Journal article · 2007 · Open access

Effect of Fe Addition on Microstructures and Mechanical Properties of Ni- and C-Free Co-Cr-Mo Alloys

Sang-Hak Lee, Naoyuki Nomura, Akihiko Chiba

MATERIALS TRANSACTIONS, 48(8), 2207–2211 · Published 1 January 2007 · DOI 10.2320/matertrans.mra2007004

Open PDFView at the publisherCite this paper

In brief

“Effect of Fe Addition on Microstructures and Mechanical Properties of Ni- and C-Free Co-Cr-Mo Alloys” is a 2007 journal article by Sang-Hak Lee and 2 co-authors, published in MATERIALS TRANSACTIONS. OpenAlex counts 22 citations as of 22 November 2026. It is open access: the full text is free to read at MATERIALS TRANSACTIONS.

Citations
22
Most cited in
2020 (4)
Field-weighted impact
3.05
References
14
Authors
3

Abstract

A series of Co-Cr-Mo alloys with Fe contents ranging from 5 to 20 mass% were prepared in order to study the effect of Fe addition on the microstructures and mechanical properties (tensile strength, yield strength, elongation, and Rockwell C scale hardness) of Ni- and C-free Co-Cr-Mo alloys. Fe was added with the composition of Co-29Cr-6Mo-xFe (where x=0, 5, 10, and 20). Alloys were heat-treated at 1230°C for 3 h and 1250°C for 5 h. These heat treatment conditions were decided as considering pre-heat treatment followed by hot-forging process. An optical microscope and an XRD were used to determine the microstructure and identify the crystal structure. The volume ratio of γ phase to ε phase increases not only with heat treatment temperature and time but also with Fe content. The tensile strength, yield strength, and elongation are significantly improved by Fe addition. However, the tendency toward σ phase formation becomes higher as the Fe content increases, causing a deterioration of mechanical properties. From the viewpoint of mechanical properties, the amount of Fe addition should be less than 10 mass% in pre-heated condition of Co-29Cr-6Mo alloys.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Lee, S.-H., Nomura, N., & Chiba, A. (2007). Effect of Fe Addition on Microstructures and Mechanical Properties of Ni- and C-Free Co-Cr-Mo Alloys. MATERIALS TRANSACTIONS, 48(8), 2207–2211. https://doi.org/10.2320/matertrans.mra2007004

MLA 9

Lee, Sang-Hak, et al. “Effect of Fe Addition on Microstructures and Mechanical Properties of Ni- and C-Free Co-Cr-Mo Alloys.” MATERIALS TRANSACTIONS, vol. 48, no. 8, 2007, pp. 2207–2211. https://doi.org/10.2320/matertrans.mra2007004.

Chicago

Lee, Sang-Hak, Naoyuki Nomura, and Akihiko Chiba. 2007. “Effect of Fe Addition on Microstructures and Mechanical Properties of Ni- and C-Free Co-Cr-Mo Alloys.” MATERIALS TRANSACTIONS 48 (8): 2207–2211. https://doi.org/10.2320/matertrans.mra2007004.

Harvard

Lee, S.-H., Nomura, N. and Chiba, A. (2007) ‘Effect of Fe Addition on Microstructures and Mechanical Properties of Ni- and C-Free Co-Cr-Mo Alloys’, MATERIALS TRANSACTIONS, 48(8), pp. 2207–2211. doi:10.2320/matertrans.mra2007004.

IEEE

S.-H. Lee, N. Nomura, and A. Chiba, “Effect of Fe Addition on Microstructures and Mechanical Properties of Ni- and C-Free Co-Cr-Mo Alloys,” MATERIALS TRANSACTIONS, vol. 48, no. 8, pp. 2207–2211, 2007, doi: 10.2320/matertrans.mra2007004.

BibTeX

@article{lee2007effect,
  title     = {{Effect of Fe Addition on Microstructures and Mechanical Properties of Ni- and C-Free Co-Cr-Mo Alloys}},
  author    = {Lee, Sang-Hak and Nomura, Naoyuki and Chiba, Akihiko},
  journal   = {MATERIALS TRANSACTIONS},
  year      = {2007},
  volume    = {48},
  number    = {8},
  pages     = {2207--2211},
  doi       = {10.2320/matertrans.mra2007004},
  url       = {https://doi.org/10.2320/matertrans.mra2007004}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201211
201311
201411
201533
201611
201711
201933
202044
202111
202311

Its field-weighted citation impact is 3.05: it has been cited 3.05 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep

  • CoCrMo alloy
  • iron addition
  • microstructure
  • mechanical properties
  • tensile strength
  • yield strength
  • elongation
  • hardness

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Lee, S.-H., Nomura, N., & Chiba, A. (2007). Effect of Fe Addition on Microstructures and Mechanical Properties of Ni- and C-Free Co-Cr-Mo Alloys. MATERIALS TRANSACTIONS, 48(8), 2207–2211. https://doi.org/10.2320/matertrans.mra2007004

How many times has this paper been cited?

22 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at MATERIALS TRANSACTIONS: sign in and open the PDF from this page.

Who wrote this paper?

Sang-Hak Lee, Naoyuki Nomura, Akihiko Chiba.

What is the DOI of this paper?

10.2320/matertrans.mra2007004, permanently at https://doi.org/10.2320/matertrans.mra2007004. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.