Dissertation · 2006 · Open access

Efeito de parâmetros geométricos e operacionais sobre o comportamento do pó fluxante no molde de lingotamento contínuo de placas

Carlos Eduardo Passagli Barral

Americanae (AECID Library) · Published 11 April 2006

Open full textCite this paper

In brief

“Efeito de parâmetros geométricos e operacionais sobre o comportamento do pó fluxante no molde de lingotamento contínuo de placas” is a 2006 dissertation by Carlos Eduardo Passagli Barral, published in Americanae (AECID Library). OpenAlex counts 2 citations as of 22 November 2026. It is open access: the full text is free to read at Americanae (AECID Library).

Citations
2
Most cited in
2016 (1)
Authors
1

Abstract

Fluid flow in continuous casting reactors, tundish and mould, has a significant effect on the product quality and can also limit the productivity that can be attained in the process. In the continuous casting mould, an increase in productivity is always associated to increases in the casting speed, in the liquid metal flowrate and consequently, in the levels of turbulence, particularly in the upper regions, near the interface between liquid steel and mould flux. These higher levels of turbulence can cause emulsification of the mold flux and lead to entrapment of non metallic particles in the liquid steel. The configuration of the submerged entry nozzle used to deliver liquid metal into the mould also plays a significant role in determining the levels of turbulence near the interface between liquid steel and mould flux. In the present work, the effects of the configurations of the submerged entry nozzle, of the properties of the mould flux and of the operational parameters of the continuous casting machine on the behaviors of the interface between liquid steel and mould flux and on the degree of emulsification of the mould flux have been studied using physical modeling. The physical model reproduced Usiminas N. 2 continuous caster, in a 1:3 scale. The model was completely transparent to enable the visualization of the interface between liquid steel and mould flux. These two fluids were simulated by water and silicone oil, respectively. In the experiments with the physical model, the images of the interface between water and oil were recorded using a video camera. These images were post processed to determine the degree of emulsification of the oil. The velocity of the water near theinterface with the oil was also estimated and compared to prediction of a mathematical models. The results indicated that emulsification is caused by the turbulence in interface between water and oil (steel and mold flux). Among the parameters that were investigated, the penetration of the nozzle in the liquid and the angle of the ports presented the most significant effects on emulsification.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Barral, C. E. P. (2006). Efeito de parâmetros geométricos e operacionais sobre o comportamento do pó fluxante no molde de lingotamento contínuo de placas. Americanae (AECID Library). http://hdl.handle.net/1843/BUOS-8DPGE4

MLA 9

Barral, Carlos Eduardo Passagli. “Efeito de parâmetros geométricos e operacionais sobre o comportamento do pó fluxante no molde de lingotamento contínuo de placas.” Americanae (AECID Library), 2006. http://hdl.handle.net/1843/BUOS-8DPGE4.

Chicago

Barral, Carlos Eduardo Passagli. 2006. “Efeito de parâmetros geométricos e operacionais sobre o comportamento do pó fluxante no molde de lingotamento contínuo de placas.” Americanae (AECID Library). http://hdl.handle.net/1843/BUOS-8DPGE4.

Harvard

Barral, C. E. P. (2006) ‘Efeito de parâmetros geométricos e operacionais sobre o comportamento do pó fluxante no molde de lingotamento contínuo de placas’, Americanae (AECID Library). Available at: http://hdl.handle.net/1843/BUOS-8DPGE4.

IEEE

C. E. P. Barral, “Efeito de parâmetros geométricos e operacionais sobre o comportamento do pó fluxante no molde de lingotamento contínuo de placas,” Americanae (AECID Library), 2006.

BibTeX

@phdthesis{barral2006efeito,
  title     = {{Efeito de parâmetros geométricos e operacionais sobre o comportamento do pó fluxante no molde de lingotamento contínuo de placas}},
  author    = {Barral, Carlos Eduardo Passagli},
  year      = {2006},
  url       = {http://hdl.handle.net/1843/BUOS-8DPGE4}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics

  • submerged entry nozzle
  • turbulent flow
  • casting speed
  • physical modeling

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Barral, C. E. P. (2006). Efeito de parâmetros geométricos e operacionais sobre o comportamento do pó fluxante no molde de lingotamento contínuo de placas. Americanae (AECID Library). http://hdl.handle.net/1843/BUOS-8DPGE4

How many times has this paper been cited?

2 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Americanae (AECID Library): sign in and open the full text from this page.

Who wrote this paper?

Carlos Eduardo Passagli Barral.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.