al. (2022) ‘Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys’, Journal of Thermal Analysis and Calorimetry, 148(4), pp. 1567–1576. doi:10.1007/s10973-022-11664-2.
IEEE
M. Morawiec, J. Opara, C. García-Mateo, J. A. Jiménez, and A. Grajcar, “Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys,” Journal of Thermal Analysis and Calorimetry, vol. 148, no. 4, pp. 1567–1576, 2022, doi: 10.1007/s10973-022-11664-2.
BibTeX
@article{morawiec2022effect,
title = {{Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys}},
author = {Morawiec, Mateusz and Opara, Jarosław and García-Mateo, Carlos and Jiménez, José Antonio and Grajcar, Adam},
journal = {Journal of Thermal Analysis and Calorimetry},
year = {2022},
volume = {148},
number = {4},
pages = {1567--1576},
doi = {10.1007/s10973-022-11664-2},
url = {https://doi.org/10.1007/s10973-022-11664-2}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2023 | 2 | |
| 2024 | 9 | |
| 2025 | 6 | |
| 2026 | 13 |
Its field-weighted citation impact is 1.51: it has been cited 1.51 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels
- medium manganese steel
- bainite transformation
- transformation kinetics
- chemical driving force
- manganese content
- retained austenite
- isothermal transformation
- dilatometry
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Morawiec, M., Opara, J., García-Mateo, C., Jiménez, J. A., & Grajcar, A. (2022). Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys. Journal of Thermal Analysis and Calorimetry, 148(4), 1567–1576. https://doi.org/10.1007/s10973-022-11664-2
How many times has this paper been cited?
30 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Journal of Thermal Analysis and Calorimetry: sign in and open the PDF from this page.
Who wrote this paper?
Mateusz Morawiec, Jarosław Opara, Carlos García-Mateo, José Antonio Jiménez, Adam Grajcar.
What is the DOI of this paper?
10.1007/s10973-022-11664-2, permanently at https://doi.org/10.1007/s10973-022-11664-2. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.