Dissertation · 2018 · Open access

Efeito dos ciclos térmicos da manufatura aditiva por soldagem a arco sobre a dureza e microestrutura da zac de um ferro fundido nodular

Henrique Nardon Ferraresi

Universidade Federal de Uberlândia · Published 28 August 2018 · DOI 10.14393/ufu.di.2018.987

Open PDFView at the publisherCite this paper

In brief

“Efeito dos ciclos térmicos da manufatura aditiva por soldagem a arco sobre a dureza e microestrutura da zac de um ferro fundido nodular” is a 2018 dissertation by Henrique Nardon Ferraresi, published in Universidade Federal de Uberlândia. OpenAlex counts 5 citations as of 22 November 2026. It is open access: the full text is free to read.

Citations
5
Most cited in
2022 (2)
References
33
Authors
1

Abstract

In the automotive sector, molds and dies for sheet forming have been manufactured in cast iron, economically replacing tool steel, which present higher costs for machining. The change in the design of these matrices, due to the launch of new products, implies the premature replacement of these tools. However, the manufacturing of a new matrix by casting has high costs and long lead times. One solution would be to manufacture cast iron molds in a custom way, but without the need for molding or machining from a block. The Arc Welding Additive Manufacturing (MASA) with the GMAW (Gas Metal Arc Welding) process is a promising technique for this type of customization. The MASA consists of the manufacture of metal preforms from the deposition of multilayer of weld beads on a substrate. One of the great challenges of MASA for casting molds and die cast irons is related to the formation of a high hardness microstructure in the region of the Heat Affected Zone (HAZ) and in the Partially-Melted Zone (PMZ) during welding. These fragile regions, together with the contraction tensions, can lead to the formation of cracks in the matrix application. In this sense, the present work has as objective to determine the effects of the thermal cycle of the MASA-GMAW on the hardness of HAZ and PMZ of a nodular cast iron substrate, from the application of buttery layers. To achieve this goal, 5 layers of buttery were staggered and the respective thermal welding cycles were acquired by inserting a thermocouple into the substrate. In this step, the microstructural and microhardness transformations that occurred in the HAZ and PMZ of the 1st Layer were analyzed systematically due to the subsequent layers (2nd, 3rd, 4th and 5th). With the actual welding thermal cycles it was possible to perform physical simulations through a HAZ simulator. It was concluded through the actual welding and the simulations that the subsequent layers of weld cause the ZAC tempering of the cast iron. Through the simulation, it was also possible to control the microhardness and the final microstructure type of the HAZ through the preheating, intercalation and post-heating temperature. Finally, the validation of the study occurred through the construction of a folded matrix in reduced dimensions and the submission of the same to work. The results showed that the use of MASA-GMAW for the customization of a nodular cast iron matrix is adequate and promising.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Ferraresi, H. N. (2018). Efeito dos ciclos térmicos da manufatura aditiva por soldagem a arco sobre a dureza e microestrutura da zac de um ferro fundido nodular. Universidade Federal de Uberlândia. https://doi.org/10.14393/ufu.di.2018.987

MLA 9

Ferraresi, Henrique Nardon. “Efeito dos ciclos térmicos da manufatura aditiva por soldagem a arco sobre a dureza e microestrutura da zac de um ferro fundido nodular.” Universidade Federal de Uberlândia, 2018. https://doi.org/10.14393/ufu.di.2018.987.

Chicago

Ferraresi, Henrique Nardon. 2018. “Efeito dos ciclos térmicos da manufatura aditiva por soldagem a arco sobre a dureza e microestrutura da zac de um ferro fundido nodular.” Universidade Federal de Uberlândia. https://doi.org/10.14393/ufu.di.2018.987.

Harvard

Ferraresi, H. N. (2018) ‘Efeito dos ciclos térmicos da manufatura aditiva por soldagem a arco sobre a dureza e microestrutura da zac de um ferro fundido nodular’, Universidade Federal de Uberlândia. doi:10.14393/ufu.di.2018.987.

IEEE

H. N. Ferraresi, “Efeito dos ciclos térmicos da manufatura aditiva por soldagem a arco sobre a dureza e microestrutura da zac de um ferro fundido nodular,” Universidade Federal de Uberlândia, 2018, doi: 10.14393/ufu.di.2018.987.

BibTeX

@phdthesis{ferraresi2018efeito,
  title     = {{Efeito dos ciclos térmicos da manufatura aditiva por soldagem a arco sobre a dureza e microestrutura da zac de um ferro fundido nodular}},
  author    = {Ferraresi, Henrique Nardon},
  year      = {2018},
  doi       = {10.14393/ufu.di.2018.987},
  url       = {https://doi.org/10.14393/ufu.di.2018.987}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202222
202311
202411
202511

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes

  • gas metal arc welding
  • ductile iron
  • heat-affected zone
  • partially melted zone
  • microhardness
  • microstructure
  • welding thermal cycle
  • casting molds

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Ferraresi, H. N. (2018). Efeito dos ciclos térmicos da manufatura aditiva por soldagem a arco sobre a dureza e microestrutura da zac de um ferro fundido nodular. Universidade Federal de Uberlândia. https://doi.org/10.14393/ufu.di.2018.987

How many times has this paper been cited?

5 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: sign in and open the PDF from this page.

Who wrote this paper?

Henrique Nardon Ferraresi.

What is the DOI of this paper?

10.14393/ufu.di.2018.987, permanently at https://doi.org/10.14393/ufu.di.2018.987. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.