Journal article · 2022 · Open access
Effect of exfoliated MoS2 on the Microstructure, Hardness, and Tribological Properties of Copper Matrix Nanocomposite Fabricated via the Hot Pressing Method
Transactions of the Indian Institute of Metals, 76(1), 195–204 · Published 1 September 2022 · DOI 10.1007/s12666-022-02740-0
In brief
“Effect of exfoliated MoS2 on the Microstructure, Hardness, and Tribological Properties of Copper Matrix Nanocomposite Fabricated via the Hot Pressing Method” is a 2022 journal article by Hossam M. Yehia and 2 co-authors, published in Transactions of the Indian Institute of Metals. OpenAlex counts 24 citations as of 17 November 2026, which puts it in the top 5% of works published in 2022 by citations. It is open access under a CC BY licence: the full text is free to read at Transactions of the Indian Institute of Metals.
- Citations
- 24
- Most cited in
- 2024 (9)
- Field-weighted impact
- 2.08
- References
- 31
- Authors
- 3
Abstract
In this study, copper matrix composites were prepared using the cold and hot pressing technique and then investigated to select the suitable one for the self-lubricating applications. A hybrid of alumina and molybdenum disulfide with a 1:1 ratio by the mechanical milling for 40 h was proceeded to peel the molybdenum disulfide and cover the alumina particles with their layers. Three different samples like Cu, Cu/10 Al2O3, and Cu/hybrid 20(Al2O3–MoS2) were mixed for 15 h. The ball-to-powder ratio in the two mentioned steps was 10:1. The X-ray analysis, HRTEM, Raman spectra, and scanning electron miscopy were used to study the crystal structure, chemical composition, and morphology of the new hybrid and prepared samples. The density was evaluated by the Archimedes method. Mechanical properties, including hardness, wear rate, and coefficient of friction, were investigated. The mixing for 15 h improves the exfoliation of MoS2 flakes inside the copper matrix. A clear hardness improvement was achieved by adding alumina and the mixture of (Al2O3–MoS2). The copper sample reinforced with the hybrid of alumina/MoS2 gave the lowest mechanical wear rate and the lowest average friction coefficient of 0.17.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Yehia, H. M., Ali, A. I., & Abd-Elhameed, E. (2022). Effect of exfoliated MoS2 on the Microstructure, Hardness, and Tribological Properties of Copper Matrix Nanocomposite Fabricated via the Hot Pressing Method. Transactions of the Indian Institute of Metals, 76(1), 195–204. https://doi.org/10.1007/s12666-022-02740-0
MLA 9
Yehia, Hossam M., et al. “Effect of exfoliated MoS2 on the Microstructure, Hardness, and Tribological Properties of Copper Matrix Nanocomposite Fabricated via the Hot Pressing Method.” Transactions of the Indian Institute of Metals, vol. 76, no. 1, 2022, pp. 195–204. https://doi.org/10.1007/s12666-022-02740-0.
Chicago
Yehia, Hossam M., Ahmed I. Ali, and Ehab Abd-Elhameed. 2022. “Effect of exfoliated MoS2 on the Microstructure, Hardness, and Tribological Properties of Copper Matrix Nanocomposite Fabricated via the Hot Pressing Method.” Transactions of the Indian Institute of Metals 76 (1): 195–204. https://doi.org/10.1007/s12666-022-02740-0.
Harvard
Yehia, H. M., Ali, A. I. and Abd-Elhameed, E. (2022) ‘Effect of exfoliated MoS2 on the Microstructure, Hardness, and Tribological Properties of Copper Matrix Nanocomposite Fabricated via the Hot Pressing Method’, Transactions of the Indian Institute of Metals, 76(1), pp. 195–204. doi:10.1007/s12666-022-02740-0.
IEEE
H. M. Yehia, A. I. Ali, and E. Abd-Elhameed, “Effect of exfoliated MoS2 on the Microstructure, Hardness, and Tribological Properties of Copper Matrix Nanocomposite Fabricated via the Hot Pressing Method,” Transactions of the Indian Institute of Metals, vol. 76, no. 1, pp. 195–204, 2022, doi: 10.1007/s12666-022-02740-0.
BibTeX
@article{yehia2022effect,
title = {{Effect of exfoliated MoS2 on the Microstructure, Hardness, and Tribological Properties of Copper Matrix Nanocomposite Fabricated via the Hot Pressing Method}},
author = {Yehia, Hossam M. and Ali, Ahmed I. and Abd-Elhameed, Ehab},
journal = {Transactions of the Indian Institute of Metals},
year = {2022},
volume = {76},
number = {1},
pages = {195--204},
doi = {10.1007/s12666-022-02740-0},
url = {https://doi.org/10.1007/s12666-022-02740-0}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2022 | 4 | |
| 2023 | 5 | |
| 2024 | 9 | |
| 2025 | 4 | |
| 2026 | 2 |
Its field-weighted citation impact is 2.08: it has been cited 2.08 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Aluminum Alloys Composites Properties
- copper matrix nanocomposites
- MoS2
- alumina
- exfoliation
- hot pressing
- self-lubricating materials
- tribological properties
- hardness
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Yehia, H. M., Ali, A. I., & Abd-Elhameed, E. (2022). Effect of exfoliated MoS2 on the Microstructure, Hardness, and Tribological Properties of Copper Matrix Nanocomposite Fabricated via the Hot Pressing Method. Transactions of the Indian Institute of Metals, 76(1), 195–204. https://doi.org/10.1007/s12666-022-02740-0
How many times has this paper been cited?
24 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Transactions of the Indian Institute of Metals: sign in and open the PDF from this page.
Who wrote this paper?
Hossam M. Yehia, Ahmed I. Ali, Ehab Abd-Elhameed.
What is the DOI of this paper?
10.1007/s12666-022-02740-0, permanently at https://doi.org/10.1007/s12666-022-02740-0. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.