Paper · 2016 · Open access

Effect of CVD-Diamond on the Tribological and Mechanical Performance of Titanium Alloy (Ti6Al4V)

Sajad Hussain Din, M. A. Shah, N.A. Sheikh

DOAJ (DOAJ: Directory of Open Access Journals) · Published 1 December 2016

Open full textCite this paper

In brief

“Effect of CVD-Diamond on the Tribological and Mechanical Performance of Titanium Alloy (Ti6Al4V)” is a 2016 paper by Sajad Hussain Din and 2 co-authors, published in DOAJ (DOAJ: Directory of Open Access Journals). OpenAlex counts 13 citations as of 17 November 2026. It is open access under a CC BY-SA licence: the full text is free to read at DOAJ (DOAJ: Directory of Open Access Journals).

Citations
13
Most cited in
2022 (3)
Field-weighted impact
0.82
Authors
3

Abstract

Nano-crystalline diamond and microcrystalline diamond films have been separately deposited on chemically treated titanium alloy (Ti6Al4V) substrates from methane/hydrogen (CH4/H2) gas mixture, using hot filament chemical vapor deposition technique. The coatings have architecture of Ti6Al4V/NCD and Ti6Al4V/MCD. The as grown nano-crystalline diamond and microcrystalline diamond films were characterized using high resolution scanning electron microscope and Raman’s spectroscopy. The residual stresses along the surface of nano-crystalline diamond coatings and micro-crystalline diamond coatings are compressive in nature as shown by the Raman spectroscopy. Nanoindentation tests were also conducted using Berkovich nanoindenter for the purpose of measurement of hardness and elastic modulus values. The indentation depth for microcrystalline diamond coating was 65 nm, whereas for nanocrystalline diamond coating, it was 72 nm. Microcrystalline diamond and nanocrystalline diamond coatings have yielded the super-hardness of ~55 G Pa and ~38 G Pa respectively. The average coefficient of friction of microcrystalline diamond and nanocrystalline diamond coatings decrease from 0.305-0.27 to 0.068-0.053, respectively, when the load is increased from 1 N to 10 N. However, for conventional Ti6Al4V substrate the average coefficient of friction changes from 0.625 to 0.38 under the same input conditions.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Din, S. H., Shah, M. A., & Sheikh, N. (2016). Effect of CVD-Diamond on the Tribological and Mechanical Performance of Titanium Alloy (Ti6Al4V). DOAJ (DOAJ: Directory of Open Access Journals). https://doaj.org/article/7282518a83a04a1780a9a163801127b2

MLA 9

Din, Sajad Hussain, et al. “Effect of CVD-Diamond on the Tribological and Mechanical Performance of Titanium Alloy (Ti6Al4V).” DOAJ (DOAJ: Directory of Open Access Journals), 2016. https://doaj.org/article/7282518a83a04a1780a9a163801127b2.

Chicago

Din, Sajad Hussain, M. A. Shah, and N.A. Sheikh. 2016. “Effect of CVD-Diamond on the Tribological and Mechanical Performance of Titanium Alloy (Ti6Al4V).” DOAJ (DOAJ: Directory of Open Access Journals). https://doaj.org/article/7282518a83a04a1780a9a163801127b2.

Harvard

Din, S. H., Shah, M. A. and Sheikh, N. (2016) ‘Effect of CVD-Diamond on the Tribological and Mechanical Performance of Titanium Alloy (Ti6Al4V)’, DOAJ (DOAJ: Directory of Open Access Journals). Available at: https://doaj.org/article/7282518a83a04a1780a9a163801127b2.

IEEE

S. H. Din, M. A. Shah, and N. Sheikh, “Effect of CVD-Diamond on the Tribological and Mechanical Performance of Titanium Alloy (Ti6Al4V),” DOAJ (DOAJ: Directory of Open Access Journals), 2016.

BibTeX

@article{din2016effect,
  title     = {{Effect of CVD-Diamond on the Tribological and Mechanical Performance of Titanium Alloy (Ti6Al4V)}},
  author    = {Din, Sajad Hussain and Shah, M. A. and Sheikh, N.A.},
  journal   = {DOAJ (DOAJ: Directory of Open Access Journals)},
  year      = {2016},
  url       = {https://doaj.org/article/7282518a83a04a1780a9a163801127b2}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201822
201922
202011
202111
202233
202311
202411
202622

Its field-weighted citation impact is 0.82: it has been cited 0.82 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • Ti-6Al-4V
  • titanium alloys
  • hot filament chemical vapor deposition
  • hydrogen-enriched natural gas
  • residual stress
  • compressive residual stress
  • hardness
  • elastic modulus

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Din, S. H., Shah, M. A., & Sheikh, N. (2016). Effect of CVD-Diamond on the Tribological and Mechanical Performance of Titanium Alloy (Ti6Al4V). DOAJ (DOAJ: Directory of Open Access Journals). https://doaj.org/article/7282518a83a04a1780a9a163801127b2

How many times has this paper been cited?

13 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at DOAJ (DOAJ: Directory of Open Access Journals): sign in and open the full text from this page.

Who wrote this paper?

Sajad Hussain Din, M. A. Shah, N.A. Sheikh.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.