Paper · 2017 · Open access
Effect of mating materials on wear properties of amorphous hydrogenated carbon (a-C:H) coating and tetrahedral amorphous carbon (ta-C) coating in base oil boundary lubrication condition
DOAJ (DOAJ: Directory of Open Access Journals), 15, 1–20 · Published 1 January 2017
In brief
“Effect of mating materials on wear properties of amorphous hydrogenated carbon (a-C:H) coating and tetrahedral amorphous carbon (ta-C) coating in base oil boundary lubrication condition” is a 2017 paper by Xiang Li and 4 co-authors, published in DOAJ (DOAJ: Directory of Open Access Journals). OpenAlex counts 17 citations as of 19 November 2026. It is open access under a CC BY-SA licence: the full text is free to read at DOAJ (DOAJ: Directory of Open Access Journals).
- Citations
- 17
- Most cited in
- 2022 (6)
- Field-weighted impact
- 0.50
- Authors
- 5
Abstract
In this study, wear behavior of amorphous hydrogenated carbon (a-C:H) coating and tetrahedral amorphous carbon (ta-C) coating when sliding against various mating materials in base oil boundary lubrication condition is comparatively investigated to find out the optimal combinations of DLC/mating material and corresponding wear mechanism of both DLC coating. Tribological tests were performed in a cylinder-on-disc tribometer, Field Emission Scanning Electron Microscopy, Raman spectroscopy is used for characterization of ta-C and a-C:H worn surface. The results show that the specific wear rate of ta-C coating increases along with the hardness and roughness of mating material increases, while the specific wear rate of a-C:H coating increases together with an increment in the ID/IG ratio. It is concluded that for ta-C coating, local stress concentration-induced microfracture is the main wear mechanism in relative high wear scenario, along with minor graphitization-induced wear which prevails in low wear scenario. On the other hand, a-C:H coating showed that simultaneous generation and removal of the graphitized layer on the contact surface is the predominant wear mechanism.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Li, X., Sawaki, T., Kousaka, H., Murashima, M., & Umehara, N. (2017). Effect of mating materials on wear properties of amorphous hydrogenated carbon (a-C:H) coating and tetrahedral amorphous carbon (ta-C) coating in base oil boundary lubrication condition. DOAJ (DOAJ: Directory of Open Access Journals), 15, 1–20. https://doaj.org/article/6131af28b39345218ff57fbadbc19fca
MLA 9
Li, Xiang, et al. “Effect of mating materials on wear properties of amorphous hydrogenated carbon (a-C:H) coating and tetrahedral amorphous carbon (ta-C) coating in base oil boundary lubrication condition.” DOAJ (DOAJ: Directory of Open Access Journals), vol. 15, 2017, pp. 1–20. https://doaj.org/article/6131af28b39345218ff57fbadbc19fca.
Chicago
Li, Xiang, Toshiya Sawaki, Hiroyuki Kousaka, Motoyuki Murashima, and Noritsugu Umehara. 2017. “Effect of mating materials on wear properties of amorphous hydrogenated carbon (a-C:H) coating and tetrahedral amorphous carbon (ta-C) coating in base oil boundary lubrication condition.” DOAJ (DOAJ: Directory of Open Access Journals) 15: 1–20. https://doaj.org/article/6131af28b39345218ff57fbadbc19fca.
Harvard
Li, X. et al. (2017) ‘Effect of mating materials on wear properties of amorphous hydrogenated carbon (a-C:H) coating and tetrahedral amorphous carbon (ta-C) coating in base oil boundary lubrication condition’, DOAJ (DOAJ: Directory of Open Access Journals), 15, pp. 1–20. Available at: https://doaj.org/article/6131af28b39345218ff57fbadbc19fca.
IEEE
X. Li, T. Sawaki, H. Kousaka, M. Murashima, and N. Umehara, “Effect of mating materials on wear properties of amorphous hydrogenated carbon (a-C:H) coating and tetrahedral amorphous carbon (ta-C) coating in base oil boundary lubrication condition,” DOAJ (DOAJ: Directory of Open Access Journals), vol. 15, pp. 1–20, 2017.
BibTeX
@article{li2017effect,
title = {{Effect of mating materials on wear properties of amorphous hydrogenated carbon (a-C:H) coating and tetrahedral amorphous carbon (ta-C) coating in base oil boundary lubrication condition}},
author = {Li, Xiang and Sawaki, Toshiya and Kousaka, Hiroyuki and Murashima, Motoyuki and Umehara, Noritsugu},
journal = {DOAJ (DOAJ: Directory of Open Access Journals)},
year = {2017},
volume = {15},
pages = {1--20},
url = {https://doaj.org/article/6131af28b39345218ff57fbadbc19fca}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2018 | 1 | |
| 2019 | 1 | |
| 2020 | 1 | |
| 2021 | 2 | |
| 2022 | 6 | |
| 2023 | 4 | |
| 2024 | 1 | |
| 2025 | 1 |
Its field-weighted citation impact is 0.50: it has been cited 0.50 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- diamond-like carbon
- wear mechanisms
- specific wear rate
- microfracture
- graphitization
- worn surface morphology
- tribology
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Li, X., Sawaki, T., Kousaka, H., Murashima, M., & Umehara, N. (2017). Effect of mating materials on wear properties of amorphous hydrogenated carbon (a-C:H) coating and tetrahedral amorphous carbon (ta-C) coating in base oil boundary lubrication condition. DOAJ (DOAJ: Directory of Open Access Journals), 15, 1–20. https://doaj.org/article/6131af28b39345218ff57fbadbc19fca
How many times has this paper been cited?
17 times, according to OpenAlex on 19 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at DOAJ (DOAJ: Directory of Open Access Journals): sign in and open the full text from this page.
Who wrote this paper?
Xiang Li, Toshiya Sawaki, Hiroyuki Kousaka, Motoyuki Murashima, Noritsugu Umehara.
Bibliographic data from OpenAlex (CC0), last checked 19 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.