Journal article · 2017 · Open access

Effect of Cu Content on Hardness and Wear Properties in (Cr, Mo, Cu)N Film

Yuta Suzuki, Yuji Sutou, Daisuke Ando, Junichi Koike

Journal of the Japan Institute of Metals and Materials, 81(5), 270–275 · Published 1 January 2017 · DOI 10.2320/jinstmet.jbw201613

Open PDFView at the publisherCite this paper

In brief

“Effect of Cu Content on Hardness and Wear Properties in (Cr, Mo, Cu)N Film” is a 2017 journal article by Yuta Suzuki and 3 co-authors, published in Journal of the Japan Institute of Metals and Materials. OpenAlex counts 2 citations as of 17 November 2026. It is open access: the full text is free to read at Journal of the Japan Institute of Metals and Materials.

Citations
2
Most cited in
2021 (1)
References
20
Authors
4

Abstract

Effects of Cu addition on hardness and wear properties of (Cr, Mo)N films were investigated by nanoindentation and ball-on-disk measurements. (Cr100-x-yMoxCuy)N films were deposited onto a stainless steel substrate by a reactive DC magnetron sputtering of Cr50Mo50 and Cu targets under the mixture of argon (45 ccm) and nitrogen (5 ccm) gases. The hardness of the film increased from 21.9 to 23.5 GPa by Cu addition of y=3.4 of Cu addition and then drastically decreased with further increasing Cu addition. The drastic decrease in hardness is caused by the formation of amorphous structure. In crystalline films, it was found that the change of hardness obeys the inverse Hall-Petch relationship. The wear mechanism of the film was changed by increasing Cu addition, adhesive wear (y=0), lubricated wear (3.4 ≤ y≤ 12.6) and abrasive wear (y≥ 20.4). It was also found from wear track observation that the lubricated wear in the Cu content region of 3.4 ≤ y≤ 12.6 was obtained by the formation of the oxide debris resulted from the film with as small amount of Cu (3.4 ≤ y ≤ 12.6). With further increase in Cu content (y≥ 20.4), the film was severely worn because of its low hardness of the amorphous film.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Suzuki, Y., Sutou, Y., Ando, D., & Koike, J. (2017). Effect of Cu Content on Hardness and Wear Properties in (Cr, Mo, Cu)N Film. Journal of the Japan Institute of Metals and Materials, 81(5), 270–275. https://doi.org/10.2320/jinstmet.jbw201613

MLA 9

Suzuki, Yuta, et al. “Effect of Cu Content on Hardness and Wear Properties in (Cr, Mo, Cu)N Film.” Journal of the Japan Institute of Metals and Materials, vol. 81, no. 5, 2017, pp. 270–275. https://doi.org/10.2320/jinstmet.jbw201613.

Chicago

Suzuki, Yuta, Yuji Sutou, Daisuke Ando, and Junichi Koike. 2017. “Effect of Cu Content on Hardness and Wear Properties in (Cr, Mo, Cu)N Film.” Journal of the Japan Institute of Metals and Materials 81 (5): 270–275. https://doi.org/10.2320/jinstmet.jbw201613.

Harvard

Suzuki, Y. et al. (2017) ‘Effect of Cu Content on Hardness and Wear Properties in (Cr, Mo, Cu)N Film’, Journal of the Japan Institute of Metals and Materials, 81(5), pp. 270–275. doi:10.2320/jinstmet.jbw201613.

IEEE

Y. Suzuki, Y. Sutou, D. Ando, and J. Koike, “Effect of Cu Content on Hardness and Wear Properties in (Cr, Mo, Cu)N Film,” Journal of the Japan Institute of Metals and Materials, vol. 81, no. 5, pp. 270–275, 2017, doi: 10.2320/jinstmet.jbw201613.

BibTeX

@article{suzuki2017effect,
  title     = {{Effect of Cu Content on Hardness and Wear Properties in (Cr, Mo, Cu)N Film}},
  author    = {Suzuki, Yuta and Sutou, Yuji and Ando, Daisuke and Koike, Junichi},
  journal   = {Journal of the Japan Institute of Metals and Materials},
  year      = {2017},
  volume    = {81},
  number    = {5},
  pages     = {270--275},
  doi       = {10.2320/jinstmet.jbw201613},
  url       = {https://doi.org/10.2320/jinstmet.jbw201613}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • copper addition
  • hardness
  • wear behavior
  • amorphous structure
  • inverse Hall-Petch relationship
  • adhesive wear
  • lubricated wear
  • abrasive wear

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Suzuki, Y., Sutou, Y., Ando, D., & Koike, J. (2017). Effect of Cu Content on Hardness and Wear Properties in (Cr, Mo, Cu)N Film. Journal of the Japan Institute of Metals and Materials, 81(5), 270–275. https://doi.org/10.2320/jinstmet.jbw201613

How many times has this paper been cited?

2 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of the Japan Institute of Metals and Materials: sign in and open the PDF from this page.

Who wrote this paper?

Yuta Suzuki, Yuji Sutou, Daisuke Ando, Junichi Koike.

What is the DOI of this paper?

10.2320/jinstmet.jbw201613, permanently at https://doi.org/10.2320/jinstmet.jbw201613. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.