Dissertation · 2017 · Open access
Efecto de los parámetros de laminación y post-tratamiento térmico por inducción en la mejora de propiedades mecánicas de aceros microaleados.
Depósito Académico Digital Universidad de Navarra (University of Navarra) · Published 1 January 2017
In brief
“Efecto de los parámetros de laminación y post-tratamiento térmico por inducción en la mejora de propiedades mecánicas de aceros microaleados.” is a 2017 dissertation by G. Larzabal Primo, published in Depósito Académico Digital Universidad de Navarra (University of Navarra). OpenAlex counts 3 citations as of 22 November 2026. It is open access: the full text is free to read at Depósito Académico Digital Universidad de Navarra (University of Navarra).
- Citations
- 3
- Most cited in
- 2018 (1)
- Authors
- 1
Abstract
High Strength Low Alloy (HSLA) steels are widely used in many industrial sectors such as, infrastructure edification, automotive and naval industry. These sectors demand materials that meet different requirements, which change depending on the application. In response to the demands imposed by the market, nowadays there is a severe control over the composition of the material the process parameters, which are the main factors controlling the microstructure and therefore, the mechanical properties of the material. That is the main reason why the relationship between process parameters, microstructure and mechanical properties must be studied. \nThis thesis is framed in three research projects. “Desarrollo de las bases metalúrgicas para la simulación numérica de los procesos de laminación y el desarrollo de aceros AHSS de tercera generación”(PI-2014-1-129) financed by the Basque Government, “Nanometer-sized particle hardening of structural steels” (MAT2012-31056) financed by the Ministry of Economy and Competitiveness of Spain and “Virtual Rolling Mill” (RFSR-CT 2013-00007) of the European RFCS program. The latter has been carried out in a consortium of several universities, research centers and European companies. In all the projects, three steels with the same content of carbon but with different amount of niobium, molybdenum and titanium have been used. \nFirstly, the effect of the composition and the different process parameters on the mechanical properties of the hot rolled sheet coils have been studied. With that purpose, plane strain compression tests have been carried out with all the microalloyed steels of the study, modifying the coiling temperature. From the obtained samples, the generated microstructures have been analyzed via different characterization techniques: optical microscopy, field emission gun scanning electron microscopy (FEG-SEM), transmission electron microscopy (TEM) and electron backscatter diffraction (EBSD) technique. Tensile and Charpy specimens have been machined from the plane strain compression samples to analyze the effect of the coiling temperature on the tensile and toughness properties. Afterwards, with the obtained results from the microstructural analysis and the tensile tests, the contributions of every strengthening mechanisms (solid solution, grain size, dislocation density, presence of secondary phases and fine precipitation) have been estimated for each condition of composition and coiling temperature. Likewise, an equation to predict the impact transition temperature has been developed which takes into account the effect of microstructural heterogeneity and the presence of hard secondary phases such as MA islands. Moreover, with the aim of exploring the possibility of achieving an additional microstructural refinement, the influence of the time between the last deformation pass and the accelerated cooling has been studied. Therefore, plane compression tests have been carried out modifying…
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Primo, G. L. (2017). Efecto de los parámetros de laminación y post-tratamiento térmico por inducción en la mejora de propiedades mecánicas de aceros microaleados. Depósito Académico Digital Universidad de Navarra (University of Navarra). https://hdl.handle.net/10171/45292
MLA 9
Primo, G. Larzabal. “Efecto de los parámetros de laminación y post-tratamiento térmico por inducción en la mejora de propiedades mecánicas de aceros microaleados.” Depósito Académico Digital Universidad de Navarra (University of Navarra), 2017. https://hdl.handle.net/10171/45292.
Chicago
Primo, G. Larzabal. 2017. “Efecto de los parámetros de laminación y post-tratamiento térmico por inducción en la mejora de propiedades mecánicas de aceros microaleados.” Depósito Académico Digital Universidad de Navarra (University of Navarra). https://hdl.handle.net/10171/45292.
Harvard
Primo, G. L. (2017) ‘Efecto de los parámetros de laminación y post-tratamiento térmico por inducción en la mejora de propiedades mecánicas de aceros microaleados.’, Depósito Académico Digital Universidad de Navarra (University of Navarra). Available at: https://hdl.handle.net/10171/45292.
IEEE
G. L. Primo, “Efecto de los parámetros de laminación y post-tratamiento térmico por inducción en la mejora de propiedades mecánicas de aceros microaleados.,” Depósito Académico Digital Universidad de Navarra (University of Navarra), 2017.
BibTeX
@phdthesis{primo2017efecto,
title = {{Efecto de los parámetros de laminación y post-tratamiento térmico por inducción en la mejora de propiedades mecánicas de aceros microaleados.}},
author = {Primo, G. Larzabal},
year = {2017},
url = {https://hdl.handle.net/10171/45292}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2018 | 1 | |
| 2022 | 1 | |
| 2026 | 1 |
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels
- microalloyed steel
- high-strength low-alloy steel
- coiling temperature
- induction heat treatment
- mechanical properties
- microstructure
- strengthening mechanisms
- solid solution strengthening
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Primo, G. L. (2017). Efecto de los parámetros de laminación y post-tratamiento térmico por inducción en la mejora de propiedades mecánicas de aceros microaleados. Depósito Académico Digital Universidad de Navarra (University of Navarra). https://hdl.handle.net/10171/45292
How many times has this paper been cited?
3 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Depósito Académico Digital Universidad de Navarra (University of Navarra): sign in and open the full text from this page.
Who wrote this paper?
G. Larzabal Primo.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.