Journal article · 2023 · Open access
Effect of Microstructure of TiN /TiCN Layer on the Structural, Mechanical and Tribological Properties of the Ti/TiN/TiCN Films
Lubricants, 11(1), 21 · Published 5 January 2023 · DOI 10.3390/lubricants11010021
In brief
“Effect of Microstructure of TiN /TiCN Layer on the Structural, Mechanical and Tribological Properties of the Ti/TiN/TiCN Films” is a 2023 journal article by Yanhong Lyu and 5 co-authors, published in Lubricants. OpenAlex counts 9 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Lubricants.
- Citations
- 9
- Most cited in
- 2026 (7)
- Field-weighted impact
- 0.80
- References
- 38
- Authors
- 6
Abstract
A direct current magnetron sputtering (DCMS) system at room temperature was applied to deposit the Ti/TiN/TiCN films. In order to research the effect of the microstructure of the TiN/TiCN layer on the Ti/TiN/TiCN films, the deposition time ratio of the TiN/TiCN layer ranged from 28.57 to 200%, and the whole deposition time of the films and the deposition time of Ti layer were constant. In this work, the relationship between structure and mechanical properties of films were investigated. The research results showed that the composition and structure of the films only slightly changed, while the crystalline orientation of the TiCN layer was of significant variation with the deposition time of the TiN layer. It is shown that the adhesion strength and internal stresses were 18.6 ± 1.5 N and 140 MPa when the deposition time ratio was 50%. By adjusting the deposition time ratio, the films displayed significant improvement in tribological behaviors. The coefficients of friction (COF) for the films deposited under deposition time ratio of 50% were about only 0.139 when the value of COF was stabilized. This work can provide a good wear-resisting film prepared approach at room temperature.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Lyu, Y., Zhang, Q., Liu, Y., Deng, X., Sun, H., & Mo, M. (2023). Effect of Microstructure of TiN /TiCN Layer on the Structural, Mechanical and Tribological Properties of the Ti/TiN/TiCN Films. Lubricants, 11(1), 21. https://doi.org/10.3390/lubricants11010021
MLA 9
Lyu, Yanhong, et al. “Effect of Microstructure of TiN /TiCN Layer on the Structural, Mechanical and Tribological Properties of the Ti/TiN/TiCN Films.” Lubricants, vol. 11, no. 1, 2023, p. 21. https://doi.org/10.3390/lubricants11010021.
Chicago
Lyu, Yanhong, Qiaoyu Zhang, Yang Liu, Xinrong Deng, Huilian Sun, and Min Mo. 2023. “Effect of Microstructure of TiN /TiCN Layer on the Structural, Mechanical and Tribological Properties of the Ti/TiN/TiCN Films.” Lubricants 11 (1): 21. https://doi.org/10.3390/lubricants11010021.
Harvard
Lyu, Y. et al. (2023) ‘Effect of Microstructure of TiN /TiCN Layer on the Structural, Mechanical and Tribological Properties of the Ti/TiN/TiCN Films’, Lubricants, 11(1), p. 21. doi:10.3390/lubricants11010021.
IEEE
Y. Lyu, Q. Zhang, Y. Liu, X. Deng, H. Sun, and M. Mo, “Effect of Microstructure of TiN /TiCN Layer on the Structural, Mechanical and Tribological Properties of the Ti/TiN/TiCN Films,” Lubricants, vol. 11, no. 1, p. 21, 2023, doi: 10.3390/lubricants11010021.
BibTeX
@article{lyu2023effect,
title = {{Effect of Microstructure of TiN /TiCN Layer on the Structural, Mechanical and Tribological Properties of the Ti/TiN/TiCN Films}},
author = {Lyu, Yanhong and Zhang, Qiaoyu and Liu, Yang and Deng, Xinrong and Sun, Huilian and Mo, Min},
journal = {Lubricants},
year = {2023},
volume = {11},
number = {1},
pages = {21},
doi = {10.3390/lubricants11010021},
url = {https://doi.org/10.3390/lubricants11010021}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- crystal orientation
- adhesion strength
- internal stress
- tribological properties
- friction coefficient
- wear-resistant coatings
- room-temperature deposition
- DC magnetron sputtering
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Lyu, Y., Zhang, Q., Liu, Y., Deng, X., Sun, H., & Mo, M. (2023). Effect of Microstructure of TiN /TiCN Layer on the Structural, Mechanical and Tribological Properties of the Ti/TiN/TiCN Films. Lubricants, 11(1), 21. https://doi.org/10.3390/lubricants11010021
How many times has this paper been cited?
9 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Lubricants: sign in and open the PDF from this page.
Who wrote this paper?
Yanhong Lyu, Qiaoyu Zhang, Yang Liu, Xinrong Deng, Huilian Sun, Min Mo.
What is the DOI of this paper?
10.3390/lubricants11010021, permanently at https://doi.org/10.3390/lubricants11010021. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.