Dissertation · 2015 · Open access
Effect of dilution on microstructure and corrosion resistance of AWS ER NiCrMo-14 alloy overlay welded by gtaw cold wire feed
LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · Published 1 January 2015
In brief
“Effect of dilution on microstructure and corrosion resistance of AWS ER NiCrMo-14 alloy overlay welded by gtaw cold wire feed” is a 2015 dissertation by Émerson Mendonça Miná, published in LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas).
- Citations
- 0
- Authors
- 1
Abstract
The overlay welding is a way for manufacture of materials that need specific properties on the surface. Typically, a low level of dilution is required to minimize the chemical changes that modify the overlay properties. The standard ISO 10423 establishes means for assessing the quality for the alloy AWS ER NiCrMo-3, that set a suitable overlay to severe conditions of corrosion those clads that have until 5% wt of iron content in the fusion zone, while for applications of moderate corrosion the criteria is required iron content until 10% wt. However, it is not known what quality criteria should be applied for coatings using noble alloys such as alloy AWS ER NiCrMo-14. The aim of this study was evaluate the effect of dilution on the microstructure, microsegregation and corrosion resistance of AWS ER NiCrMo-14 alloy overlay welded by GTAW cold wire feed process. Each clad was welded on ASTM A36 steel by GTAW process with the addition of a single cold wire layer of alloy AWS ER NiCrMo-14. The microstructure was characterized by scanning electron microscopy (SEM) and have not identified significant changes to the variation of dilution. It was observed on all overlays a γ-CFC matrix with dispersed precipitates in interdendritic regions. The microsegregation of the overlays was measured by energy dispersive of X-ray spectroscopy (EDS) chemical composition analysis, which showed that the Fe incorporation potential into the solid (k > 1) increased for increments in dilution. The Mo showed a high potential to segregate to liquid and your coefficient k increased with increments in dilution. The Cr and W showed a small drop in k partition coefficient with increases in the dilution. The precipitates were characterized by X-ray diffraction (XRD), EDS analysis using the transmission electron microscopy (TEM) and SEM and electron diffraction analysis. It were identified the phases σ, μ and P. The overlays were subjected to the corrosion test according to ASTM G48 C method to obtaining the critical pitting temperature (TCP) of each clad. The overlay with dilution of about 6% supported the maximum temperatures stipulated by the standard, 85 °C. While clads with dilutions of about 12% and 13% showed 55°C and 50°C TCP, respectively. Other overlays with dilutions over 20% failed in 45 °C. The corrosion mechanism apparently was initiated along solidification grain boundaries and/or in the interface between the precipitates and the matrix
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Miná, É. M. (2015). Effect of dilution on microstructure and corrosion resistance of AWS ER NiCrMo-14 alloy overlay welded by gtaw cold wire feed. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://www.repositorio.ufc.br/handle/riufc/13785
MLA 9
Miná, Émerson Mendonça. “Effect of dilution on microstructure and corrosion resistance of AWS ER NiCrMo-14 alloy overlay welded by gtaw cold wire feed.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2015. http://www.repositorio.ufc.br/handle/riufc/13785.
Chicago
Miná, Émerson Mendonça. 2015. “Effect of dilution on microstructure and corrosion resistance of AWS ER NiCrMo-14 alloy overlay welded by gtaw cold wire feed.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://www.repositorio.ufc.br/handle/riufc/13785.
Harvard
Miná, É. M. (2015) ‘Effect of dilution on microstructure and corrosion resistance of AWS ER NiCrMo-14 alloy overlay welded by gtaw cold wire feed’, LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). Available at: http://www.repositorio.ufc.br/handle/riufc/13785.
IEEE
É. M. Miná, “Effect of dilution on microstructure and corrosion resistance of AWS ER NiCrMo-14 alloy overlay welded by gtaw cold wire feed,” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2015.
BibTeX
@phdthesis{mina2015effect,
title = {{Effect of dilution on microstructure and corrosion resistance of AWS ER NiCrMo-14 alloy overlay welded by gtaw cold wire feed}},
author = {Miná, Émerson Mendonça},
year = {2015},
url = {http://www.repositorio.ufc.br/handle/riufc/13785}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- dilution
- overlay welding
- nickel-based alloys
- TIG welding
- microsegregation
- partition coefficient
- microstructure
- corrosion resistance
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Miná, É. M. (2015). Effect of dilution on microstructure and corrosion resistance of AWS ER NiCrMo-14 alloy overlay welded by gtaw cold wire feed. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://www.repositorio.ufc.br/handle/riufc/13785
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas): sign in and open the full text from this page.
Who wrote this paper?
Émerson Mendonça Miná.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.